Question about HP LaserJet 4250n Printer

1 Answer

HP 4200/4250/4350 papertray spring

In papertray 2 & 3, is a flap beside the sep. roller. That flap is held by a spring. I need a new spring, it's gone. Does anyone have the part number for that spring??? Or what do i need to order to get it. Hope you guys can help.

Posted by on

  • info517 Feb 11, 2009

    Sorry, not to be unthankfull. But I am a service person, that have a problem finding the part number for this part, that is, if it is available?? Hope some one have the solution. Alternatively the part number for the tray (500 sheet).

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,602 Answers

CALL A SERVICE TECH THAT WORKS ON THAT TYPE OF EQUIPMENT ONLY.

ROD

Posted on Feb 09, 2009

  • ROD GANDY Feb 10, 2009

    IM BEING TRUTHFUL ABOUT THIS MATTER, YOU MAY THINK IM BE MEAN BUT THE FACTS ARE THEY HAVE A PROBLEM AND A SERVICE PERSON IS THE BEST FOR THIS JOB. THERE IS ALOT OF WORK AND TRAINING GOING TO REPAIR THIS TYPE OF MACHINE, I WAS REALLY TRYING TO GIVE MY BEST ADVICE IN THIS MATTER.



    ROD GANDY THE CANDYMANGANDY

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Print envelopes


Are you using the tray 1 manual feed for the envelopes? If it was working for you before but now has trouble feeding from that tray you are probably going to need a new PU roller and sep pad. You can try and clean the roller with a lint free cloth and use isopropyl alcohol.

Sep 02, 2014 | HP P2035N LaserJet Monochrome Printer

1 Answer

Paper jam 2, check inside


You should troubleshoot jamming error message by removing toner cartrige, check if the little plastic sensors on the paper path are not stuck somehow, reinsert toner,close door, open back door check if the fuser sensor is ok ( and not broken), clean the papertray roller, restart printer and it should work. If that doesnt fix your problem it can be a faulty sensor or some tiny paper left somewhere you can't see and sensor detects .. Hope it helps.

Apr 07, 2014 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

I have an hp p3005 with the jam code 13.01.00. It has had the feed rollers and sep pads replaced. When it runs it appears to catch on the separation pad itself since it shows a small buckle in the middle...


Replaced seperation pad?. separation pad work is to block multiple paper feeding,but in yourcase paper not at all feeding means paper pickup roller not picking up the papers.replace both 2 & 3 paper pickup rollers..
See the snap shot,view from under.
Pickup roller( red)
Un lock to remove pick up roller(blue),observe the angle of the roller & same way insert new one other wise it wont fix..
Bee care full while removing roller, paper sensor flag should not distubed(yellow)
bee pateince dont do harsh..best of luck.


10_14_2011_2_48_48_am.jpg

Oct 11, 2011 | HP LaserJet P3005 Printer

1 Answer

When printing, the paper in the tray does not feed. It lifts but doesn't catch.


The printer's pickup roller needs to be cleaned or if its worned needs to be replaced. The pickup roller is the little blue rubber roller behind the cartridge. If it still doesn't catch you'll need to strip the machine down until you get to the springs that lifts the papertray. Stretch the springs a bit. This will cause the paper to be pressed against the pickup roller. Re-assemble the machine and try it.

May 16, 2011 | HP LaserJet 1300 Printer

1 Answer

Paper tray doesn't raise on my brothers hl5250dn printer. Says papertray empty


I have had the same exact problem; make absolutely sure that the exit chute is seating properly. With the exit chute open (as if to clear a paper jam) actuate the white spring loaded clips that hold the exit chute, mine were not traveling to their full extension and by moving them a few times this resolved and the exit chute was held more firmly and the rollers spin the right direction.

Jan 30, 2011 | Brother Lower Paper Tray Feeder / Tray for...

1 Answer

Hp 4000N 41.3 unexpected paper size


Clean the sep. rollers one in the paper tray and one inside the paper tray port. Then clean the feed roller. Its behind the sep roller in the paper tray port. You must look close with a flash light. It has 4 D feed rollers. It will rotate down to clean them do not knock the spring off. Use only water on a cloth no alcohol. Steven 818-888-0006

Mar 11, 2010 | HP Office Equipment & Supplies

2 Answers

Ricoh 1027 ADF grabs multiple pages causing adf jam


you need to replace the lower of 3 rollers in the ADF (sep roller), for a temp fix you can clean this roller with wd40 as it will soften the rubber and get it to "grip". these rollers (lower of three) are always the first to go "bald on any mnf copier in the ADF and Drawers causing multiple feeding. they are used to allow one page at a time as they either turn backwards or offer torque (resistance) to lower pages

Aug 04, 2009 | Office Equipment & Supplies

1 Answer

No suction using extension hose for Bissell Bagless Upright vacuum. i checked for clogs and found nothing. shannon


Check the sole plate where the beater bar is. You may have to remove the roller brush flap to get into the roller brush and then check the main dust channel beside it. Usually if there's no suction on the hose it means that:
1) The hose is blocked 2) The filters are needing cleaned / washed and dried for 24 hours or see my tips! 3) There is dust clogging after the beater bar/roller brush.

Jul 18, 2009 | Bissell CleanView II Plus Upright Bagless...

1 Answer

My Minolta Di151 keeps jamming up in the paper feed I have practically taken it apart Any suggestions?


Clean sep pad, clear take up roller, check one clutch spring inside large white gear (clean and lub) also check the solinod bad spring, tacky glue for sponge that is on lever up part of solinod. check electrical connection to soln. Replace entire sep unit.

Jul 02, 2009 | Minolta Office Equipment & Supplies

1 Answer

Hp LaserJet 1200 Printer


open cover eject toner and toner flap cover open {spring flap cover} clean drum if your problem not solve so check fuser assy
teflon sleeve

most of your spot problem solve after you clean toner drum
otherwise replace toner drum or toner cartridge

Feb 27, 2008 | HP LaserJet 1200 Printer

Not finding what you are looking for?
HP LaserJet 4250n Printer Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...