Question about Tag Heuer WAF2110.BA0806 Aquaracer Automatic watch

2 Answers

My TAG Aquaracer bezel moves counterclockwise

I recenlty acquired a lovely TAG Aquaracer 300 meters watch, but I've noticed that the bezel tends to move counterclockwise of its own accord. Any solutions to this problem ?

Posted by on

  • Anonymous Mar 18, 2014

    fighter command watch. Bezel is scratched up. Would like to replace it.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,334 Answers

Yes, there are solution for that, but you will not be able to solve it yourself as the new part is needed.
That new part is called BEZEL SPRING and it is fitted underneath the bezel.
Bezel spring has special hooks pressed into it and allows to turn the bezel one way only (anticlockwise), at the same time stopping the bezel to turn clockwise.
Another cause can be that the dirt and grime are collected between the bezel and the watch case (this is where the bezel spring is located) and is stopping functionality of the bezel spring by leting the bezel slide over the hooks. This can be fixed by cleaning the watch case in ultrasonic cleaner.
Anyway- if the bezel is rotating on its own, I suggest that the bezel spring is broke and you will need to replace it.
Do not forget to rate, please.

Posted on Feb 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Very helpful. But where can I get a replacement bezel?

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Purchased a new 18k gold bezel to replace the bezel that has the gold worn off.


whats the problem are you trying to fit the new bezel? you will also need to ensure the bezel retention spring is with the bezil

Apr 10, 2014 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

Hi, I've got a automatic tag aquaracer watch that loses about 4 mins every month (about 4 yrs old). Common problem? Can this be fixed ? Or is it a lemon of a watch? Any advice welcome. Cheers.


If it's automatic and 4 years old, it's probably time for a watch overhaul. Auotmatic watches need overhauled about once every 4-5 years. It's normal for it to lose time, but 4 minutes per month may be a little extreme. So, get the watch overhauled. I would recommend Tag Heuer to overhaul it.

Sep 09, 2011 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

I have a CAN1010 TAG AQUARACER CHRONOGRAPH and whe reset it the second arm doesn't reset to 0 but instead stops 2 seconds before..


This works! Loosen the bezel all the way. Pressing the bottom button, press one time the topmbottom and see how the chrononhand corrects by one second towards zero. Do it again and have it reset. Tighten the bezel. Thats it

May 13, 2011 | Tag Heuer Aquaracer Quartz Chronograph...

1 Answer

Which way does the bezel turn on a tag watch


Tag Heuer watches are constructed with scuba-diving bezels-- that is to say, it only turns COUNTERCLOCKWISE. This is so that when you are diving, you set the triangle marker to the time you went down. If you accidentally bump your watch while diving, it will move only counterclockwise, leading you to think you have LESS time left to dive, which is so much safer than thinking you have MORE time to dive, than you really do.

May 03, 2011 | Tag Heuer 2000 CN1110.BA0337 Wristwatch

1 Answer

Can't change time on tag heuer aquaracer 300 meter


Hi please make sure that the knob is pulled all the way out. If it is you need to take it to a watchmaker.

Cheers
Dave

Jun 21, 2009 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

I own a tag heuer Automatic aquaracer watch and I noticed that when I set the hour, I pull it to position 3 and to move the time (forward) I have to turn the crown counterclockwise. Is this correct?


Yes it is correct as your watch has a counterclockwise crown forward setting direction. This is due to the specificaly layered lever and setting gear construction, so, nothing wrong with your watch.
Do not forget to rate, please.

Jan 26, 2009 | Tag Heuer AquaracerWAF1110.BA0800 watch

1 Answer

I am unable to return to the 0 crown Position - TAG-CAF2112


The aquaracer has a 'screw-down' crown.  This means that the crown needs to be screwed in the reset it back to the 0 position.  

Jan 09, 2009 | Tag Heuer Aquaracer CAF2112.BA0809 Wrist...

1 Answer

SCRATCH ON BLUE BEZEL OF WATCH


If it a scratch on a brushed surface try one of these watch Brush pens
Here only a couple bucks

If it is on a polished surface

try a cape cod cloth here

both are indispensable watch collectors items.

Dec 30, 2008 | Tag Heuer 2000 Aquaracer WAB2011.BA0803...

1 Answer

Ladies aquaracer 300 meters


the crown is a screw down type to keep the watch water tight. Unscrew the crown (what you refer to as the dial) and you will then be able to set the date, time, etc. and be able to wind the watch manually. P.S. You unscrew the crown by rotating it counter-clockwise.

Jan 27, 2008 | Tag Heuer cj1110.ba0576 Wristwatch

Not finding what you are looking for?
Tag Heuer WAF2110.BA0806 Aquaracer Automatic watch Logo

Related Topics:

1,754 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tag Heuer Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

Are you a Tag Heuer Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...