Question about Kenwood KDC-MP238 CD Player

1 Answer

Radio wont come on

Changed battery in car now kenwood KDC-MP238 wont come on. pulled wiring and have power to radio. nothing lights up manually or with remote. what happened??????? Rich

Posted by on

  • luckrb Feb 09, 2009

    tried the reset button and the same results. do you reset it with ign. on??? thanks, Rich

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 323 Answers

There should be a reset button on the unit. That would probably be the first thing I would look at.

Posted on Feb 09, 2009

  • Dalynn Turner Feb 10, 2009

    Yes, it should go through a diagnostic test.

    One other thing you can do is hook your KDC-MP238 straight to the battery and that will tell you if there is anything wrong with the unit itself. If you get power then you can narrow it down to power or ground issue.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the time on my Kenwood KDC-MP238 cd player


You will find the manual to your Kenwood KDC-MP238 at this link. The clock settings are found on page 10/11. However for a quick try on your own. Put the headunit on STANDBY then press B. Boost button for 1 second, that will take you into the menu. Select CLK ADJ, press the Control button on the right hand side of the headunit for 1 second. The clock display should start blinking. Now use: Control button up/down changes the hours. Control button left/right changes the minutes. When you set the time, press B.Boost button to exit.

http://www.kenwoodusa.com/Support/Car_Entertainment_Owners_Manuals/ select model from drop down list.

Good Luck
dreamsystems

Feb 06, 2011 | Kenwood KDC-MP238 CD Player

1 Answer

Kenwood kdc-mp238 says protect and i cant hit any buttons


if there is a reset button, try pushing that. if there isn't try disconnecting power to the radio for a few minutes. also try checking the speakers to see if they are shorted out, or if the speaker wires are shorted to ground or have any bare wires.

Dec 30, 2009 | Kenwood KDC-BT742U

1 Answer

Just bought vehicle, kenwood KDC 722 stereo wont work till enter 4 digit security code.... ANY suggestions??


You have to go to a Kenwood car audio dealer in your area. They will pull the unit and get the serial # off the deck, call Kenwood and get you the code. If you pull it yourself you can save a little $... If you don't have the manual, go to www.kenwoodusa.com type in your model # under support and you can download install manual as well as user manual for free. Depending on the vehicle, it could be very quick or take an hour or so to pull the unit, it all depends on the mount. Hope this helps

Dec 12, 2009 | Kenwood KDC-MP238 CD Player

1 Answer

Installing kenwood kdc-mp238 in a 2001 dodge ram 2500 quad cab


No ur radio is fine to fit the wiring harness into ur dodge the wiring has been crossed so it wont work, if u go 2 the Kenwood US site and down load the KDC MP 228 manual it has a good wiring dirgram and with a bit of work u can work out what goes where :0 Hope this helps

Oct 11, 2008 | Kenwood KDC-MP228 CD Player

Not finding what you are looking for?
Kenwood KDC-MP238 CD Player Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...