Question about RCA Televison & Video

1 Answer

Will not start properly RCA D52W17

After sitting for a few hours. I turn it on and get the on light three times. Problem is getting worse. Can take up to 15 minutes of pushing the on button for it to start. After that it is fine. Second problem is I lost channel three with just a coxial cable. Had a TV repair shop tell me to use component cables, works fine. Nice TV and just moved to rural Idaho with no shops near by. Thanks, Gary i have replaced the cp 150 and still getting the three beeps and no picture what else can i do

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

There is a cap behind a heatsink on the Deflection board I believe it is CP150 or 180 which is a 2200uf/35v

Posted on Feb 09, 2009

2 Suggested Answers

Slinteriors
  • 8617 Answers

SOURCE: Will not start properly RCA D52W17

Replace CP150 , CP120 and CP114 that should take care of the Issue of hard to power up. You can get the replacement capacitors at the following link with free instructions.
http://servicemanuals.vstore.ca/

Posted on Nov 28, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a rca rear projection tv model number d52w17 and when i turn it on it beeps three times and after it beeps three times nothing else happenes. i have un plugged it and waited for 30 min like a friend...


You have a capacitor that has gone bad on the HV power supply board on the left side, the number is cp150.It sits behind an aluminum heat sink in the middle towards the front, it will probably be bulged at the top. Along with that since the board will be tilted up I would re- older all the connections on the HV transformer, that's the critter with the red lead coming out of it. Your done!

Dec 19, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

I have a RCA D52W17 rear projection T.V. When I turned the power on the green light flashed 3 times then shut off and now it won't go on at all.


Hi


Thanks for using FixYa. 3 blinks in your RCA D52W17 rear projection are caused due to 3 capacitors (CP114, 120 and 150) which are located on the deflection board. If any of these capacitors goes bad you’ll have to replace them with the exact same ones. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 21, 2010 | RCA D52W19 52" Rear Projection Television

1 Answer

RCA D52W17 wont come on, the green power light goes on and off three times then stays off.


On deflection board CK capacitor cp 150 2200uf 16v use 25v if i is puffed up on top it is Bad replace 2 more caps in same circuit cp114 cp120 220uf 35v for parts call Mats 1-800-628-1118

Nov 12, 2009 | RCA D52W19 52" Rear Projection Television

1 Answer

Will not start properly RCA D52W17


Replace CP150 , CP120 and CP114 that should take care of the Issue of hard to power up. You can get the replacement capacitors at the following link with free instructions.
http://servicemanuals.vstore.ca/

Nov 23, 2008 | RCA D52W19 52" Rear Projection Television

1 Answer

1995 rca 52 inch tv...


Please post the model number of your RCA as usually its a bad flyback and start up capacitor when you get a 3 blink error code . But I can help you better if I have the model number of your set.

Oct 24, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

RCA D52W17 won't stay on.


Possiblility include bad convergence cuircit. A component that is overheating and bad solder connections.. Technicians can use special equipment to read error codes... this will tell them the error that is shutting it down

Mar 13, 2008 | RCA D52W19 52" Rear Projection Television

1 Answer

Rca d52w17 hdvt rear projection Problem


If the light cycles on three time the micro is working but there is something shuting it down.a This is not clear cut it would need to be troubleshot. You need to call a tech.

                                   Packman

Oct 29, 2007 | RCA D52W19 52" Rear Projection Television

1 Answer

D52W17 Takes several attempts to turn on


Hello, sorry about taking so long to reply,do you still need help? If so let us know .Thank You for using FixYa and Have a Nice Day.

Oct 21, 2007 | RCA D52W19 52" Rear Projection Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...