Question about Panasonic DMRES15 DVD Recorder

2 Answers

Panasonic Dmr es35v VCR/dvd recorder 'Set 1' problem

Hi there

I am having a problem with my vcr/dvd recorder. The remote isn't working the way its suppose to and when every I press any button on the remote the display keeps showing 'Set 1'. Now I think this means that I have to reset the remote to the VCRs connection but I'm unsure. I have tried powering the whole thing down...Okay power failure did that but I'm still going to take the credit lol, I've tried to reformat another disk but with the remote not working it makes it almost impossible to do. I have lost the manual to the device in question.

I hope someone out there can help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My remote is not working. When I press a button, I get the following message on my unit: U12, U30, SET #, CHK REMOTE #, or RC #. What can I do to fix this? The message displayed means that the remote control and unit are not communicating and the remote needs to be programmed. To program the remote, press and hold the same number that is displaying on the unit and the [ENTER] or [OK] button for more than 2 seconds. For example, if the unit displays “SET 2”, press and hold [2] and [ENTER] or [OK] for more than 2 seconds.

Posted on Feb 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 236 Answers

Panasonic (as many other) remotes can be programmed to control two of more machines by that manufacturer (eg. DVD.player or DVD-recorder). Yours is set to the wrong one, Dig up the instruction manual and try to change the setting to "Set 2". And be sure to select DVD on the remote when you´re controlling the DVD part.

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dmr-es35v can't read any kind of dvd. what can be wrong?


Laser pickup unit fault. Check and replace it. Contact any service technician. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Feb 18, 2017 | Panasonic DMR-ES35V Multisystem Code free...

1 Answer

Have philips univerasal remote need codes for my panasonic dmr-ez28 dvd recorder


Panasonic DMR-ES30VS DVD Recorder/VCR Universal ...

www.fixya.com > ... > Panasonic DMR-ES30VS DVD Recorder/VCR
Panasonic DMR-ES30VS DVD Recorder/VCR, universal remote related issues. Getfree help ... My remote does not work anymore. what is the code for a universal remote? Thanks in ... Question about Philips DVD & Blu-Ray Players ... How do I getremote code for GE universal remote control Need remote code? How to ...

Philips Magnavox MWR20V6 DVD Recorder/VCR Remote ...

www.fixya.com > ... > Philips Magnavox MWR20V6 DVD Recorder/VCR

Dec 20, 2015 | Panasonic Televison & Video

1 Answer

U99 error code on dmr-es35v panasonic recorder what is this?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Error code details to many popular devices are given.

Feb 12, 2015 | Panasonic DMR-ES35V Multisystem Code free...

1 Answer

Panasonic DMR-EZ47V DVD Recorder / VCR Combo RC1 errior message how do I fix this problem


http://www2.panasonic.com/consumer-electronics/support/Video/DVD-Recorders-Players/DVD-Recorders/model.DMR-EZ47VK
http://www.retrevo.com/support/Panasonic-DMR-EZ47-DVD-Players-manual/id/2811ag420/t/2/
To get into Service Mode, first put the machine in STANDBY mode, then press the buttons ChUp OPEN/CLOSE and REC all at the same time on the front panel (Ch Up is hidden inside the AV3 input flap). Eventually the front panel display will show "SERV" (after its "HELLO" messages). Anyway, pressing [6] then [5] on the Remote Control tells me that I have an Error Code of "04" which is a Digital PCB or Communication Error (whereas an Error code of "02" means a "Defect of RAM drive"). (To exit from Service Mode, press [0] then [0] which should get you back to "SERV" and then POWER-OFF the machine).

Hopefully, your manual will display your error codes.

Perhaps the remote control is not set to the same control code as your DMR-ES40V. Codes may be set to 1, 2, or 3 on the remote by holding down the enter button and one of those number buttons for several seconds at the same time. The factory default is code 1. Try 1 first. If that doesn't work try 2. If that doesn't work try 3. If one of those codes doesn't work you may have a bad remote or a bad sensor on your machine. On DMR-ES35V models the sensor is located just to the right of center behind the black window

Jun 23, 2010 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Panasonic dmr-es35v dvd/vcr recorder reads hello, then u61, then


Plug AC power cord to wall electric socket if it is plugged into a surge protector or extension, if not try a different socket, if issue still exist have unit service.

Sep 20, 2009 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Panasonic DMR-ES45V - DVD recorder / VCR combo Remote not workin


My remote is not working. When I press a button, I get the following message on my unit: U12, U30, SET #, CHK REMOTE #, or RC #. What can I do to fix this? The message displayed means that the remote control and unit are not communicating and the remote needs to be programmed. To program the remote, press and hold the same number that is displaying on the unit and the [ENTER] or [OK] button for more than 2 seconds. For example, if the unit displays “SET 2”, press and hold [2] and [ENTER] or [OK] for more than 2 seconds.

Jun 04, 2009 | Panasonic DMR-ES46VS DVD Recorder/VCR

1 Answer

I have a panasonic DMR-ES46V vcr/dvd HDMI i lost the instruction manuel and need to reset the remote to work agin i dont have the codes to do so all the display says is set 1 and the remote dosnt work


1) Hold The Enter Button Down On The Remote
2) Press And Hold The Numeric Button "1" For About 3-4 Seconds
3) Your Remote Is Now Reset To The Remote Control Code #1 (Default Setting)

Apr 27, 2009 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

WHEN I TRY TO USE MY REMOTE CONTROL ON MY PANASONIC VCR/DVD COMBO MODEL #DMR ES35V, THE DISPLAY SHOWS U30 1 AND WON'T WORK THE VCR/DVD. CAN YOU HELP ME?


I called tech support and their answer was simple!

Error Code U30 1.......the fix, press and hold the number one (1) on your remote and at the same time press and hold the ENTER button for 10 seconds while pointing the remote at the units sensor.

Automatically, my unit returned to normal and all my buttons on my remote returned to operational mode!

So, it was confirmed by Vincent at Panasonics tech support, that error codes U30's are rare, but it's a system safety feature. If you were to come across an error U30 2, you would push and hold the number 2 while pressing and holding down the ENTER button....so on and so forth.

I hope this helps someone else out there!
Shelley

Oct 11, 2008 | Panasonic DMR-ES35VS

2 Answers

Dvd/vcr combo Panasonic dmr-es35vs


I also encountered a similar problem and did some research on the internet. The way to fix this problem is hold the 'Enter' key and while holding the enter key, press number 1 for a few seconds until the display changes to C1 or SET 1 error goes away.

This should fix the problem. Atleast it worked for me. All the best!!

Sep 24, 2008 | Panasonic DMR-ES35VS

1 Answer

Panasonic DMR-ES35V


I have a dmr-ez25eb DVD recorder and it has stopped Recording and playing back , the screen on the TV says that its a none recordable disc but I have been useing them from the time I purchased the DVD

Aug 31, 2008 | Panasonic DMR-ES10 DVD Recorder

Not finding what you are looking for?
Panasonic DMRES15 DVD Recorder Logo

1,533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...