Question about SanDisk Sansa e250 MP3 Player

2 Answers

Horn Wont Blow, and Cruise Control Wont Work 2000 Chrysler Grand

Cruise Control Wont Work Chrysler Grand Voyager SE Minivan 2000 and horn wont blow

Posted by on

  • bustin69 May 04, 2009

    same as above how much will it cost to fix the problem

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Check all your fuses first, if OK, ck for power at the horn. Are your cruise controls on the steering wheel or on a stalk on the side? If on the wheel, I would say it might be a clockspring issue. In this case, the cruise and horn both use the same clockspring to get power. The clockspring allows power to go to the buttons on the wheel without breaking wires from the wheel moving during driving, Chryslers are known for breaking clocksprings. The clocksping is located inside the steering column and is not an easy fix. You have to pull the steering wheel. Do you hear a click, feel a tick, or feel anything unusual in the steering wheel just prior to these issues. Sometimes you can feel the clockspring break, the wheel will "catch" for a second before the plastic breaks inside of it.

Posted on Feb 12, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Open up the hood of the car and look at the horn cord (it should start in near where the steering wheel is) see where is ends you just fill up the container with water

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Security horn on Tucson sounds without reason


after market alarms. Take it to the dealer that sold it to you. Tell them to remove the aftermarket alarm.

Mar 07, 2015 | Hyundai 2007 Tucson

1 Answer

2004 toyota corolla ac stopped working


First make sure you have freon..
when you turn it on do you hear a faint "single click"?? If you don't, switch your horn relay with the compressor relay. This may work.

Feb 25, 2014 | Apple iPod touch Second Gen (8 GB,...

2 Answers

My Element mp3 player wont turn on


When your player freezes, it will only start up and not play the songs or even the buttons won't respond to your pressing them, it is more like your computer hanging and never coming back to working fine unless you restart it. The first thing you should try to do is read the instruction manual and check where the reset button in your MP3 player is. Take a small pin and push the reset button. This will make you player go off for and then you can put it on again and it will work fine. However, there is a possibility of data loss when you reset. Most of your stored stuff will be gone after reset. Another thing that you can do to retrieve your player is doing a firmware update. Do a refresh of your firmware and see if it works, in most cases, it does. Other options are the same that you and everyone else will try as soon as you MP3 player freeze. That is opening the MO3 player and taking out the battery. Set the battery back and push the power button again. It is always a good idea to do a firmware upgrade right after .you can also open it up and blow on it.

Sep 30, 2009 | MP3 & Digital Media Players

1 Answer

Hi.my name is katherine and i dropped my smasung yp p2 in water and it wont work what shud i do this happened yesterday 06-17-09


try blow dry let it dry for a while in a warm place, becareful not to expose it to high temperature for a long time

Jun 18, 2009 | Samsung Yepp YP-P2 Digital Media Player

2 Answers

The little wheel doesn't work


where your memory stick goes and blow into it that should help you

Apr 18, 2009 | MP3 & Digital Media Players

1 Answer

My philips gogear sa3025/37 wont work


The SA3025 is not compatible with Macintosh. It will show up as "Internal" or some such, but you won't be able to load the songs into there properly. That is why the documentation says:
System requirements
• Windows® 2000, XP, Vista

-Tha Mp3 Doctor

Dec 19, 2008 | Philips SA3025/37 Flash MP3 Player

4 Answers

My ipod nano wont do anything


you pulled the cord out to fast so it probably jamed it. just send it in and get a new one.

Jul 22, 2008 | Apple iPod nano 3rd Generation

1 Answer

Wont turn on


Sounds like it could be a problem w/ your battery. You might try removing your battery and blow out any dust or crap thats gotten back in there.

Jan 01, 2008 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

Philips mp3


last night i turn of my mp3 player and this morning that i try to turn it on it wont turn on and i change the baterry it still dont turn on.

Apr 17, 2007 | Philips GoGear SA261 MP3 Player

Not finding what you are looking for?

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk MP3 & Digital Media Players Experts

kakima

Level 3 Expert

96576 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a SanDisk MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...