Question about Lexmark Wheelwriter 1000 Typewriter

2 Answers

Lexmark Wheelwriter 1000 typewriter has stopped working

Our office Lexmark wheelwriter 1000 typewriter will not turn on today. I have changed the ribbon and also the batteries in the typewriter, but it's not coming on. All plugs have been checked to be sure they are in working order. When I try to turn it on, the lights blink one time and then nothing happens.

Posted by on

  • 1 more comment 
  • JoAnn704 Mar 23, 2009

    A label jammed. Now, when I turn on the machine, it beeps 6 times and lights 1 & 2 flash, but nothing else. I replaced the batteries. Anything else I can do?

  • beard1 Mar 30, 2009

    I have the same problem...beeps 6 times and 2 lights blink

  • jmilczski May 08, 2009

    No other opinions on how to fix this?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Lexmark Master
  • 3,594 Answers

There are a lot of possibilities fir this one but nothing easy.
If you can ship .it to us we will give you a free estimate. We are in Cleveland, Ohio.

DickyO
216-241-0027

Posted on Feb 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 215 Answers

Sounds like your on/off switch has went. seen this several times.

good luck,
razors

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my wheelwriter 1000 lexmark typewriter makes this hummin sound as though its stuke.


Lube the round chrome rod that goes throught the carrier, Carier is what hold the ribbons and daisy wheel.
Lube pulleys on the belt. You may need to lube the carriage return motor too.

Aug 21, 2014 | Lexmark Wheelwriter 1000 Typewriter

1 Answer

LEXMARK MS610DN CHANGE PITCH FROM 10 T0 12


On the Wheelwriter machines, it is the printwheel that determines what pitch you are in. The wheel has holes in it that a part "reads" the holes when the machine is turned on or when the printwheel is changed. You can not manually change pitch.

May 19, 2014 | Lexmark Wheelwriter 1000 Typewriter

1 Answer

The correction tape is not working properly. Wheelwriter 1000


If everything was working befor the ribbon & L/O change Either the L/o is not properly attached to the ribbon or the ribbon and or L/O are old. Make some corrections then remove and look at the L/o, if the letters are near the center of the L/O the problem is the ribbon or L/o is old, if the print is on the top of the tape it is not properly attached to the ribbon or not coming out or the cassette properly.
If you have a fresh set or another T/W that works swap the ribbons and look at how they are attached.

For a picture ngo to lexmark.com and click your way to publications you will find a downloadable manual there.

DickyO

Jan 23, 2010 | Lexmark Wheelwriter 1000 Typewriter

1 Answer

Personal Wheelwriter 2


Roxanne;

I an very knowlegeable about wheelwriters, I will be in the office today until 5:00 pm edt you can call at 216-241-0027.

DicktO

Mar 11, 2009 | Lexmark Wheelwriter 3 Typewriter

1 Answer

Storing information on the lexmark 1000 typewriter


For the LexMark Wheelwriter 1000 you can only "Reprint" the information you have typed. Once you turn off the machine the "reprint" mode will not longer retain information.

Jan 28, 2009 | Lexmark Wheelwriter 1000 Typewriter

1 Answer

Wheelwriter word spacing


On all Wheelwriters the spacing is set by the printwheel to change spacing change the wheel. 19 pitch to 12 pitch or visa versa.

DickyO

Jan 09, 2009 | Lexmark Wheelwriter 1000 Typewriter

1 Answer

Change Size of Type (Pitch to 12)


The pitch is set by the ptintwheel. To change it install a P/W with a 12 pitch i.e. prestiege elite 12.

DickyO

May 20, 2008 | Lexmark Wheelwriter 1000 Typewriter

2 Answers

Wheelwriter 1000 (IBM) beeping


You may have the R. margin there. Space all the way to the right, press R MAR key. You also could have spellcheck on code 1 will turn it off

Jan 28, 2008 | Lexmark Wheelwriter 1000 Typewriter

Not finding what you are looking for?
Lexmark Wheelwriter 1000 Typewriter Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...