Question about Mitsubishi WD-62525 62" Rear Projection HDTV

1 Answer

New 60 in mitsu set up will not take

When attempting setup it goes to setup, language,then skips channel guide and goes to clock

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 184 Answers

Make sure you're TV is set to either the main RF input or the AUX or 2nd RF input. If you are trying to auto program the TV in any of the video modes, input1,2,3 or component1,2, HDMI, etc. you cannot access this function.


michtech

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual


use the cursor program button after reaching eleven and cursor or press up and u will go to the upper numbers or check the 11-1 and 13-1 u may have marked the range as SKIP just deactivate skip on the menu settings and u will be able to enter them

Jul 13, 2013 | Pioneer PRO-200 60" Rear Projection...

2 Answers

My clock has been set manually. Yet, it has twice set itself back one hour twice in the course of last week. Meanwhile, I have the timer set for a 4-day recording. I do I set the timer off so I can re-set...


http://www2.panasonic.com/consumer-electronics/support/FAQs/details-DMR-EA38+-+How+to+set+the+clock-UCM_PRD_CNT_007620

use this link...i think u have to adjust gmt

Oct 27, 2008 | Projection Televisions

2 Answers

I have remote control no. RM-C754. I can always get Ch. 34, except for last eve. When I push the Menu button, it is all in Spanish. How do I get it changed to English, and then how can I get Ch. 34?


On Menu Look for Lanuage change it to English and then Look for Auto program for channels reprogram so it will lock on channels that it can pick up

Feb 15, 2010 | JVC Projection Televisions

1 Answer

No remote, front buttons don't work... how to change channels??


Hold down the MENU button on the control panel for more than 8 seconds to unlock buttons.
Lone99star

Jun 05, 2009 | Mitsubishi VS-6043 60" Rear Projection...

1 Answer

Sony 60in Grand Wega Channel Guide comes up/Screen goes Blank


u may have a bad cable box ( drectv) try a dvd player on the tv if it work fine that means u have a bad cable box ( drectv)

May 08, 2009 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

Panasonic dmr-eh50 Clock setting greyed out - unable to reset clock after clocks went back.


To resolve this issue follow the steps below:

(1) Remove all discs from the unit.
(2) Set the unit to DVD Mode
(3) From the front panel of the unit, open the middle door to display the up and down channel buttons
(4) Press and hold both the up and down channel buttons until the unit displays "BYE" and then flashes "12:00 A"
(5) Release the up and down channel buttons
(6) This will clear the unit and you will be prompted to reset the TV Guide Settings
(7) Setup your TV Guide according to the on screen display
(8) From your remote select "SETUP"
(9) Scroll down to "Setup", right arrow to the options on the right, and down arrow to "Clock Settings"
(10) Select "Set Clock Manually" if your TV Guide Function is not providing you with the proper time

Good luck!!!

Oct 26, 2008 | Projection Televisions

1 Answer

The one for all remote control model urc-7562 funtion on the menu doesnt work what could be the problem?


Hello Stephendo394:
Here are some advanced codes that were found on Remote Central.com web site.
003 Menu
004 Timer Recording
010 Timer Recording
024 Shutdown
026 Shutdown
036 Skip 30 sec
039 Next Page in Menu/Next Track in Play mode
041 Previous Page in Menu/Previous Track in Play mode
043 Time Slip
053 Record
055 Play
061 Right
065 AV
070 NTSC/PAL
076 Language Right
080 Language Left
084 Source
091 Source = SD
100 Playlist View
101 AV
105 Tape Speed
106 Advanced
116 5
117 1
118 7
119 3
120 6
121 2
122 8
123 4
124 Setup
127 Picture Info
140 ?
146 Record
148 Channel Down
152 Channel Up
162 HDD Management
164 Delete
178 Record Flexi-Mode
179 Source = DVD
180 Rewind
181 Returns to Menu
182 Pause/Play
183 Rewind
184 Forward
185 DVD In/Out
187 Forward
189 Context Menu
191 Enter
192 Up
193 Return
194 Left
197 Guide
198 Info
215 ?
219 ?
229 Create Chapter
230 ?
234 Display
245 9
249 0

Aug 20, 2008 | Projection Televisions

1 Answer

RCA TV won't change channels


Your set uses the 195 series chassis and you have something set wrong in your guide plus. Go into the TV's menu and do a complete set-up. Take the remote and press MENU, then "8" to enter setup, then press "1" for "begin setup now" and then press "1" for English, and so on. You must enter "set up guide plus+", then press OK on the remote to choose "setup", select "USA", enter your zip code, and then if you choose "yes" for "do you have cable?" you MUST then choose "no" for "do you have a cable box" If you choose "yes" for that choice, your tuner will lock on one channel no matter what channel you try entering. After choosing "no" for "do you have a cable box", choose "no" for "do you have a VCR?", exit the guide plus menu and then skip the rest of the steps by pressing "2", and then exit the main menu by pressing "0". Your channels will then work normally.

Aug 29, 2007 | RCA P52937 52" Rear Projection Television

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...