Question about GE Lands Phones
Not blinking n i don't have voicemails it's just steady blue how can i fixs this
You guys had the owner manual scanned on your web site so I just RTFM ;~).
To clear the voicemail light on the base unit, first press the Redial button on the phone, then hold down the Clear button on the phone for a few seconds. The light should go out.
Here's a tip: I wrote down the above instructions on a small piece of paper and taped them to the back of the phone. You could also tape the note on the inside the battery door.
Posted on Nov 25, 2008
From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the TONE PULSE sub-menu.
2. Press mute/program button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is “1 TONE”.
3. Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter 1 TONE or 2 PULSE.
4. Press the mute/program button to confirm. You will hear a confirmation tone and your selection shows in the display.
Posted on Feb 09, 2009
You can download the manual for this phone from GE here. It explains (page 30) that the light remains on when the phone is charging or the line is in use, and flashes when you have an incoming call or waiting voicemail if you have that feature on your phone line. Your phone is working properly.
(This was supposed to be a solution. I clicked the wrong place.)
Posted on Mar 26, 2010
Tips for a great answer:
Feb 22, 2013 | GE 25942GE2 Cordless Phone System
Jul 25, 2012 | General Electric 28811FE2 Twin Cordless...
Jan 10, 2011 | GE 28111 Cordless Phone
Jan 10, 2011 | Uniden DECT 6.0 Cordless Telephone...
Mar 26, 2010 | Uniden Cordless Phone
Jan 22, 2009 | General Electric 28811FE2 Twin Cordless...
Mar 06, 2008 | Uniden Cordless Phone
67 people viewed this question
Usually answered in minutes!