Atapicam and cd-rw problem, no cd0 but acd0 some error

Dear My Driver is unnstalled and want to installed the driver and USB Not running on it

can you help me?

Shoaib Khan

I have missed this one ^^, I`ve checked my config today and noticed that I`ve
left that "device cd" commented, because it used to hang my system before
when trying to access the cd-rw drive. I`ve uncommented it and now it works,
I have /dev/cd0, though I still see some errors about /dev/acd0

acd0: FAILURE - MODE_SELECT_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 sks=0x00
0x00 0x0c
acd0: FAILURE - MODE_SELECT_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 sks=0x00
0x00 0x0c
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40
0x00 0x02
acd0: FAILURE - MODE_SELECT_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 sks=0x00
0x00 0x0c
acd0: FAILURE - MODE_SELECT_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00 sks=0x00
0x00 0x0c
acd0: FAILURE - READ_BUFFER ILLEGAL REQUEST asc=0x20 ascq=0x00
acd0: FAILURE - START_STOP ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00
0x04
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40
0x00 0x02
acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40
0x00 0x02

I have successfully burned a cd with k3b and mounted it afterwards, everything
seems to be there. Sorry for the noise.

--
PGP KeyID: 0x3118168B
Keyserver: pgp.mit.edu
Key fingerprint BB50 2983 0714 36DC D02E ??158A E03D 56DA 3118 168B

application_pgp-signature_part
1K

Quoting Tom Evans <
Thanks a lot, Tom. I am running RELENG6 from this morning.
6.2-STABLE FreeBSD 6.2-STABLE #279: Thu Jun 14 07:50:36 CDT 2007

I've had some really weird problems with RELENG_6 since the end of
May. My kernel from May 21 has fewer problems. Actually my CURRENT
machines are giving me no grief and I'm considering upgrading this one
to current.

Thanks again,

ed

mailing list
#
To unsubscribe, send any mail to ""

Hey ed

Those errors look different to what was described (I only get one such
error in my dmesg), and different to what the OP reported (he didnt get
a cd0).

I don't run STABLE, just CURRENT, so I don't know what to suggest. There
was a lot of talk about problems burning in k3b on freebsd-stable@ a few
months ago, I suggest searching the archives for k3b and see what the
resolution was to that.

If you haven't already (and don't have a good reason to not), I'd ensure
your kernel + userland are up to date, perhaps track RELENG_6 rather
than RELENG_6_[12] and see if that helps.

Tom

signature.asc
1K

Quoting Tom Evans <
Hi Tom,

I am getting a very similar error with my sony cdrom:

Jun 14 07:12:36 HOME kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST
asc=0x24 ascq=0x00
Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): error 22
Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: pass0 at ata1 bus 0 target 1 lun 0
Jun 14 07:12:36 HOME kernel: pass0: <SONY CD-RW CRX230ED 4YS1 Removable CD-ROM SCSI-0 device
Jun 14 07:12:36 HOME kernel: pass0: 33.000MB/s transfers
Jun 14 07:12:36 HOME kernel: GEOM: new disk cd0
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: cd0 at ata1 bus 0 target 1 lun 0
Jun 14 07:12:36 HOME kernel: cd0: <SONY CD-RW CRX230ED 4YS1 Removable CD-ROM SCSI-0 device
Jun 14 07:12:36 HOME kernel: cd0: 33.000MB/s transfers
Jun 14 07:12:36 HOME kernel: cd0: Attempt to query device size failed:
NOT READY, Medium not present
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6
Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error

There was a good cd in the burner when booting.

the unfortunate part is that in this case, it doesn't seem to be
benign because I can't mount any cd nor can I use burncd or k3b.

Any suggestions appreciated. IIRC, I can use burncd if I remove scsi support.

Thanks,

ed


mailing list
#
To unsubscribe, send any mail to ""

The error message is benign - the controller tries to send a command to
the device, the device doesn't support it, so you get the error message.
That's all, everything else should work.

Do you load or compile into your kernel
device scbus
device cd
device atapicam

atapicam allows you to access ATAPI devices through the SCSI subsystem,
so you must ensure that you have a SCSI subsystem to access them
through.

Cheers

Tom

signature.asc
1K

BEGIN PGP SIGNED MESSAGE
Hash: SHA512

Momchil Ivanov said the following on 13.06.2007 21:34:

Hi.
Yes, this is a not new problem. That was discussed.
Try find it in this or question maillists or in PRs.

Good luck.

- --
Regards,
Bogdan
-
KeyID: 0x84B8D5142569D30B
Fingerprint: 78FC 5C40 07CC D331 148E CC79 84B8 D514 2569 D30B
Keyserver: keyserver.pgp.com
-
BEGIN PGP SIGNATURE
Version: GnuPG v2.0.3 (FreeBSD)
Comment: Using GnuPG with Mozilla - #

iD8DBQFGcQeXhLjVFCVp0wsRCnrSAJ4pTHeR+5URkFgiE4BnIYgHLqd6AwCfTydM
WvXeUeOe1W4trQZmBn3KQQM=
=CHAm
END PGP SIGNATURE

mailing list
#
To unsubscribe, send any mail to ""