Question about Enlight 17IN LCD PC SILVER/CHARCOAL W/ 200W INTEL 845GVSRL M/B KYBRD/MOUSE (ENLP771S01845R) Barebone

1 Answer

My motherboard continue restart &tell me steps of solving this pr

Surendra.205@rediffmail.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 535 Answers

Chak the ram or remove the ram & replace the new ram

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A8R-Mx/DP Vintage Motherboard Drivers??


rather doing a driver hunt which can take hours


http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

it might take some time being a freeware driver solution

note: it will find all of your outdated drivers

this is a free driver solutions

this will automatically search for and find the correct driver

you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated


also at cnet

http://download.cnet.com/2000-20_4.html

on the home page you should see a search tab just type in what you are looking for

IE: motherboard name sound drivers

you might have to try a few times to get it right


http://download.cnet.com/drivermax/3000-18513_4-10572602.html

Windows 2000/XP/Vista/7/8 free driver program


http://download.cnet.com/drivers-for-free/3000-18512_4-75548155.html

Windows XP/2003/Vista/Server 2008/7/8 free drivers



http://www.downloadcollection.com/device_doctor.htm

Device Doctor is a freeware Windows application that scans your computer hardware and checks to see if there are new driver updates available for your devices. It also locates drivers for Unidentified Devices in the Windows Device Manager. This tool was designed to be very simple and easy to use


http://www.innovative-sol.com/drivermax/

free program, paid update available



hope this helps

Sep 25, 2012 | ASUS (r) Vintage-PE1 Barebones Desktop PC...

1 Answer

My system has zx i945 lm4 v1.12 mother board 10 or 15 minuts after windows opening it displys vivid verticle green lines then i restart cpu on but no disply in moniter what is the problem?


It looks like your onboard graphics chip has failed. Motherboard replacement is the only way to repair it(Unless you are an electronics engineer.)

Sep 05, 2012 | Barebone Systems

1 Answer

Sound from my Dell PC


click start control panel administration tools computer management device manager scroll to sound video and game controllers you might see a yellow question / exclamation? ! mark or a red X Right click to reinstall drivers


if your computer came with a motherboard disk the drivers could be on it

or you might download slimdrivers


rather doing a driver hunt

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html


note: it will find all of your outdated drivers


this is a free driver solutions

which will automatically search for and find the correct driver

you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue

updating each driver free then restart once all of the drivers have been updated


it might take some time being free
also

http://download.cnet.com/2000-20_4.html

just type in what you want or need be specific you might have to try a few times to get it right
IE: motherboard name sound drivers

hope this helps

Sep 03, 2012 | Dell Dimension XPS D-Series Replacement...

1 Answer

Free qmp 100 im drivers


rather doing a driver hunt which can take hours


http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

it might take some time being a freeware driver solution

note: it will find all of your outdated drivers

this is a free driver solutions
this will automatically search for and find the correct driver
you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated

also at cnet
http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for
IE: motherboard name sound drivers
you might have to try a few times to get it right

hope this helps

Aug 31, 2012 | Abit Barebone Systems

1 Answer

Why does my laptop restart atuomatic when i shut down it?


One bad lead or faulty connection point can cause a computer to shutdown continue restarting on a cycle or fail to detect your hard drive boot up


test all leads that attach to your hard drive including electrical extensions SATA

the leads from your (motherboard to your hard drive) make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty


make sure all leads that are attached to your drives dvd\cd have secure connections and are not faulty


even something as small as an electrical extension or a faulty fan lead can cause you problems computer needs all of the data and power to travel through every working device and to have an end for a computer to be able work properly


a motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive check all electrical extensions make sure they are securely seated even the cd/dvd drives need to have current go through make sure these devices are working


check the CPU make sure it has thermal paste and dust free secure seating


also check your computer ram modules and cmos battery make sure it has charge and they are dust free and securely seated some motherboards cmos batteries are soldered in


hope it helps

Jun 30, 2012 | Dell 14Z-N411Z

1 Answer

I cant overclock my system but i go to bios now whati had to do


The BIOS. Overclocking is best done in the computer's BIOS (Basic Input/Output System or Binary Integrated Operating System). There are also some motherboards that let you do a basic increase in power by setting a jumper, but this is dangerous and you have no real stability control.


There are some software programs available which allow you to overclock inside the operating system, but the best results are achieved by changing BIOS settings. Usually you can get into your BIOS by pressing DEL (some systems may use F2, F10, or Ctrl-Enter) as soon as your computer begins the POST

(Power On Self Test - when it shows the RAM size, processor speed, etc.).


Here, you can change your FSB (front side bus), memory timings, and your CPU multiplier (also referred to as CPU Clock Ratio).

Clearing your CMOS. Sometimes, an overclock can become unstable. If this happens, or your computer will not boot, you will need to reset the BIOS back to default and start over again.


This is done by clearing the CMOS (a small piece of memory on the motherboard which stores your BIOS configuration, and is powered by a small battery). Some newer motherboards will bypass user settings in the CMOS if the computer fails POST (often caused by a faulty overclock). However, most motherboards require a manual clear.


This can be done in two ways, depending on your motherboard. The first way is by changing the position of the clear CMOS jumper on your motherboard, waiting a few minutes, then repositioning the jumper to its original place.


The CMOS Jumper

The second way, if your motherboard doesn't have this jumper, consists of unplugging your computer, removing the little CMOS battery, then pressing the power button (your capacitors will discharge), and waiting a couple of minutes.


Then you have to refit the battery and plug in your computer. Once your CMOS is cleared, all BIOS settings are reset back to default and you'll have to start the overclocking process all over again. Just so you know, this step is only necessary if your overclock becomes unstable.


Locked or Unlocked. The first thing to know when you start the process of overclocking, is whether your processor is multiplier locked or unlocked.

To check whether your CPU is locked, lower your multiplier via the BIOS one step, for example from 11 to 10.5. Save and exit your BIOS and your computer will restart.


If your computer posts again and shows the new CPU speed, it means your CPU is unlocked. However, if your computer failed to post (screen remains black) or no CPU speed change is present, this means your multiplier is locked


Multiplier Unlocked Processors. Usually, your max overclock is limited by your memory, or RAM. A good starting place is to find the top memory bus speed in which your memory can handle while keeping it in sync with the FSB. To check this, lower your CPU multiplier some steps (from 11 to 9, for example) and increase your FSB a few notches (e.g.: 200 MHz to 205 MHz).


After this, save and exit your BIOS. There are a few ways to test for stability.

If you make it into Windows, that is a good start. You can try running a few CPU / RAM intensive programs to stress these components. Some good examples are SiSoft Sandra, Prime95, Orthos, 3DMark 2006 and Folding@Home.


You may also choose to run a program outside of Windows, such as Memtest. Load a copy of Memtest onto a bootable floppy, then insert the disk after you have exited the BIOS.

Continue to increase your FSB until Memtest starts reporting errors. When this happens, you can try to increase the voltage supplied to your memory.


Do note that increasing voltages may shorten the life span of your memory. Also, another option is to loosen the timings on the memory (more on this a bit later). The previous FSB setting before the error will be your max FSB. Your max FSB will fully depend on what memory you have installed. Quality, name-brand memory will work best for overclocking.


Now that you know your max FSB, you'll figure out your max multiplier. Keeping your FSB @ stock, you raise your multiplier one step at a time. Each time you restart, check for system stability. As mentioned above, one good way to do this is by running Prime95.


If it doesn't post (reread the section about clearing the CMOS), or Prime 95 fails, you can try to raise the core voltage a bit. Increasing it may or may not increase stability. On the other hand, the temperature will also be increased. If you are going to increase the core voltage, you should keep an eye on temperatures, at least for a few minutes.


Also note that increasing voltages may shorten the life span of your CPU, not to mention void your warranty. When your computer is no longer stable at a given multiplier setting, lower your multiplier one step and take that as your max multiplier.


Now that you have your max FSB speed and your max multiplier, you can play around and determine the best settings for your system. Do note that having a higher FSB overclock as opposed to a higher multiplier will have a greater impact on overall system performance.


http://www.pcadvisor.co.uk/news/index.cfm?newsid=107977


hope this helps

May 30, 2012 | Barebone Systems

1 Answer

I have AGP8X motherboard, P4, Wiindows XP m/c with 256MB RAM. As speed is too slow, I purchased 1GB RAM. After installating it, PC never starts (says System file missing). But, if i install 1GB a,longwith...


The RAM stick you bought is either incompatible with your motherboard, or it is a lemon from the factory. Did you perhaps buy this RAM off of ebay or other such site? Make sure to buy RAM online from online vendors like newegg.com, tigerdirect.com, zipzoomfly.com and amazon.com. Too many super-cheap parts coming from china being sold on certain sights. Buyer beware. If you can, send the RAM you bought back for a refund.
I'd like to tell you what kind of RAM is supposed to be in your motherboard, but you didn't list the model of the motherboard. AGP 8x is a type of standardized slot for video cards that they put on motherboards. It's not the name of the motherboard itself.

Mar 07, 2011 | Barebone Systems

1 Answer

Same prob


This problem cannot be solved by anyone but a trained technician.

It will liklely requires one of the following repairs

1) new motherboard
2) new CPU
3) New CPU fan
4) new ATX power supply


This is my honest opinion after 100+ PM repairs personally.

best of luck,

Sagacious1

Aug 07, 2009 | Enlight 17IN LCD PC SILVER/CHARCOAL W/...

2 Answers

Intel 845gvsr problem of thermal heating of cpu


To solve the thermal heat problem
1. Apply heat paste pound inbetween the processor and motherboard.
2. Check the MotherBoard cpu pins are correct temper.
3. Check the CPU Fan's RPM in hardware monitoring menu in BIOS mode.
4. If dust is form inside of the fan rotar open the plastic lock and take the Fan out and clean clearly apply the oil slightly in the pully.
5. If This problem is till continue, Change the SMPS and rescet the BIOS setup. Now problem will clear.
6. Problem is till continue check the CPU and and then MotherBoard.
7. This is usefull to you. i think so. any how feadback to 'abdulsoftdrive@gmail.com'
THANKYOU

Mar 04, 2009 | Enlight 17IN LCD PC SILVER/CHARCOAL W/...

Not finding what you are looking for?
Enlight 17IN LCD PC SILVER/CHARCOAL W/ 200W INTEL 845GVSRL M/B KYBRD/MOUSE (ENLP771S01845R) Barebone Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Enlight Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you an Enlight Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...