Question about Toshiba 32HL67 32 in. LCD Television

2 Answers

LCD tv main/digital board

Is there somewhere I can send off the main/digital board to my Toshiba 32HL57 lcd tv and have repaired? That is the problem, I'm told. Flickering, dark and seemingly slow motion picture.

Posted by on

  • mrosenberger Feb 14, 2009

    I wish Toshiba would contact you guys! My TV is under warranty and this part has been backordered for months... My TV has been in for repairs since OCTOBER!

  • danyroycstj Mar 30, 2009

    Same problem here. Sound, but no image. My main board is broken too. I'm gonna give Toshiba a call. My 1-year warranty is over since 6 months...

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Send it to us and we will refurbish the board.....

e-mail me....circuitworld@comcast.net


Posted on Feb 11, 2009

  • Circuit World
    Circuit World Feb 11, 2009

    Good idea :-)

    We have the same boards at competitive prices, but if you wish you can send the circuit too us and I will repair it for less than the cost of purchasing another board, even if you would purchase the board from us.

    And we will match any refurbish board warranty :-)

    Keep this in mind:

    There could be other circuit components in your tv causing this problem inversely. Honestly, your best bet would be too have a professional technician in your area diagnose the root cause. A professional service technician will test for critical waveforms. Circuit waveforms indicate the overall health of your entire tv. There maybe other problems laying dormant as a result of your initial problem. Professional servicing centers will also tune and adjust software values after a repair. This affects the tv's intuitiveness when mixing and processing input signals. Proper signal timing and data sequencing equals optimum performance integrity. As a bonus from professional service, your tv will (or should) be upgraded with the latest media software. This expands your tv's compatibility with media input. Most upgrade software are now "backward compatible" which is good news for first generation media formats being accepted by your tv.

    Which ever way you choose to resolve your tv problem I hope it works out successfully.

    Circuitworld@comcast.net

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,294 Answers

You can check this website to find the part you are looking for. It might be cheaper to replace it instead of repairing. Check the part number from the main/digital board before ordering.
Good Luck.

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My PENDO FHD LED LCD TV turns itself off only after a few minutes of turning on with remote..screen says pendo cant get into any menu


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jan 12, 2017 | Televison & Video

1 Answer

What to do when your Toshiba 55TL515U powers on, works fine for a few hours, then suddenly turns off, and then continues to click as if it is turning on and off again?


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jan 11, 2017 | Toshiba 55TL515U 3D LCD TV

1 Answer

Hi my led tv UE46D500 has no picture only sound.unplug for few hours and the picture comes back.now I have this problem every day sometimes I got the picture and sumtime no picture whole day. Help pls


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board...

Jan 10, 2017 | Samsung UE46D5000 116.8 cm 46" 1080p...

2 Answers

I have a Sony LCD Digital Color TV Model KDL-40S5100


try this --as you are wasting time and will eventually waste money---take it to a repair shop for a proper diagnosis and quote

Jan 08, 2017 | Sony Bravia KDL-40S51009 40 in. TV

2 Answers

Hi what part do I need to fix my tv ?


looks like you have a bad LCD panel or a bad T-Con board. here is a link to a replacement T-Con board but if it is the LCD panel you are out of luck since those can be quite costly.
http://www.shopjimmy.com/lg-philips-6871l-1501c-t-con-board.htm

Jan 08, 2017 | Televison & Video

1 Answer

Have a dark band horizontally across vizio tv. Appears to be a backlight, but not sure how to fix


Could be a bad CCFL lamp, if the set usess CCFL back-light system. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 08, 2017 | Vizio Televison & Video

1 Answer

Toshiba tv model32w2300A how repair? 0nly in the screen say do not put the power off


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jan 07, 2017 | Toshiba Televison & Video

1 Answer

How to fix a scrolling problem


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Oct 09, 2014 | Dynex DX-L32-10A 32" LCD HDTV

Not finding what you are looking for?
Toshiba 32HL67 32 in. LCD Television Logo

959 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71672 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...