Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

1 Answer

Can only program one mode of opening.

I can only program one opener, including keypad. I was told to unplug it for about 10 min, I did this for over 30 min, and still have problem.

Posted by on

  • Doorguy27
    Doorguy27 May 11, 2010

    Someone told you to unplug your opener? You should not have to do that. Unplugging it is a reset for over heating or other problems. Anywho I can with out a doubt help you but I need a little more info First what kinda of gdo do you have? How old and finally what color are the buttons on your remote them selfs.
    BTW GDO is garage door opener


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 244 Answers

Doorguy is on target. do not understand when u say you can program one opener including keypad. As keypad really acts like a remote, do you mean you can program keypad or a remote (NOT an OPENER which is motor on ceiling), but not both.

Posted on Feb 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door opens 10 min after closing and closes 10 min after ipening


try unplugging unit from power for a few minuted, then plug back in and erase all remote programs(hold in learn button for about 10 seconds or so). good luck, very odd

Dec 06, 2015 | Garage Doors

1 Answer

Garage door opener Chamberlain - programming problems


I bought a new keypad and 2 VISOR remote (30498). As to programming garage door opener, I did like here:
programming garage door opener
- it tooks me 20 minutes and works great

Feb 07, 2013 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I am trying to enter a new code on my outside garage door opener keypad, however, it does not have an enter button, what do I do after I already erased the old code. thanks


If your keypad is hardwired do this:

To program the keypad, first unplug the garage door opener from the electrical outlet. Next, remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next, enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.

Aug 31, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

The wired keypad (Chamberlain) of my garage door is not working. The red light on the keypad keeps blinking. Can someone tell me how to fix that? FYI, the garage opener, the remote, and the wall unit all...


You can try programming the keypad using the procedure below.

To program the keypad, first unplug the garage door opener from the electrical outlet. Next, remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next, enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.

Mar 14, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

How to reset code for keypad after reattaching wires


To program the keypad, first unplug the garage door opener from the electrical outlet. Next, remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next, enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.


Mar 05, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

How to program a remote entry keypad. There is no


Sounds like you have a hardwired keypad. If so:

To program the keypad, first unplug the garage door opener from the electrical outlet. Next, remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next, enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.



Jan 03, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Hardwired code opener no longer works


Here are the directions to program your hardwired keypad.

First unplug the garage door opener from the electrical outlet. Next remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next, enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.

Oct 28, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

How to change the password on the key pad for a garage door opener model number 13918415


Quick response. Thanks.

To program the keypad first unplug the garage door opener from the electrical outlet. Next remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next enter your desired four-digit PIN into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.

Sep 17, 2009 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

I have LiftMaster garage door model 41A3039 and Chamberlain wired keypad--how do I change the keypad code to open the garage door


To program the keypad, first unplug the garage door opener from the electrical outlet. Next remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.

Jul 13, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Garage door will only close with keypad code it will not open


UNPLUG THE UNIT AND WAIT 5 MIN.
WHEN YOU PLUG IT BACK IN CLAER ALL CODES BY HOLDING DOWN THE PROGRAM BUTTON FOR 20 SECONDS.
NOW TRY TO PROGRAM EACH REMOTE AND KEYPAD - IF THERE IS STILL A PROBLEM CHANGE THE BATTERIES AND REPEAT THIS PROCEDURE.

I HOPE THIS HELPS

Mar 31, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Garage Doors Experts

Al Clark

Level 2 Expert

290 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a Sears Garage Door Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...