Question about Teac Audio Players & Recorders

Open Question

Need remote control code for TEAC DC-D4550

The above system is (very successfully) providing the sound output from my Dish Network Satellite TV receiver.  However, I do not have the original TEAC remote and the couple of codes provided by Dish Network do not successfully program the Dish Network remote to control the TEAC system.   Can anybody out there provide a code that works?   Many thanks for anything you can do!

Posted by on

5 Suggested Answers

  • 4102 Answers

SOURCE: TEAC DC-D2800 Digital Compact Hi-Fi System

check all wires to speaker are correct also if you take the unit apart you might find that their is 2 or 3 fuses inside it might be that one of these has blown.
Also check no dust has over heated anything as this is often the case when anything electrical has been off for a while.
Let me know how you get on ok

Posted on Dec 10, 2007

SOURCE: Onkyo DR-UN7 DVD Receiver remote control code

Nowdays there are CLONE type remotes available form electrical stores.

These clone type remotes carry all the codes necessary to work TV, Vdeos, CD players and other domestic sound systems.

I would suggest that you visit one of these stores and see what they have for your ONKYO system, the cost is not great and you will walk out with a complete remote for your system that will work all the other controls as well..
The stores have a fold out paper list, (thats very long) showing model and manufacturer detail for what codes you need to enter into the new remote to make it compatible wuith your ONKYO system.

Cheers From YUBEUT

Posted on Feb 15, 2008

jango2
  • 38 Answers

SOURCE: manual for operation and handling

Hi Jogindar,
The manual costs 15$ to download here (with service manual)
http://www.manuals-in-pdf.com/FHG70-p-154004.html

Specs for the product with explanations here:
http://www.sony.com.au/catalog/product.jsp?id=FHG70

Do you have a specific question about operation that we can help you with?.
Jango.

Posted on Mar 04, 2008

  • 1 Answer

SOURCE: remote control program codes

want to know the code for bose lifestyle5.

Posted on Jul 23, 2008

  • 1 Answer

SOURCE: SET CODE FOR RCA MODEL RS2654

I need to program my stereo Durabrand (HM3817DT) to operate with universal remote Philips (SRU4105WM/17) can you please get me the search code for it.

Thank you

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codes for innovage universal remote to program it with my dish network box


Hi Gw, my name is Mike Houston a Social Media Representative at DISH. I understand you want to program your innvoage remote to our DISH receiver. When we send out our DISH receivers we will include our own DISH universal remotes that can control many different components like; HDTV, surround sound receivers and sound bars. We do not have the codes for other universal remotes to work with our system. I will provide you a link explaining in more detail on programming your remote: http://www.ehow.com/way_5501311_innovage-jumbo-universal-remote-instructions.html

Sep 01, 2012 | DISH Network ViP722 DTV Receiver /...

2 Answers

Lost my Dish network remote for the upstairs tv (LG) - which has NO box. Is there anyway to program my TV remote, so I can access the TV staions - turn on the network basically???????


No,the Dish Network satalite box signals require it own remote for it INFER RED INPUT and INFER RED OUTPUT signals.Call Dish Network customer service ask for a another original Dish Network remote.U pay $5 or $6 dollars a month for the satalite box as rental.They should wave the fee or charge u very little for a another remote.

Sep 05, 2011 | Universal Remote Control Dish Network...

1 Answer

I have a Sony Bravia TV, only a year old, had several power outages and suddenly RM-YD028 TV remote is not working at all. On the Dish network remote, the satellite controls are working, but not TV...


If neither the DISH Network remote or the TV remote is working for you most likely your remote sensor is going bad. If you'd like to try readdressing the remote follow the steps and procedures below. Codes: 500, 837, 125, 808, 798, 640, 796, 783, 795, 797, 865, 846, 842, 563, 501, 810, 841, 781, 807, 838, 690, 758, 843, 845, 591, 839, 806, 840, 844
To program the remote:
1.) Hold the clear "TV" mode button for four seconds or until all four buttons at the top of the remote are lit.
2.) Press one of the three digit codes listed above followed by pound (#)
3.) Check for functionality by trying the volume power and mute.
Be sure to press the "SAT" button to return to satellite mode if the code works.

Daniel Busa
DISH Network
Customer Service

May 31, 2011 | Sony RMYD028 Remote Control

1 Answer

Ihave a nexxtch remote control and I would appreciate your help to find the code.My tele is call orion.


Hi ladyebird,

Are you trying to program your nexxtch remote to control your receiver? If so, unfortunately you wouldn't be able to set it up like that. Only the DISH Network remote will operate the receiver. You can set up the DISH remote to control your Orion TV by holding the clear TV button until the 4 mode lights flash and then enter a code (from the website provided below) and then hit #. If the code is successful the TV light will flash 3 times.

Here is the website to obtain the code and will also list the instructions: http://www.dishnetwork.com/SupportSection/remote-setup

Nick Franta
DISH Network

Mar 31, 2011 | DISH Network IR Remote Control

1 Answer

Dish remote will not control the tv with any of the codes provided. Is there a solution?


Hello!!! Remotes can be tricky sometimes!!! Try a power scan. It scans the TV for the right code, instead of inputting codes.

1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.

Hope this helps!!

Becki Barned
DISH Network Customer Service

Mar 09, 2011 | RCA DISH Network(r) 311 Satellite System

1 Answer

After setting up a new tv, the dish remote will not work with the satellite. what could be the problem?


mbpope

If I understand you correctly, once you installed your new TV, your DISH remote doesn't allow you to change satellite channels. If this is correct, you will need to readdress the remote to the receiver. I have provided a link with these instructions. Included with the link is instructions for programming the remote to your TV.

http://www.dishnetwork.com/SupportSection/remote-setup
I hope this helps.

Ray Calo
DISH Network

Nov 07, 2010 | DISH Network IR Remote Control

1 Answer

I just programmed my dish #2 remote control to a tv. The remote is not working. I cannot access the guide menu "etc". What do I need to do? This is a second tv and the remote worked just fine before....


It sounds like the remote would need to be programmed to the receiver itself. It may have lost it's programming when the TV code was put in.

To program remote to Satellite:
1. Access System Information screen.
2. Note the # on the bottom where it was Secondary Remote Address.
3. Hold SAT until all buttons on top of the remote light up.
4. Let go and while it's blinking enter a number between 1-15 and press #
5. Press record 3 times and test remote.

Tommy Faust
DISH Network

Sep 25, 2010 | DISH Network IR Remote Control

1 Answer

Programme remote to work with sony tv


To program your DISH Network remote to your Sony TV you will simply- press and hold the TV Mode button until all the other mode button back lights illuminate, then release.

-Now while the TV mode button is blinking please enter in the remote code 500 which is the remote code for your Sony TV after entering 500 then press the pound (#) key.

-After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button.

-The DISH Network remote should now be programmed to control your TV.

-If the remote code 500 doesn't program the DISH Network remote successfully you can also try each of the following using the same procedures, 000, 590, 640, 502, 002, or 567.

I hope this resolved the issue for you! Please feel free to contact us if you need any additional assistance.
-Kirstie DISH Network

Sep 16, 2010 | DISH Network IR Remote Control

1 Answer

My tv remote will not allow me to access the satellite


walk_alan,

Are you still having problems with your DISH Network remote? Which light on the remote lights up when you press the select button? If any button besides the SAT button, the remote is not in SAT MODE. Pressing and releasing the SAT button will put the remote in SAT MODE.

If the remote is in SAT MODE and doesn't operate the receive, then the remote may need to be readdressed to the receiver or the remote may need to be replaced. Do you have fresh batteries in the remote? If so, I have provided steps on readdressing the remote to the receiver.

Remote: All Other Remotes
  1. Go to System Info screen(depending on the receiver, you can press the "System Info" button, or pull the smart card out from the receiver till the "System Info" screen appears on the TV)
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button
  5. Once the SAT button blinks three times, press record. Note: If successful the number selected in step 3 will appear in the System Info screen under Remote Address.
I hope this helps.

Ray Calo
DISH Network - Executive Offices

Jun 20, 2010 | DISH Network 135899 Remote Control

1 Answer

Need code for 32in.olivia tv


Remote manufactures and service providers continuously add support for new TV products. If you have the following Satellite or Cable Systems, try these remote codes for Olevia HDTVs.

Also available is the Olevia Universal Learning Remote RC-LRN that offers component programming of most video hardware including your Cable or Satellite Receivers, VCR's, TiVo’s, DVD, Blu-Ray or even HD- DVD players. The learning remote is available at 866-965-3842
Dish Network Remote Codes 506 or 127

could try Dish Network..Remote Codes 506 or 127
Satellite TV Systems Dish Network Remote Codes 506 or 127
Dish Network Remote Codes 506 or 127

May 23, 2009 | Syntax Olevia 537H Television

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

The Knight
The Knight

Level 3 Expert

72650 Answers

Are you a Teac Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...