- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://www.whirlpool.com/...error-code...w... Whirlpool Home AppliancesCheck the following answers for error-code related issues you can correct: ... Duet SportTMwasher - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33.
The F11 code means that the CCU (central control board) and MCU (motor control board) aren't communicating properly. This can be caused by poor contacts between the wires in the wiring harness and one of the boards. Someone reported a simple fix of carefully adding solder to thicken the contact area on the board where the wiring harness plugs onto the board.
First unplug the washer. You need to check the wiring for any broken conductors. Try wiggling the wiring harness on both sides to see if that helps the connection stabilize. If wiggling works, then the solder solution may work. Warning: make sure to keep the new layer of solder directly on top of the previous contacts. If the solder spreads sideways, you can short the unit. Otherwise, the solution is to replace the CCU. If that doesn't solve the error, Whirlpool recommends replacing the MCU.
If you add the model number for your washer, I may be able to point you to the parts list. I hope this helps.
The F11 error code means that there is a communication error between the CCU (central control unit) and the MCU (Motor Control Unit) and it is not sending the message correctly. Check the wire harness connectors to the MCU and the CCU. Check the drive system for any worn or failed components. Check the MCU and the CCU and the motor. You may need a qualified repair technician for this one.
these error codes are not specific FDL can mean door latch failure .it
can also mean the ccu board has failed also F11 can mean mean anything
from motor to motor control board to ccu board to wiring harness
connecting ccu to mcu to motor. if you do not know how to diagnose with
out error code you may end up buying wrong part. sometimes doorlatch is
not problem central control board CCU is
Well du is a door lock error but it can also mean an error with communication to the main control board or ccu. f11 is also a communication error in either the ccu or the mcu ( motor control board)......easiest thing to try is to unplug all your connections to the ccu and plug them back in and try it again.....sometimes a wire harness just may be loose....if that dosent work I would look at replacing the ccu ( central control unit )
F11 means that the motherboard is not talking to the computer that contols the drive motor Fdl is a door lock failure code - i had this exact issue with several and the motherboard resolved it, unfortunately it retails at $324.99