Question about Venturer PLV36220S1 22 in. LCD TV

4 Answers

I have a venturer tv, no sound?

I put the dvd in, but don't have any sound. have sound when I put in a video. the model # plv 3622, 22''

Posted by on

  • hanmar3 Feb 09, 2009

    put in the cables on the side instead of the back

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I found an audio amp IC and indicated on the top of the chips is CHMC S0723. It should have cross reference can be found in ECG semi-conductor guide or NTE ICs manual. The pin#12 is the Vcc in 12VDC, pin#6 & #7 are audio input L&R.
Other solution is just hook an RCA cord right into its audio out of this set to your receiver and it will works.

Posted on Jun 08, 2011

  • catadelrosar
    catadelrosar Aug 06, 2012

    Hi, I have the same problem. My venturer not produce sound. The strangest thing is that when I try to change the MTS "mono" to "stereo", I cannot do it. The menu does not give me the option. Thank you.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Venturer Master
  • 848 Answers

This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:service@wisiny.com.thanks,we sincerely hope we can help you!
you can also check this boards whether suit you:
E202404 Venturer APC010A Power Supply Unit

Posted on Nov 11, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 26" LCD Venturer TV/DVD. When I turn it on it comes on for a few minutes then goes back off

Posted on Feb 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

No offence. But have you got the sound on the TV and the video Or DVD player turned up! Also have you checked your AV or SCART Connection?

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pvs21175s1 tv+Dvd ,the tv is fine but the dvd don't play the movies !!


Sounds like its laser pickup unit has gone faulty. Contact any service technician. The disc loading mechanism should be taken out from the set, for repair and this is a skilled work. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Jan 12, 2017 | Televison & Video

1 Answer

Why can't I get the DVD player to work? I have it hooked up to a cable box.


im wondering why you did not connect it to the tv ?? but instead to cable box , does it have a pass thru capability ?? does it need to be off to pass thru ?? as most dvd player don't have a rf output but instead use a hdmi or composite signal output , would it not be easier to connect one of these to a spare input on tv then when u want to use dvd you only need to select the proper input from tvs source button to view the dvd ??

Jan 10, 2017 | Sylvania Televison & Video

1 Answer

Can you repair a 24 inch BUSH smart TV/DVD.


Main power supply regulator board (SMPS board) fault. Check and replace it. If you wish to get more details visit the site linked here. http://electronicshelponline.blogspot.com/
Search the site by type in the brand name of your device in the search box at the top of the home page, to get gathered all the related posts.

Jan 09, 2017 | Bush Televison & Video

1 Answer

24inch Bush smart TV/DVD not working.


Could be an open internal fuse or power supply failure

Jan 09, 2017 | Bush Televison & Video

1 Answer

My govideo recorder model R6530 no disk appears when i put a DVD+R what am i doing wrong


The inability to read DVD+R disks probably is the reason the recorder was offered for sale on eBay.

Jan 07, 2017 | GoVideo Televison & Video

1 Answer

I have a GPX TV/DVD combo Model # TDE2280B. I have only used it a few times -- now will not play a DVD even with a external DVD player connected to it -- "no signal" is the only message I get.


Have you tried resetting the set to factory default.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 06, 2017 | GPX Televison & Video

1 Answer

Can not play movies from my DVD player to my Bauhn TV model no 0916/atvu65


You have checked the cable? And does the DVD play on another machine?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 03, 2017 | Televison & Video

2 Answers

I have a rca model led65g55r120q tv flickers and no sound


Check all cables for loose connection, try another input for picture (DVD, BLu-Ray, etc). If none of the other inputs work then it's a panel problem (display) If one or more of the others work then it's a problem with either the tuner or the signal.

Jan 02, 2017 | RCA Televison & Video

1 Answer

Veon tv manual


The eject button on the remote appears as an upward-pointing arrow with an underline - see below image. The eject button on the TV has a similar symbol.

4191bd4f-0bce-464a-b56a-423972698140.jpg


However, I suspect that in your case, you might not be having a Remote.

This link says that your TV doesn't come with a Remote and DVD cannot be ejected without the remote :
VEON 19 LED TV DVD FREEVIEW COMBO A1823511 1

Jun 28, 2014 | Televison & Video

Not finding what you are looking for?
Venturer PLV36220S1 22 in. LCD TV Logo

730 people viewed this question

Ask a Question

Usually answered in minutes!

Top Venturer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69787 Answers

Cindy Wells

Level 3 Expert

4805 Answers

Blake

Level 2 Expert

136 Answers

Are you a Venturer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...