Question about 2wire Wireless-G 802.11g ADSL Gateway

2 Answers

Wii error code 51330

My nintendo wii has connected wirelessly to my computer for about 8 months then about 2 weeks ago just stopped working, my DS still connects fine, my router is 2WIRE, I changed the channel to 1 and 11, the WEP key is correct, the 802.11 thing is on g/b I disconnected and reconnected the router, I turned off all firewalls, and I ttryed everything else the the nindendo error code website suggested to me, can someone please HELP ME!!!!!!

Posted by on

  • Anonymous Apr 09, 2009

    I have the same problem. I set the wii up to a static IP address, that worked for a few days, but then it dropped it again. The only way I can reconnect seems to be restarting the modem. I tried with dmz enabled and disabled, I could connect to the nintendo server, but it gets dropped after a few days.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 864 Answers

This error code usually indicates a problem relating to wireless security. Please try the following troubleshooting: Are you using WEP or WPA security on your router? Log into the router using the default IP (consult your router's manual for assistance) Locate the "wireless security" section of your router settings and find the WEP or WPA key. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters). If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot. If you are using WPA, the Wii console is compatible with the following types: WPA - PSK (TKIP) WPA - PSK (AES) WPA2 - PSK (AES)
If your WEP or WPA key is correct, then the problem might be related to MAC address filtering: From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model). If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings). If the Mac address filter was disabled, then continue troubleshooting.

Check Nintendo's router info for special notes, if available, for your router. Click here to go to our Wireless Router lookup page. Use the drop-down box to select, if available, your router manufacturer. Click on your router's model number, if available. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings: On your PC, click "Start" and then "Run." Type "CMD" into the field that appears to open a new window. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.

Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response.

Posted on Aug 27, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

Your Wiis internal Wi-fi may be defective/ malfunctioning.

Posted on Aug 07, 2009

3 Suggested Answers

SOURCE: I can't get my DS and Wii to work on Wi-Fi with model 2701HG-B

turn up the power and change the wireless channel in the wireless settings

Posted on Oct 21, 2008

  • 1 Answer

SOURCE: Unable to connect wireless

How do you change the channels on the router (as referenced above.  If it makes a difference, I have a Mac using OS .

Posted on Oct 25, 2008

  • 8 Answers

SOURCE: 1 modem connected to 2 computers

Wireless is not the best thing to do heavy online gamming with. He he wants to keep a solid connection wile playing, ethernet is the way to go.

Posted on Aug 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to change my nat setting from strict to open can't find anywhere on belkin wireless router settings


Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

Goto : my blog for more information about belkin routers (Page is still under construction )

Jun 23, 2010 | Belkin Wireless-N Wireless Router with...

1 Answer

I enabled the NAT but it still says MODERATE, how do I open it?


LINKSYS ::::

NAT STRICT

Step 1 : Connect Router - Computer

Step 2 : open Router Setup by typing http://192.168.1.1 on the address bar of internet explorer (Default Password is Admin )

Step 3 : Click Applications and Gaming

Step 4 : Click DMZ

Step 5 : Select Enable and Give the IP Address of the XBOX/PS3/Wii in it

Step 6 : Click Save settings

Step 7 : Unplug the Power cord from the router and turn Off XBOX /PS3/Wii

Step 8 : Plug the power cord back to the router and wait till the lights are Solid

Step 9 : Turn on the Xbox/PS3/Wii

Step 10 : Test the Connection

let me know if this works

Regards
TOM

Jun 10, 2010 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

I have problems connectiong to wii


Hi,

Restart the router and reconnect all over again. If problem persist please see your service provider.

Cheers

Apr 14, 2010 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

Can somewone help me pls i need some help with my wii and seting it it alwAYS gives me an error code 51330 and some more help me pls thanks for your help???////


1. Are you using WEP or WPA security on your router?
1. Log into the router using the default IP (consult your router's manual for assistance)
2. Locate the "wireless security" section of your router settings and find the WEP or WPA key.
3. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F.
4. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F.
5. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters).
6. If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot.
7. If you are using WPA, the Wii console is compatible with the following types:
* WPA - PSK (TKIP)
* WPA - PSK (AES)
* WPA2 - PSK (AES)

2. If your WEP or WPA key is correct, then the problem might be related to MAC address filtering:
1. From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model).
2. If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings).
3. If the Mac address filter was disabled, then continue troubleshooting.

3. Try adjusting the "Channel" your wireless router broadcasts on. We highly recommend setting your wireless router to either channel 1 or 11. This can potentially increase the download speed. For information on accessing your router's settings, click here to select the brand name and model number of your router (if available).

4. Check Nintendo's router info for special notes, if available, for your router.
1. Click here to go to our Wireless Router lookup page.
2. Use the drop-down box to select, if available, your router manufacturer.
3. Click on your router's model number, if available.
4. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

5. Ensure that the router is set to broadcast in "mixed" or "b/g" mode. Routers set to "g only" may not be able to allow a successful connection from the Wii console. (The option to change this setting is typically found in the "Wireless" section of your router's settings. For information on accessing your router's settings, click here to select the brand name and model number of your router, if available.)

6. Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings:
1. On your PC, click "Start" and then "Run."
2. Type "CMD" into the field that appears to open a new window.
3. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.

7. Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response.

hope this will help..

May 24, 2009 | Dynex Enhanced-G Wireless Broadband Router

1 Answer

Internet not working; Router not connecting with Internet or Wireless Adapter


try changing the wireless channel that the router is on. it sounds like something is causing interference.

May 16, 2009 | Dynex Enhanced-G Wireless Broadband Router

1 Answer

Cannot connect my ds or nintendo wii to buffalo wca gaming access


If as "wired internet " you mean HI-SPEED internet access then .... Follow the instruction as per this manual
Be Sure it's connected to your Hi speed Modem.
If you do not have Hi speed connection It will NOT work at all.

Dec 30, 2008 | Buffalo Technology WCA-T 802.11b Wireless...

1 Answer

Fix this thing before my 20 oz estwing does......


Below are some links you can check out and see if it would help you make the gaming console connect to the net behind a 2wire adsl gateway.

Nintendo Wii behind a firewall/router:

Port Forwarding on a 2wire gateway:

Nov 06, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

I can't get my DS and Wii to work on Wi-Fi with model 2701HG-B


turn up the power and change the wireless channel in the wireless settings

Aug 31, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

Cannot connect to nintendo wii


i have same setup as you it is a problem with the type of connection i found retyping the connection back in it works

May 30, 2008 | Wireless Access Points

1 Answer

Networking


Yes, But you need to get wireless adapter for each of your computers.

Sep 09, 2007 | Wireless Access Points

Not finding what you are looking for?
2wire Wireless-G 802.11g ADSL Gateway Logo

1,398 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Wireless Access Points Experts

noti13

Level 1 Expert

15 Answers

AnyMHz.com
AnyMHz.com

Level 2 Expert

489 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a 2wire Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...