Question about La Marzocco FB-80 Series 3 Groups Coffee Maker

2 Answers

No water coming out of the group head?

3 g la marzocco older style around 15 yrs old, manuel

two outside groups work but the middle one just stopped working?
Any clues?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,618 Answers

Your problem is either the brew solenoid or the brew switch.

Posted on Feb 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

I have a similar problem to the above question, but mine is flowing but just in my mind i dont think it is enough, and it seems the a bit more water is coming out the exhaust port then i remember, The espresso shots are coming out beautiful but i have to have a courseish grind to do it. I have a Unico Splendor 1group machine, they have faema e61 group head. Solenoid done, last year, seals last year, rubbers all new.... so am baffled..any help would be greatly appreciated...

Posted on Apr 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

La marzocco gb5 left group is leaking water constant... how to stop


The hissing inside might be a leak from the vent valve or the level probe connections to the boiler. The leak from the middle if it is not the paddle version or group cap version then the plunger in the solenoid needs to be replaced. If it is the group cap version the plunger in the solenoid and or the gasket inside the group cover might need to be replaced. Before you open the group cover make sure you have replacement parts. You will need H1006, L103/A and L103/B and L100H.

Jul 05, 2014 | La Marzocco GB/5 Series 4 Groups Espresso...

1 Answer

La Marzocco Linea 3AV...water is coming out of group heads but is not hot. The boiler for the steam is hot. Help?


Your front brew boiler likely has a dead heating element or there is a problem with the electrical system for the front boiler.

Aug 03, 2011 | La Marzocco FB-80 Series 3 Groups Coffee...

1 Answer

La Marzocco GB 5, 2 group head boiler not starting. It says coffee boiler 1 30.8 C. Please help


New machine? check the thermal reset on top of the left group head. Press the red button and see what happens.....

Aug 17, 2010 | La Marzocco Linea Series Group 3 Espresso...

1 Answer

Restricted flow on the middle group of a three group fb80


Either the water is restricted at the flowmeter pipes usually the on leading to the solenoid, or the solenoid needs to be checked, the inlet hole might be blocked.

May 20, 2010 | La Marzocco FB-80 Series 3 Groups Coffee...

1 Answer

Water dripping from my boiler/dispensing pressure gauge


If it is leaking from the gauge then have it replaced ASAP. It is easy to replace, just make sure machine is turned off and cooled and water is turned off.

May 12, 2010 | La Marzocco FB-80 Series 3 Groups Coffee...

1 Answer

The left group head on my GB5 is not engaging.


Remove the diffuser screw and screen and check the holes in the screws, they might be blocked, press brew button with screen removed to see if you have water flow.

May 06, 2010 | La Marzocco Linea Series Group 3 Espresso...

1 Answer

Buzzing Espresso Machine


that noice is from your solenoid valve during brewing coffe.
  1. as first you should clean the group with blind filter and special detergent for washing coffe from group. if you didnt do this long time you should repeat the cleaning 3 - 5 times same day.
  2. if you follow the 1st instruction but you have the problem again you should change your solenoid valve.

Mar 18, 2008 | La Marzocco Linea Series Group 3 Espresso...

2 Answers

Unable to programme La Marzocco


hello
you need to check your flor meters. they could be scaled or dirty. you need to dismantle flowmeter that is on the side that is not working and clean it. make sure the water main is off and power is shut off. hope this helps.

Feb 29, 2008 | La Marzocco Linea Series Group 3 Espresso...

Not finding what you are looking for?
La Marzocco FB-80 Series 3 Groups Coffee Maker Logo

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top La Marzocco Coffee Makers & Espresso Machines Experts

Kelley Hopper

Level 2 Expert

57 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Are you a La Marzocco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...