Re: Sony GV-D1000 Powers on, will play memory stik, but...
C:31:23 error code means problem is in Supply Reel section. If you are tech person you might got the point. Unit has mechanical problem in supply reel area and reel pulse is not being generated as supply reel table may be stuck due to back tension. Let me know if you need further help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The C:32 is an indication that there is no movement of a motor. The 72 indicates which one. I don't have the service manual handy, so I don't know which motor is involved. These units are relatively senstitive to alignment and therefore arenot typically DIY repair units. I will locate the service manual and try to post more details later,
Forget USB. Firewire is the best way to link to your Apple computer. Depending on the software your are using you will be able to control your Sony unit from your Apple computer. You could not do that via USB. Also firewire, or in your case i.Link is much faster. Just make sure you have a firewire port on your Apple and the proper software and you should be set. I hope to see your video's on Youtube! : ) Good Luck!
I was having the same problem with a sony GV-D1000 which I don't even use a battery with. I use an AC adapter. Someone suggested that the contacts might be dirty, so I unplugged the small connector that plugs into the back of the deck and wiped it hard with my t-shirt. It seems to work fine now. SO try cleaning the contacts (wherever your adapter or battery connects with the deck or camera.)
this is when the take up reel either stops or when the reel pulses arent been read properly,have you tried a different tape??.It can be caused by tight tape,if this doesnt work is a job for your local sony service center