Question about Ventamatic Gable Mount Power Attic Ventilator Fan

Open Question

Lexsor safe i got a lesxor safe about three years ago. when i got i asked my wife to make up our own password so i made up one half (which only i knew) and she made up the other(which only she knew). the problem is dat i forgot my first half and she forgot her half as it's been a while since we last opened it. i don't know wht model it is as i don't have a manual anymore buy it says electronic digital safe on it. i was wondering if there is another way to open the safe as there are very important stuff in it which we need now. could you please help me? thank you very much. Aleksandro Araujo

Posted by on

2 Suggested Answers

SOURCE: New Lexsor safe LXo24 Model

Hi there, I had the same problem yesterday but luckily remembered the code and got the safe open. The factory pin is 159B.
Regards Norma

Posted on May 29, 2008

  • 42 Answers

SOURCE: query on electronic safe

Someone mentioned they were looking for a combination code to open a diigital safe....

As for a code to open your safe -- there is a factory setting, but if the combination has been changed then the factory setting won't help you much.

Now there is a reset code that the manufacturer can give you. It will reset the combination to the factory combination, however the manufacturer will probably not give you this code 'cause they don't know who you are. You will need the safe serial number for this.

They will give it to a bonded locksmith however.

The other 'secret' code that I am sure is buried in all electronic locks is the CIA/FBI/Homeland Security/police department back door code, but I'm certain that the manufacturer can't even acknowledge that there is such a code, much less give it to you.

If you are serious about a secure safe, a dial lock can only be opened (without damage) by the combination that is set for that lock. A manipulation-proof lock is nigh unto impossible to pick.

good luck

Posted on May 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Remove light governor


I installed my Hunter Ceiling Fan a little over a year ago. A few nights ago my wife told me the lights in the ceiling fan blinked a few times when she turned it on. Over the next few day the problem got much worse. When I turned on the light switch, the lights would not turn on. After a few minutes the lights would begin to flash, like a strobe light. This flashing would last for about a minute.
This morning I removed the light kit. I noticed the watt regulator, part 98480-02. I connected the wires directly that were wired through the regulator. So far, the light now works fine!

Jun 11, 2014 | Hunter Ceiling Fan Light Switch Control

1 Answer

I purchased the hunter outdoor fan about 3 years ago. All three of them are leaking oil. What is the problem?


Might be overfilled on oil. Oil should be only 1/2 " from the top of the reservoir. also check that the reservoir tank is on tight. Note (Left land treads).

Jun 26, 2010 | Hunter 23852 Classic Original Ceiling Fan

1 Answer

I have a safe but cannot find what model it is


Not all locksmiths specialize in safes, but if you can find one, it will take this person since he does this stuff all day and is probably familiar with your unit. You'll need to shop around the locksmith community for a referral. . Sorry I can't be of more help.

Nov 25, 2009 | Ventamatic Gable Mount Power Attic...

1 Answer

Hampton Bay Kemper running Half Speed & Half As Bright


My hampton bay fan began running at full speed on all three fan positions a few weeks ago. I replaced the switch, which did not work. I noticed that the small black box (capacitor) inside the recess behind the light cover has a large bulge that has cracked the plastic. The part number (C61 E185116) does not reveal any websites that can offer a replacement, and hamtonbay.com redirects to homedepot.com. This fan is apparently made by home depot, and it is not backed in the same manner as Hunter fans are (I received a free replacement part for a Hunter about five years after purchase). From this experience and what I have read in this forum, I have learned to avoid the hampton bay fans. It is too difficult to find a part when there is no real manufacturer to contact for assistance.

Jul 24, 2009 | Hampton Bay AC414-LRU 52'' Kemper...

1 Answer

Lasko 3723 burnt motor


sorry but you need to purchase a new fan.
some times the motor is not aline correctly and the rotor "part that spins the blade" rubs on the stator "the part with the copper wire:" the motor
over heat with the friction, then smoke followed by the coil burning.

Jun 14, 2009 | Lasko 3723 Floor / Box Fan

1 Answer

New Lexsor safe LXo24 Model


Hi there, I had the same problem yesterday but luckily remembered the code and got the safe open. The factory pin is 159B.
Regards Norma

May 27, 2008 | Ventamatic Gable Mount Power Attic...

3 Answers

Query on electronic safe


go to the electronic shop and ask for assistance.

May 12, 2008 | Dryers

Not finding what you are looking for?
Ventamatic Gable Mount Power Attic Ventilator Fan Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ventamatic Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

63483 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Ventamatic Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...