Question about Memorex MPH4495 Phone

1 Answer

Memorex MPH4495 change time on display screen

How do I change the time showing on the display screen?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Push the big blue "DIAL" button for 3 seconds, and the hour will blink, change the hour by pressing the up or down keys right by the "DIAL" button. Press the dial button again to move to the minute. You can cycle through the month, day, day of week etc. by pushing the dial button after each setting.

Posted on Feb 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My office has the Prostar 816 phone and the manual is not detailed at all.. I needed to know how to change the time (due to time change) Our manual says #55 etc etc... Help me please!


To change the time on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming2.gif)
2) enter in #55 the screen should say YYMMDDWHHMM
3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.)
press # when finished.

Nov 12, 2009 | Samsung Prostar 824 Keyset Telephone

1 Answer

How to change the time and date on nortel phone


Programming2.gif is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say A. Configuration. The 4 top line/feature keys are now used for programming.
Press "NEXT"(bottom right arrow)
display should read B.General Administration.
Press the show key (top right arrow)
display should read 1.speed dial
Press the next key 2 times(bottom right arrow) .
display should say 3.time and date
Press the show key (top right arrow)
display should show current programmed time
Press the Change key
Enter in time in 12 hour format
press ok
press either Am or PM when prompted
press ok
press the Rls key when finished

Nov 04, 2009 | NorStar T7316E Corded Phone

1 Answer

Would like to be alerted when I place a call on hold that they are still waiting. How do I programm this?


Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the pool on.
Press the next key 6 times (bottom right arrow) .
The display should saySystem Prgrming.
Press the show key (top right arrow)
The display should say Hunt groups
Press the next key 2 times (bottom right arrow) .
The display should say Featr Settings.
Press the show key (top right arrow)
The display should say backgrnd Music
Press the next key 9 times (bottom right arrow) .
The display should say Held Reminder:N Press the Chng soft keyto Y Press the next key (bottom right arrow) The screen should say Remind Delay:60 Press the Chng soft key to change the hold timer to the desired time length.
Press the release key when finished

Oct 15, 2009 | NorStar M7310 Phone

2 Answers

We relocated a M7310 phone and it kept the extension of where it used to be. I need to change it to the extension it's at now and I've tried finding the Set Relocation option but I think our phones are too...


First, move the telephone sets back to where they were.
Next, we'll have to change the system programming2.gif.
Programming2.gif is done on 7310, 7324 and 7316 type sets.
Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the next key 7 times(bottom right arrow).
The display should say system programming.
Press the show key (top right arrow)
The display should say hunt groups
Press the next key 2 times(bottom right arrow) .
The display should say Featr Settings
Press the show key (top right arrow) .
The display say Backgrnd music2.gif.
press the next key 20 times (bottom right arrow)..
The display should say set relocation.
Press the chng key. change from N to Y.
Press the release key when finished

Move sets from their old locations to their new locations

Oct 08, 2009 | NorStar M7310 Corded Phone

1 Answer

Setting the time..


Normal 0 this is how ive changed the time before, note that you dont see the number you type in.


Press FEATURE **8463 – Display shows PASSWORD:
Then type in 23646 (Note this number will not show on display)
The display will show hours.
Press CHANGE (or NEXT if you do not need to change the hour).
Enter the hour (00 to 23). If number is less than 13, the display shows AM.
Press CHANGE to select PM.
Press NEXT. The display shows minutes.
Press CHANGE (or NEXT if you do not need to change the minutes).
Enter the minutes (00 to 59).
Press NEXT. The display shows year.
Press CHANGE (or NEXT if you do not need to change the year).
Enter the last two digits of current year.
Press NEXT. The display shows month.
Press CHANGE (or NEXT if you do not need to change the month).
Enter the month (01 to 12).
Press NEXT. The display shows day.
Press CHANGE.
Enter the day of the month (10 to 31)
Press RLS (release) to exit.

Oct 27, 2008 | NorStar M7310 Corded Phone

1 Answer

Setting date & time on M7310


Normal 0 TIME CHANGE PROCEDURE: DONE FROM THE MAINPHONE
Press FEATURE **8463 – Display shows PASSWORD:
Then type in 23646 (Note this number will not show on display)
The display will shoe hours.
Press CHANGE (or NEXT if you do not need to change the hour).
Enter the hour (00 to 23). If number is less than 13, the display shows AM.
Press CHANGE to select PM.
Press NEXT. The display shows minutes.
Press CHANGE (or NEXT if you do not need to change the minutes).
Enter the minutes (00 to 59).
Press NEXT. The display shows year.
Press CHANGE (or NEXT if you do not need to change the year).
Enter the last two digits of current year.
Press NEXT. The display shows month.
Press CHANGE (or NEXT if you do not need to change the month).
Enter the month (01 to 12).
Press NEXT. The display shows day.
Press CHANGE.
Enter the day of the month (10 to 31)
Press RLS (release) to exit.

let me know how you get on


Sep 15, 2008 | NorStar M7310 Corded Phone

4 Answers

How to change the time on screen


generic for all phones... the standard way to change the time and show it on screen is simply going to the settings and look for time settings... in here, you can actually change the time, the date , and the year and you can also change the time format form 12 hour to 24 hour.

Apr 08, 2008 | Phones

1 Answer

Change the time


Depending on the software of the Norstar it is connected to, you would log in to the key system by using Feature **23646 and then follow it up with the administration password.

If this is a pre 1.0 system, i.e DR5.1 do the following. If not, go to the bottom and click on the link and find the manual for the system your phone is connected to. Generally the system coordinator guide will have what you are looking for.
Setting the date
Begin with the display showing

l.Sys speed dial
1. Press [NEXT] (second key from the top on right for a 7310) twice.
2. The display shows 3.Time and date.
3. Press [SHOW] (first key on the top on the right for a 7310)
The display shows the time, for example, Time 01:00.

- All times and dates must be entered using numerals. For
example, February would be entered as “2”.
- The time may be entered in either 12 or 24-hour format. If the
display is in English, and the hour entered is less than
thirteen, the display prompts you to specify “am” or “pm”.

Press [Show] This will open the time change function. Simple rule. If you want to modify a value, press [CHANGE] and you'll get a cursor. Once you're done with that entry, press [NEXT] to go to the Minutes, press [CHANGE] etc...

I have also included how to change the date below.
Press [Next].
The display shows the date, for example, Date 31 Mar 91.
4. Press CHANGE (softkey under screen). The display shows Year: 88.
5. Set the year.
a. Press CHANGE.
A cursor replaces the number on the display.
b. Enter the year using the dial pad.
For example, press a a to enter the year 1990. ?
c . Press [Next] The display shows the month, for example Month: 01.
6. Set the month.
a. Press [CHANGE]
A cursor replaces the number on the display.
b. Enter the month using the dial pad.
For example, press 02 to enter February.
c . Press [Next].
The display shows the day, for example Dar: 01.
7. Set the date.
a. Press CHANGE
: A cursor replaces the number on the display.
b.” Enter the date using the dial pad.
For example, press 14.

Apr 03, 2008 | NorStar M7324 Telephone

1 Answer

How do I change the date and time on display screen


how do I change the time i've press program and # what is next

Jun 08, 2007 | Sony (ITID80) Phone

Not finding what you are looking for?
Memorex MPH4495 Phone Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Memorex Phones Experts

kakima

Level 3 Expert

96664 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Memorex Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...