Question about Cyberhome DVR 1600 DVD Recorder

1 Answer

Tells me i have no disk

When i load a disk it tells me there is no disk

Posted by on

  • 6 more comments 
  • cxmasc Feb 12, 2009

    recorder says no disk and hand book says i can use dvd+r or dvd+rw which i bought can't start recording or if time it does not work either

  • Anonymous Mar 09, 2009

    I put in the disk..It says No Disk

  • jackwacks Mar 11, 2009

    same problem, no matter what type of disc is inserted ,it loads then says no disc.

  • jackieslaw Mar 12, 2009

    after inserting any disc, it just says no disc.

  • charprice2 Mar 14, 2009

    No matter what disc I put in, it says "no disc"!

  • friiendly746 Apr 14, 2009

    does not matter what disc i put in it stills says no disc

  • Anonymous May 01, 2009

    my recorder plays the simple cd for example mp3 format, but don't play any dvd. If I put in a dvd to the recorder it says: "no disc"


  • Anonymous May 09, 2009

    I have the same problem but I don*t see any solution! What is the solution? Please help.....

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Winamp installed but no sound its states install proper sound drivers

Posted on Feb 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dvd player will not load disk and play?


From your description it is hard to tell if the problem is from the disk or the player. Can you try another disk? If that loads and plays the problem is with the previous disk you tried to load. If there is a problem with the DVD player, it will be cheaper to buy a new one than try to repair. You can even find DVD players at some of the resale shops for under $10. Good luck.

Apr 20, 2016 | GoVideo DVR4175 DVD Player / VCR Combo

3 Answers

No disk


what solution have you tried?

Jan 05, 2008 | DVD & Blu-Ray Players

1 Answer

Model SD-V290U: DVD rejects disk, will not play


The drive belt that locks the disk in place is worn out. The belt slips and the plastic pinion gear fails to move the rack gear. This is necessary to slide the cam into place that raises the disk to the centering ring. When it is raised, to micro switches are made that tells the system the disk is loaded properly at which point the lazer reader will advance to detect the disk.

Mar 13, 2010 | Toshiba DVD & Blu-Ray Players

1 Answer

Suddenly my DVD player is saying "no disc" after trying to load DVD. Why isn't it sensing the DVD has been loaded?


When a DVD goes into DVD player it has to spin it and read it. If your DVD player is not reading the disk. The disk could be dirty. The DVD player might need to be cleaned. You could be trying to play a PAL disk on a NTSC player or Visa Versa. or the region coding might be wrong. Try playing a clean disk that you have played in it before. That might tell you if you need to clean the DVD player.

Mar 03, 2010 | GoVideo DV2130 DVD Player/VCR

1 Answer

Every disk i put in tells me disk error.


Hello my friend
  1. Make sure that you connect right the disk(check cables and jumpers(master-slave)) and that there are boot-able files inside (operating system with the boot.ini,command.com or another boot-able file
  2. Make sure that BIOS/CMOS settings are correct(i reccomend load default settings) and they are recognize your hard drive(in system/hardware information)

Jan 23, 2010 | Philips DVD & Blu-Ray Players

1 Answer

MY DVD READS LOADING DISK THEN READS BAD DISK BUT I KNOW THE DISK IS GOOD


If you are encountering this error the basic thing to consider is that your lens is dirty thus it can no longer detect the disks.

You need to clean the lens of your dvd player. So you need to open it and look for the lens inside. You will need a soft earbud and dip in alcohol and gently wipe in the lens' surface.

Tell me if this works.

Aug 29, 2009 | Polaroid DVD & Blu-Ray Players

1 Answer

Wrong disk appars on tv


I DON'T HAVE IT FIXED BUT I HAVE TRY OTHER DVDS IN IT AND TELL ME
THEY ARE LOADING BUT IT TELL ME WRONG DISK ON TV WHEN IT FINISH
LOADING. I DONT HAVE A REMOTE OR A MANUAL.I BOUGHT IT FROM RESALE
STORE. I WOULD LIKE TO PURCHASE A MANUAL & REMOTE IF I CAN GET IT FIXED.

J. WORLEY

Jun 02, 2009 | Funai TruTech DVDVCR Dual Recorder

1 Answer

Player won't play some of my DVD movies


have you tried playing them again from "cold start" that is not after 5 in a row ?? are the disks clean and free of dust etc ??

Mar 09, 2009 | Samsung DVD-V1000 DVD Player/VCR

1 Answer

Disk Error


You can not fix this problem because the player does not read dvd recordable disks
Sorry!

Dec 18, 2008 | Toshiba SD-2700 DVD Player

1 Answer

Durabrand 8.5 dvd player


Is it the correct type of disc? Whilst these devices will play almost all 'commercial' disks In many cases 'burned disks' Cumputer Data disks and audio disks are a No No The manual/packaging will tell you which. You could try a Lazer cleaner disk. Failing that it looks as if the device is failing and needs replacing - I doubt if there is a repair option.

May 23, 2007 | Durabrand DUR7 Portable DVD Player

Not finding what you are looking for?
Cyberhome DVR 1600 DVD Recorder Logo

Related Topics:

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome DVD & Blu-Ray Players Experts

zappal

Level 1 Expert

48 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

Are you a Cyberhome DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...