Question about Soltek SL-75FRN2-L Motherboard

1 Answer

Problem installing the 3 ram

I have a SOLTEK board type SL-75FRN2-L on which a have tried to mount a third ram, so far without succes, problem is that every time i insert the ram, regardless which slot, the PC refuse to start, it boot up, detect my HD and then stop, a few time it have reached the startscreen for Windows. At present I'm running with 2 ram, each 512 MB DDR PC3200 and would like to improve the performance just a little bit, the third ram is of course also same type hovewer not same brand.
I can supply more info i needed.
Hope my writting is understandable (I'm a Danish guy).

Kjeld Nielsen

Posted by on

  • 2 more comments 
  • icepirat Feb 10, 2009

    Thanks to Nic61 for reply.

    I have been checking the manual and my MoBo support all above.

    Then I found an interesting articel and test of my MoBo on - according to this test the MoBo are extremely sensitive to ram, only ram from SAMSUNG seems to work (see below)

    For the Soltek board SL-75FRN2-L, only Samsung RAM modules worked flawlessly. All other pairs of RAM from Kingston (using Winbond BH5, CH5 chips), TwinMOS (also with Winbond BH5 chips), Kingmax and Corsair failed our stability tests. Certain system-level benchmarks worked fine but when it came to stressing the memory and AGP bus, such as in 3D Mark 2001SE, the board simply dropped out of the test loop pretty quickly. This pair of Samsung RAM modules may have been the ticket to operability on our Soltek test sample, but some other nForce2 Ultra 400 motherboards we had in possession did not take to the Samsung RAM well. These are our findings from sample boards sent to us, but it seems that the retail motherboards too face this problem but not to the extent as we were affected. Still, the problem exists and great caution should be taken with your retailer to allow you to swap with completely different memory modules should you find your board not functioning stable.

    Only solution for me seems to be if I could find 2 pcs. ram, each 1GB as the MoBo works fine as long I only use 2 of the DIM. Finding these might be a problem but I will try.



  • ikkenom May 11, 2010

    SOLTEK has gone bankrupt.

    Their web-site is "down".

    So, there is *NO* "support" available from SOLTEK.

  • Nicolas
    Nicolas May 11, 2010


    I wish you all luck in your search!


  • Nicolas
    Nicolas May 11, 2010

  • 3 x 184-pin DDR SDRAM DIMM
  • Supports DDR 200/266/333/400 DIMM Module
  • Supports 2.5V DDR SDRAM
  • Supports a maximum of 3GB of memory with 1GB DIMM
  • Dual DDR Memory Architecture

  • Thats what your mobo takes, check your sticks again and make sure they are supported as it says above. Otherwise it ont work.




1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Boot from 1 RAM at a time to see it theres a defective one...

Posted on Aug 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where can i download driver for sl-75frn2-l motherboard?

Try :

or :

rate please !

Jan 17, 2010 | Soltek SL-75FRN2-L Motherboard

1 Answer

Vi have only 500 ram. Vi would like to buy maybe 2000 ram. Which type should we buy. The mother card seems to have 3 slotts and only one is taken. Our mother card is several years old.

If you follow this link

Your ram is DDR3 and supports up to 400 Mhz speed

Dec 03, 2009 | Soltek SL-75FRN2-L Motherboard

3 Answers


I found the manual on I found drivers on: Good Luck!

Feb 25, 2008 | Soltek SL-75FRN2-RL Motherboard

2 Answers

Two long beeps and no booting. Motherboard Soltek SL-75FRN2-L. The computer has worked with this motherboard for about 3 years. The problem started like that: first problems with the hard disk with the...

You could try re-seating your ram and your video card if applicable.
2 beeps generally upon post depending on the bios is video or unstable ram.
Depending on how many sticks you have on the board try re-seating them if that doesn't work diagnose the faulty stick by putting them in 1 at a time.
Hope this helps

Jan 19, 2008 | Soltek SL-75FRN2-L Motherboard

4 Answers

Soltek SL-75FRN2

soltek mainboard driver SL-75FRN2-RL

Jan 08, 2008 | Soltek SL-75FRN2-RL Motherboard

1 Answer

Soltek SL-75FRN2-RL

viga driver for soltek p4 vma-m

Nov 30, 2007 | Soltek SL-75FRN2-RL Motherboard

1 Answer

Sound & USB Drivers.

Try tinkering with the BIOS?

Nov 16, 2007 | Soltek SL-75FRN2-L Motherboard

1 Answer

Ide and sata hard drives

you need a converter

Oct 05, 2007 | Soltek SL-75FRN2-RL Motherboard

Not finding what you are looking for?
Soltek SL-75FRN2-L Motherboard Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Soltek Computers & Internet Experts

John Anderson
John Anderson

Level 2 Expert

310 Answers

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a Soltek Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides