Question about Newisys isys Barebone 2100-E VSP Enterprise Server 1U Dual Opteron w/478W PS ETA 6/22 (2100E)

1 Answer

Newisys 2100 - How /where to get the SCSI driver for Window XP

Hi All,

I just brought a second hand Newisys 2100 server which comes with a LSI SCSI controllor and two hot plug SCSI hard drives. I am putting a Window XP and find it does not support the hard drives. I have downloaded a driver from LSI (lsi_scsi.sys and encountered error during the loading.

Is there anywhere I can download a set of drivers for it?

Francis

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Get the one from sun for a v20z

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

7 Answers

Trouble installing Windows Server 2003 on Netfinity 5500


Disabling Application Error Reporting on Windows Server 2003 (and XP, also)
Preface:
There is absolutely no good reason to disable this service in pre-release, or released software. If a program or computer crashes, then once the computer recovers it makes a detailed report (with no personally identifiable information it) about how the crash happened and sends it off to Microsoft. They then look over it, and try to fix it, which makes a better OS for everyone. This is not a recommended procedure.
Method:
Click the Start button, and right-click My Computer and click Properties from the pop-up menu
my-comp-properties.png In the System Properties dialog that has come up, click the Advanced tab, and then the Error Reporting button
system-properties-advanced.png In the next dialog click the Disable radio button, and optionally, so you don't get any notices of system failures at all, uncheck But notify me...
error-reporting.png Now press OK, Apply, and OK, and Error Reporting has now been disabled.

Jun 24, 2008 | HP Compaq ProLiant DL380 G4 Server

2 Answers

I cant intall window 2003 in IBM server x3400 , wher to find the SCSI driver < took me 24 hours and i didnt find it yet anyhelp thx.....


Hi,

You can install Windows 2003 using IBM Service Guide CD. Its an image file (.iso) . Burn it after download . Then boot from cd and follow the simple wizard . Find the link below

http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5088993

Thanks

Nov 15, 2011 | IBM x3400 Server

1 Answer

Can't


Is this any help? en.wikipedia.org/wiki/Host_adapter

Feb 09, 2010 | Dell PowerEdge 1600SC Server

1 Answer

Hp ml350 g3 how can i install window xp on it and run it as pc


The problem you will have is with the RAID drivers as HP does not support running XP on this box. You can try to load these using the F6 option during the XP installation but no promises that it will work. Try using a Server 2000 or 2003 driver.

You may get lucky and be able to find an XP driver for the specific SCSI chip set used on your controller. If so, then you should have no problems.

Jun 06, 2009 | HP NetServer E60

1 Answer

Poweredge 1800 server


Hey,

I looked over the spesifications for the poweredge 1800 servers, go ahead, it will work perfectly but there is one problem in the windows XP setup, you will need to insert / load SCSI or SATA drivers for the hard drive With a floppy disk, or if you don't have a floppy drive your going to need to create a custom windows xp setup cd and add the drivers into it so it can start the SCSI or SATA hard drive and finish the install. without the drivers it might not find the hard drive.

Aside from that I don't see any other problems. You should be able to get the drivers, and everything ese from dell site
http://support.dell.com/support/downloads/

Actually I looked over the dell downloads, I see only windows 2000 on the list with windows server 2003, and 2008 and linux distributions.

This could be a 2nd problem, drivers might not be avaialble, or work with xp, but we might be able to get it to work.


So two problems, SCSI or SATA drivers in windows xp / windows 2000 setup

2nd problem is in windows xp drivers, you could try windows 2003's drivers and 2000's and see if they work, if not, then we would have to look for drivers ourselfs from the internet.

So xp might cause headache but we might get it working, windows 2000 seems to be supported perfectly.

Let me know how the project goes
Thanks,
Ekse

Jun 03, 2009 | Dell PowerEdge 1800 Server

2 Answers

Can not install windows server 2003 on Acer Altos G710


Hi! Turn off computer check cable & power cable connection. Windows 2003 Operating System will not support SCSI Drives.

Apr 08, 2009 | Acer Altos G710 Server

1 Answer

Problem with scsi driver proliant ml 370 for NT4


Are you attempting to boot from the Windows CD?

If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things.
You need to provide the driver for the RAID controller of the server (this can vary, depending on the version of the ML370 e.g. G4/G5)
If it still cannot detect the hard drive after providing the driver for the RAID controller or if there is not a driver available for NT4, it may not support the controller.
In this case you can remove the RAID set by entering the RAID setup (could be LSI or adaptec). NOTE THIS WILL DESTROY ALL DATA ON THE DISKS THAT ARE A PART OF THIS RAID SET.

Dec 26, 2008 | HP Compaq ProLiant ML530 Server

3 Answers

Install windows xp pro


Hi
My is working , i have same dell server 1600 , i download the driver from LSI website here is the link
http://lsi.com/storage_home/products_home/host_bus_adapters/scsi_hbas/lsiu320/index.html?remote=1&locale=EN

you just need u320 scsi driver for server 1600sc

download XP driver 32 bit it will work
victor

Jul 04, 2008 | Dell PowerEdge 1600SC Server

2 Answers

Long beep sound eg. beeeee beeeee beeee


Check your RAM there is dust or no correctly fix in slots.

Oct 18, 2007 | Dell PowerEdge 1600SC Server

Not finding what you are looking for?
Computer Servers Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Newisys Computer Servers Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Newisys Computer Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...