Question about LG Flatron Ez T710BH 17" CRT Monitor

1 Answer


HEy fella'z i have this weird problem with my monitor...i know it's old and i should get a new one...but i need i still need it since i'm not in position to buy new one yet...

anyway... i've noticed that my blue color is not present or it's very very weak.... so my picture is kinda yellow...and ofcourse bit darker cuz of it...

Now i know there has been some issues with whole series of that monitor.... cuz i've been working in some pc store...and a lot of those monitors broke..same way as mine... and i know that ppl who repaired it said it's something simple...and they just had to burn on (solder) something back ( cuz they didn't do it right at the factory) took em 15 minutes to do it... now i don't wanna waste my money and ask someone to repair it... cuz i can do it alone if it's simple... i just wanna know where to start : S

Sorry for my bad english. :/

Posted by on

  • mario_jekic Feb 11, 2009

    hmmm i'll try to open it and check what's it all about...anyway they were mentioning before that it's some " cold solder " problem and it de-attaches from the board after some time (i'm not sure what and where :S)

    But thanx for the help and your opinion !!! Well appriciated !!

    p.s. that was fast lol ;D



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 237 Answers

Its very possible the the tube that produces the blue color has depleted or burnt out. If that is the case then it would have to be repaired or replaced. Im not so sure that its just a solder issue I think it has more to do with the tube itself.

Posted on Feb 11, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

The image on my monitor (T710B) spreads of in the middle and narrows in the ends.

there should be a button on your screen that will open a menu -- here you should find an option for "Geomentry" or "geom" or something similar (it should have a picture that shows what is happening to your screen. Go into this option and play around with the geometric shape of your display -- you should be able to square off the corners so everything looks right again. You might have to then play with the screen size or position in order to get the display centered again ... but this should not be difficult (the options should be in the same menu as the geometry option.
On my monitor, the menu button is located right next to the brightness and contrast controls ... hopefully you should be able to find the buttons, and navigate the menus without an issue.

Jun 02, 2011 | LG Flatron Ez T710B 17" CRT Monitor

1 Answer

No video output no responce from the on\off button

Resolder entire the video section first where the crt socket is located, look the vertical IC & System control IC for loose pins for solder. Check the ABL for open resistor and fault video ic located at CRT socket.

Sep 30, 2010 | LG Flatron Ez T710B 17" CRT Monitor

1 Answer

Problem on LG Flatron ez T713SH crt monitor

i have the same thing, monitor display is dark and tick tick sound audible and thats all it do untill now..

Feb 15, 2010 | Computers & Internet

2 Answers

Weird colors!

Normally this happens if the plug at the back of of the monitor or the computer loose. Try to secure that cable. If they are secure, check the pins on the ports at back of the monitor / desktop or the cable. I also suggest that you try a different monitor cable.

Jun 17, 2009 | LG 22" FLATRON LCD Monitor

2 Answers

LG Flatron EZ T530S

Check your connector to your computer if that's good check the HOT if it's bad replace the HOT and flyback. Check the SMPS caps.

May 23, 2009 | LG Flatron Ez T910B 19" CRT Monitor

1 Answer

LG FLATRON E700SH is not displaying RED color

there is ovbiously a fault with the monitor and w ould be best if you bought a new up to date monitor then if any faults consist with that one you could just take it back

Dec 06, 2008 | LG Flatron Ez T910BU 19" CRT Monitor

1 Answer

Screen is now a weird color

The problem might be in the cable. Try to reconnect it to your machine. Also try to set your color settings on the monitor itself, so that all the colors are equal.

Sep 26, 2008 | LG Flatron L1750S 17" LCD Monitor

1 Answer

LG Flatron T910BU

what problem monitor not display color

Jan 31, 2007 | LG Flatron Ez T910BU 19" CRT Monitor

Not finding what you are looking for?
LG Flatron Ez T710BH 17" CRT Monitor Logo

474 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Alun Cox

Level 3 Expert

2668 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18410 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides