Question about HP Officejet 5610 All-In-One InkJet Printer

1 Answer

Cannot reset print cartridge.

I have an HP Officejet 5610 printer and had my cartridges refilled on when I put in the color one, I'm getting an error.....This cartridge is not intended for this printer. It is the exact one I took out.

I have followed the instructions as to how to reset my printer but, am still getting the same error code. Any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 40 Answers

Hello.

This might not be the solution but a good tip.

If there is a contact surface on the cartridge make sure
there is no dirt or fingerprints on the contact surfaces.

Sometimes the simplest thing could be the answer.

Good Luck.

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the K cartridge and i get this caution. I-Unit End Replace K


If "[Color name] Toner Empty. Replace with a new toner cartridge." is displayed and printing stops, replace with a new toner cartridge.
([Color name] indicates one of the following: C or Cyan, M or Magenta, Y or Yellow, K or Black.)

Jan 10, 2017 | The Office Equipment & Supplies

1 Answer

My sharp color copier Mx 3100n is indicating F2-73 after using 88-1 how do I restore it


Hello Tijjani,
The error code that you are experiencing is as follows;
F2 73 IMPROPER TONER CARTRIDGE DETECTION (YELLOW)
You need to replace the yellow cartridge with the proper part # Item Number: MX 31NTYA, MX31NTYA.

Good Luck!
Rich Lilja

Jan 08, 2017 | SHARP MX-3100N

1 Answer

My printer brother dcp7065dn disply 71 and72 error


This is codes for the ink cartridge. The code means there is a problem with the cartridge. Change them both and restart the machine.

Jan 13, 2015 | Office Equipment & Supplies

1 Answer

Why is print quality poor after inserting new ink. Copies are faint and have lines


the cartridge is clogged with ink that has dried and reduced the slit. you need to replace the cartridge with a new one. it happens usually if you recharge the cartridge 3 or 4 times with compatible ink.

May 07, 2014 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

1 Answer

Hello i have problem with old samsung...


considering the cost of new up to date printers I would consider junking it and get something under warranty that there are driver up dates for.

Sep 20, 2013 | Office Equipment & Supplies

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

2 Answers

Samsung kicked out hp 3in 1 printer already installed


Don't have your HP designated as the default printer (if possible)when you hook up the Samsung. When the Samsung is hooked up it sees the HP is the default printer. Well it can't have that, they discard the HP drivers. What does Samsung care about HP drivers theres only one printer port setup and thats the USB port you have them sharing. So yes you need to get a second cable. Tim

Jan 29, 2007 | Samsung SPP-2020 Thermal Photo Printer

Not finding what you are looking for?
HP Officejet 5610 All-In-One InkJet Printer Logo

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98796 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...