Question about Jack Lalanne Power Juicer (Stainless Steel)

2 Answers

My UNIT-does nOt operate at all.

You can contact me at ceLL: 917-676-5268
hOME #: 718-513-1049.

Thanking You In advance.
I'll be waiting for your reply as soon as possible.

Posted by on

  • younggirl151 Mar 07, 2009

    my unit will hum when plugged in, but doesn't turn all the way on to juice the fruit.

  • mstanford123 Mar 29, 2009

    My unit will not turn on, it will not hum, nothing. I have taken it apart and put it back together again at least 10 times, everything is snug and snapped in place. I cannot figure it out. I just purchased 200. worth of fruit...help!!!

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 53 Answers

Hey if you have not gotten this resolved already, here are some things to consider.
I have the same unit. It will not operate is any little thing is left undone. So, I would recheck all of the assembly to make sure all the attachments are properly and securely attached.  The last part to check which seems rather minute, but will prevent the unit from working, is to check that the pulp catcher is securely snapped in. There is a small lip at the bottom that must clik in just right for the unit to kick on the switch is pressed.  Once the metal arm is in place, give it a whirl.... and let see what happens.
Hope this helps..
Let me know.
enov8

Posted on Mar 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 48 Answers

I had the same issue with my juicer, it will not turn on or any sign of turning on at all. My issue was the base(motor) has a safety switch on the bottom of the base where the pulp bin goes but it was not being pressed when I place the pulp bin b/c the little plastic protruding rod that presses the safety switch on the base was broken. The fix is simply to plug that hole with something and make it protrude a tiny bit so that when the bin is in place the switch gets pressed. I used aluminum foil. Hopefully this helps someone from wasting money on new base/motor etc.

Posted on Sep 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

JUICER WILL ONLY GO IN REVERSE


I talked to an Omega tech, and he walked me through a home fix. If you open the juicer and look at the switch from below there are two sets of connections. Just move the red, blue, white connections to the opposite side (make sure the unit is unplugged when doing this).

Mar 11, 2014 | Omega 8003 Nutrition Center Juicer

1 Answer

Omega 8003 will only reverse


I talked to an Omega tech, and he walked me through a home fix. If you open the juicer and look at the switch from below there are two sets of connections. Just move the red, blue, white connections to the opposite side (make sure the unit is unplugged when doing this).

Mar 11, 2014 | Omega 8003 Nutrition Center Juicer

1 Answer

I need a operating manual to dissemble and clean my juicer. cannot seem to get it apart to clean. can you help? Bill it is a CL-003 ap machine Lack la lanne


If this is the Jack La Laine one, I have a manual at home and am willing to scan dissassemling instructions and fax them to you. You can email me at ariryan49@yahoo.com Give me to the weekend to get it together for you.

Feb 23, 2011 | Juicers

1 Answer

I have a moulinex juicer model 864 but no operating instructions , please help.


Hi,
I had the same problem and when I researched, I discovered that this particular model (864) had been recalled. I spoke with the company- who you may contact at 800-526-5377- and they sent me a shipping label to return the unit. They will either replace or repair. Hope this helps.

Jan 15, 2011 | Moulinex Juicers

2 Answers

Plastic arm bracket to hold bowl and cap in place while in operation snapped. Can I replace this piece?


wait if you have the old 1000 the new latch arm will not fit i tried it but if you the new 1000 go to omegajuicersdirect.com and find parts and email paula for info

Jul 31, 2010 | Omega 1000 Juice Extractor

2 Answers

Manual for an OscarJuice Extractor ?


Hi!

You can download the manual from the link---

Oscar juice extractor

This is the only one available. Please rate this solution as fixya if found useful.

Thanks
Rylee

Feb 24, 2009 | Oscar Juicers Living

2 Answers

Looking for instruction manual


Sorry for being this late, but Here is the manual for Oscar 900
Operations are same as on other models.

Jan 11, 2009 | Juicers

4 Answers

Darn thing STILL won't turn on


There is a little knob on pulp collector that pushes in a switch, probably to assure the unit is assembled before operation. Mine broke off. I opened bottom of unit and used electrical tape to permanently engage the switch. The Juicer now works. I consider it poor construction that such an important part of the operation of the unit is able to break off and poor customer relations that there is no help for this on their web site. I have used it only a handful of times and the unit has mostly been in storage and has not been abused.

Jun 11, 2008 | Jack Lalanne Power Juicer 250 Watts

1 Answer

Juidelady jl500 juicer replacement parts


Hi there,

I also have a Juicelady, & need a part(s) HEre is a probable solution to your problem!

In the U.S.A. or Canada call 1-800-233-9054 to order the part. Or see if they have it in stock.They will ask for your address & phone number. Have your serial number ready-it should be on the bottom (or possibly the side) and you may need a magnifying glass to read it! It starts with the letters JL, and mine was JL500 (so look for that-but your may be a different model, I gave you mine so you have an idea of what to look for.)

Note: Anywhere else, or to check them out online:

The same warehouse is also at foxinternational.com if you'd rather see what they offer that way--but we got our call answered after waiting les than a minute. They even had the part we require but won't ship to Canada, so if your Canadian--call anyway, as it is a different part than we required,( the arms that brace the unit together.)

Hope this was helpful for you!

Mar 09, 2008 | Juicelady JL500 Juice Extractor

Not finding what you are looking for?
Jack Lalanne Power Juicer (Stainless Steel) Logo

Related Topics:

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jack Lalanne Juicers Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Roger Paull III

Level 2 Expert

177 Answers

Are you a Jack Lalanne Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...