Question about 2wire (1000-400108-001) Router

1 Answer

I have a desktop connected to a ICONNECT ACCESS621 ADSL 2/2+ ROUTER, how do I connect my laptop to the same modem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 78 Answers

The 2+2 means: Combo feature, means 2 computers can connect and access internet at the same time ( one via USB and the other via Network Port) So connect one with a network cable and the other with a usb cable.

Posted on Feb 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wt8951nd


Power cord
RJ-11 telephone cable coming from a splitter or the extn. line of your landline phone.
Ethernet cable coming from your Desktop/Laptop connecting RJ-45 port
Most standard ADSL modems have four/five lights in the front :
Power light to indicate electric power to the modem.
ADSL light indicates the status of ADSL sync. When the modem is synchronized with the ADSL line card at the other end of the circuit/loop, the DSL light will be steady green.
LAN light will glow steady green when the modem detects a successful link to a computer or router ethernet port.
ACT i.c. Activity light glows when the modem is sending and/or receiving data on the lan and wan. It will vary between very slow to fast flashing and steady green to indicate lan/wan traffic.


for more help visit CBR Tech Solutions

Feb 08, 2014 | Routers

1 Answer

Unable to connect EpsonTX710W Printer viaNetGear DG384


On your Laptop go to Control Panel-> Printers-> and then add printer. Select the option of network printer and search for your printer. If found add it.

Or Else check the ip of printer from ports tab in printer properties on desktop computer ans search your printer with ip address on Laptop.

Jun 01, 2010 | NetGear DG834G Router

1 Answer

Wireless Router showing as connected, but cannot access Internet.


You have _THREE_ separate network connections to check:

1. your router, through your ADSL modem, to your ISP;

2. your computer, through an Ethernet cable, to your router;

3. your computer, through its wireless adapter, to the wireless adapter in your router.

So:

1. Connect the Ethernet cable from your laptop directly to your ADSL modem, bypassing the router.
Turn the router off.
Restart the modem.
Restart the computer.
Click Start
Click Run
Enter CMD and press ENTER
Enter IPCONFIG and press ENTER
You should get output like:
Ethernet adapter Local Area Connection:
* IP Address. . . . . . . . . . . . : 123.456.789.249
* Default Gateway . . . . . . . . . : 123.456.789.1
* Subnet Mask . . . . . . . . . . . : 255.255.255.0
Enter PING 123.456.789.1 and press ENTER
If PING does not respond, then telephone your ISP, and get them to trouble-shoot your connection.

2. Turn off the ADSL modem.
Connect the Ethernet cable from your laptop to one of the LAN ports on the router.
Turn the router on.
Restart your computer.
Click Start
Click Run
Enter CMD and press ENTER
Enter IPCONFIG and press ENTER
You should get output like:
Ethernet adapter Local Area Connection:
* IP Address. . . . . . . . . . . . : 192.168.0.100
* Default Gateway . . . . . . . . . : 192.168.0.1
* Subnet Mask . . . . . . . . . . . : 255.255.255.0
Enter PING 192.168.0.1 and press ENTER
If PING does not respond, then your router is not working.
If PING does respond, connect another Ethernet cable from the WAN port on the router to the ADSL modem.
Turn the modem on, and wait until the flashing-lights on the modem, and on the router, settle-down to a steady pattern.
Type PING WWW.GOOGLE.COM and press ENTER.
If PING responds, then everything is fine.

3. If you fix #1 and #2, above, then your wireless adapter should work.

Apr 02, 2010 | Routers

1 Answer

11g wireless adsl modem router tew-435brm


virgin media is dsl not adsl which is the router you had

Nov 27, 2008 | Trendware TRENDnet TEW-435BRM 802.11g...

1 Answer

RG54SE II


Hi,

In your wireless router,U want to configure the ip adress of internet,may R u static ip R dynamic ip address,

1. Statis ip customer means, configure the static ip address in your wireless router,

2. Dynamic ip customer means, configure the ip address of the ADSl modem ip.

May 20, 2008 | MSI Wireless-G RG54G3 Router

1 Answer

Connecting wireless router to laptop computer


Please confirm that this model is indeed a wirlles Modem/ ADSL Router and not just a Wireless Router without the ADSL/ Modem capability??

Apr 20, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Belkin wireless set up


Hi, As you ave the modem in bridge mode and also it works ine with wired connection just follow the instruction below for wireless
1.Login in to the router - > wireless settings

2.Configure your wireless using SSID and WEP and save settings

3.Laptop : Using windows wireless client configure the client using the same SSID ,WEP as configured in the router(view available wireless network in wireless properties)

(by default OEM wirelesss client takes over the wireless configuration in branded pc.to disable it and use windows wireless client..control panel ->administrative tools -> services -> enabl2 wireless zero configuration)

14.after all configuration shut the desktop,laptop,router,mdm and pwr them in seq..first modem and then router and then your desktop or laptop

Cheers !!!

Feb 24, 2008 | Belkin (F5D7231-4) Wireless Router

3 Answers

Setting up linksys adsl2 modem


The ADSL, Ethernet, and USB ports are located at the back of a Linksys modem. These ports are where the phone cable and computer will be connected. The ADSL Line should be connected to the ADSL port and the computer either be connected to Ethernet or the USB port., If u r using a ethernet cable no need to run the setup cd just connect the ethernet cable and contact ur isp..
do not worry about ur sagem modem, let it be inside.. just connect ethernet cables alone..

To setup a Linksys ADSL Modem with usb cable you need to perform two steps:
  1. Connecting the Devices Together
  2. Installing the USB Driver
Connecting the Devices Together
Step 1:
Connect the phone cable to the wall jack with ADSL service and then connect the other end to the ADSL port of the modem.
Step 2:
Make sure the power adapter is plugged to an available power outlet.
Step 3:
Connect the USB to the USB port on the back of the modem and then connect the other end top the USB port of the computer.
Step 4:
Power on the modem. After connecting the device together, install the USB driver. For instructions, follow the steps below.
Installing the USB Driver
Step 1:
Power on the computer.
Step 2:
When the Hardware Update Wizard window appears. Click Install the software automatically (Recommended).
NOTE: Windows XP has pre-installed drivers for the ADSL2MUE and will automatically install the USB driver for the modem.
Step 3:
Click Finish.

Nov 06, 2007 | Routers

Not finding what you are looking for?
2wire (1000-400108-001) Router Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Routers Experts

Bob S

Level 1 Expert

15 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a 2wire Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...