Question about RCA M4204 MP3 Player

1 Answer

Cant get mono off tv screen ..

Last night I thought I was turning the tv up but in fact I was changing the channel. Now the screen is blue and says mono in the right upper corner.
I do have cable and should of used the remote, but of course I didn't.
I have tried to put the tv back on channel 3 and even 4 but is still blue and still mono with no picture. can anyone help me.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

The TV set itself will probably have a button that is marked either "Video," "Input" "Source" or "TV/VCR" - I would need to have your exact television model # to be sure. Make sure the cable box is on. Press the Video/Input/Source/TV/VCR etc button and see if your cable picture reappears on one of the source channels. If your television is connected to the cable box with a standard coaxial cable, then Ch.3 or Ch. 4 would be the right choice. If you have a digital cable box, however, the cable is probably going to be on an auxillary channel. If you give me the exact model # of your TV, and the type of wires that run from your cable box to your TV, I can give you more precise instructions. Good luck!

-Tha Mp3 Doctor

Posted on Feb 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 42 inch lcd tv. The tv will come on but the screen is blue Cant change channel or adjust volume. Any help would be greatly appreciated, thank you.


try to unplug it and a cable or sat box if used from power for a while to see if a reboot will help---also the fact you cannot change channel etc means the set experienced some kind of glitch.

Nov 04, 2012 | Sanyo 42 in. LCD TV

1 Answer

Help I only have a blue screen


Try adjusting the settings to factory settings. Change the input to some other device. If problem persists, there is something wrong inside. It is better to show it to a qualified service technician.

Jul 17, 2012 | Dynex DX-L42-10A 42 in. LCD TV

1 Answer

Blue screen need to know how to scan channels to get input to come back up


Will need to know what tv you have, but you are right it is probably your input button. if you pushed it on your remote then there should be an input button on remote. otherwise you will have to go into the tv menu and setup it up there.
if you respond with model and make of tv, might get more info.

Jul 12, 2012 | Polaroid Televison & Video

1 Answer

Discoloration problems


covergence problem, most likely the ic's are bad, call a repair man!

Aug 27, 2009 | Televison & Video

1 Answer

Snowy picture with catv 1 mono on screen


is tv making some.. sound...please tell me..

Oct 20, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Blue screen sony


blue crt shorting use crt restorer to lift short or replace picture tube /crt

Aug 19, 2008 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Double image - not covergence


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 21, 2007 | Toshiba 42H83 42" Rear Projection...

1 Answer

No pic but sound :/


You are having a high voltage problem. Quite possibly in the horizontal deflection. I would check the horizontal output and regulator transistors.

Sep 27, 2007 | Toshiba 40H80 40" Rear Projection...

1 Answer

Mono setting?


What channel is it and when they tune in that channel, is the picture nice and clear or is it grainy and snowy before the screen goes blue? On some sets, if the signal is weak, the picture will go blue. This is called Blue Screen and is there so you do not see very poor, grainy and snowy pictures. Some sets will have an option in the menu to turn the blue screen off.

Aug 27, 2007 | RCA 24F512T 24" TV

1 Answer

TV was Fine last night, this morning there is picture, but no sound


Since the you were vacuuming behind the set before this happened, I'm going to assume that you unplugged an input. Check the wiring, not just on the back of the set, but, on the back of the peripherals (DVD, Satelite, cable box, etc.) If wires are connected, then, take a component, such as a VCR or cable box and hook it up to the RF connector (AKA the cable connector) and run it on channel 3 or 4. If you have sound, then, you have a configuration problem and need to rewire your set. Hope this helps.

Mar 17, 2007 | Philips 27PT5441 27" TV

Not finding what you are looking for?
RCA M4204  MP3 Player Logo

1,276 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

kakima

Level 3 Expert

100311 Answers

The Knight
The Knight

Level 3 Expert

71095 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...