Question about Zoom (5590-00-03) Wireless Router (G66115)

1 Answer

I get page can not be displayed 10.0.0.2

I keep getting page can not be displayed when I am trying to get to the zoom configuration manager at 10.0.0.2

Posted by on

  • lucaspj2 Feb 10, 2009

    Thanks, but I don't get to the page to put in the password. The address is what I have in the manual and what I get after I install the zoom x3 from the cd. It's been awhile since we installed it the first time.



    Here's the exact error:





    Internet Explorer cannot display the webpage






    Most likely causes:


    • You are not connected to the Internet.
    • The website is encountering problems.
    • There might be a typing error in the address.

  • lucaspj2 Feb 11, 2009

    Thanks - Yes our router is older. I tried the new IP address and it worked to get me to a password, but the id and password I have did not work. Thanks for the help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

When you put in http://10.0.0.2 you should be able to put in a password. once you put in the password you should be allowed into the webpage. and are you sure that is the correct IP Address

Posted on Feb 10, 2009

  • 1 more comment 
  • ADMTigersqbP Feb 10, 2009

    it may depend on how old the program is. it may be outdated and the webpage may not be available anymore. how old is the router

  • ADMTigersqbP Feb 10, 2009

    put this IP address in on your web brower. http://192.168.1.1 and then try to put in a password and then try to connect. this has a good chance of working for you.

  • ADMTigersqbP Feb 11, 2009

    one more time try going to the IP address i gave you but do not put in the id just put in the password and try to get in. this is all i can think of for your router since it is older.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can the management IP address of an ONT be configured?


ONT management IP addresses are classified as LAN-side management IP addresses and WAN-side IP addresses.
· The LAN-side management IP address can be configured. To do so, choose LAN > LAN Host Configuration from the main menu on the web page.
· The WAN-side management IP address is based on WAN port configurations.
§ If the WAN port statically obtains an IP address, the WAN-side management IP address can be configured. Ensure that the configured management IP address can communicate with the upper-layer device.
§ If the WAN port obtains an IP address in DHCP or PPPoE mode, the WAN-side management IP address can only be obtained from the DHCP server.

May 16, 2016 | Computers & Internet

1 Answer

When I type in the IP address 192.168.2.1 and hit enter it just 'thinks' for around 2 mins then i get the IE cannot display page message up...Is there a reason why i cant get onto my routers page...


First off, make sure the management IP is indeed 192.168.2.1
to do that start > run > cmd > type "ipconfig" and press enter, the Default Gateway's IP address is the router's IP address.
second step, ping it. you should get a replay back
lastly, if you still cannot open the management page, the issue is probably with your browser, one common reason is a configured proxy server on the browser, remove it.
for Internet Explorer: Tools > Internet options > "connections" tab > press "LAN Settings" > uncheck all three checkboxes there.

I Hope this helps

Jun 11, 2011 | Belkin (F5D72304F5D7000) Router

1 Answer

WRT120N---I keep having to disconnect my linksys, unplug all 3 wires on the back of the router, wait 30 sec...reconnect the router...try to get online...when it works then reconnect the linksys....what am...


Please disconnect and internet link and try to access the the Linsys WRT100 management page and see the logs why the router is loosing the connection. If you dont get anything then it might be some issue on the device. A reset may solve your issue.

Please be aware the if u reset the wireless Router you will loose all your configuration and you have to reconfigure the wireless Router.

Please press the tiny black button at the back/beneath of the wireless Router and keep pressing for 2 minutes. The sys light will start blinking slowly and then rapidly. then release the button and wait for 2 minutes for the device to boot up with factory default settings.

Once you are done you can connect to 192.168.1.1 ip address and it will open the your Linksys Router management web page where you can reconfigure your wireless router again.

Hope this will fix the issue.

Best Regards

Jan 01, 2011 | Linksys RangePlus WRT100 Wireless Router

1 Answer

How do i open the config manager


Try this:
To access the Zoom Configuration Manager (web-based configuration utility) on the Zoom DSL modem:
  1. Close any open programs including antivirus and pop-up blockers.
  2. Open a web browser, and in its address bar, type http://10.0.0.2 (or http://192.168.0.1 for Zoom ADSL X6v users) and then press Enter (or Return).
  3. In the Enter Network Password dialog box, type the following username and password in lowercase then click OK. (Note: The modem User Name and Password you enter here are NOT the same as the User Name and Password that your Internet service provider may have given you.)
    • User Name: admin
    • Password: zoomadsl (where "l" is a lowercase letter L)
If you are not prompted for a User Name and Password, click here for more information.

Nov 02, 2010 | Zoom X6 Adsl Wireless Gateway Rohs Router

1 Answer

Can't access Config Manager for Router - Zoom x6 5590


- Reset the router (10 seconds)

Access the configuration page (10.0.0.2)

or

Try to assign a static IP address to the computer (IP 10.0.0.52 Automated SubnetMask, Default gateway 10.0.0.2)

Access the configuration page (10.0.0.2)

(Note: Make sure that your computer is physically connected to the LAN ports of the router and your modem is connected to the WAN or Internet port.)

Mar 08, 2009 | Zoom X6 Adsl Wireless Gateway Rohs Router

1 Answer

Zoom ap4 router


Unfortunately you need to be followed step by step in configuring your router, this can only be done properly by phone or with a chat service.
I think you did not saved the router settings before restarting the router. Go back to the router panel and type again the 2 DNS IPs provided and find the save all settings option on router before restarting.
If you cannot fix the problem in this way you can get support from Zoom at
US : (561) 2417170
UK : 08707200090

May 02, 2008 | Computers & Internet

2 Answers

Zoom x6 model 5590 wireless router


Make sure the Connection Type is set to Static IP on the setup page of the router

Mar 10, 2008 | Zoom X6 Adsl Wireless Gateway Rohs Router

2 Answers

How to use 1800 HG on a non BT IP


i got all green lights on my route and was working a week ago but for some reason it has stop work. please help

Jan 27, 2008 | 2wire 1800HG Router (RG1800HG00)

6 Answers

Zoom X6 wireless router


Hi, With or without the firmware update, the wireless should work and be indicated with the WLAN led. Have you done an update? Have you tried a hard reset? Most routers would require a reset to default after a firmware update. Pls be reminded that when you do a hard reset, all configuration would be lost, better log them down or do a backup. Alternately, you can check your router's web based configuration manager, apparently, there is an enable/disable feature/selection for the WLAN. Verify that is set to enable. Hope this be of help/idea. Post back how things turned out or should you need additional information. Good luck and kind regards.

Oct 02, 2007 | Zoom (5590-00-03) Wireless Router (G66115)

Not finding what you are looking for?
Zoom (5590-00-03) Wireless Router (G66115) Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zoom Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

micky dee

Level 3 Expert

2635 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Zoom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...