Question about Cyberhome CH-DVD 300 DVD Player

1 Answer

Status light yellow, won't power on

I have a CyberHome CH-DVD 300 that won't power on. It is plugged in, and the cord looks fine, but the status light is yellow and it won't power on. No where in the manual does it mention what a yellow status light means - only red and green. If I press and hold the power button for 10 seconds (to try and reset) the status light turns red while I'm holding the button in, but as soon as I let off it turns yellow again. Likewise if I try to push and hold the open/close button - the light turns green, but the second I let off it turns yellow again. Any idea what a yellow status light means and/or how to fix it?

Posted by on

  • 3 more comments 
  • oaney Feb 11, 2009

    Did you get a fix on this? I inherited the player from a family member. The other thing I noticed is yellow light seems to strobe. I can hear a thumping in the audio as well

  • lcamp518 Feb 14, 2009

    I have the same problem. What does the yellow status light mean. When you push and hold one of the other buttons it changes colors.

  • tw2009 Feb 15, 2009

    I got the similar problem for my Cyberhome CH-DVD 300 --- It does not power on. The small status light is yellow. The light turns to red when power on/off button is pushed, and turns green when "open" button is pushed. How about $5.00 for a real solution?

    TCW

  • Anonymous Feb 16, 2009

    That didn't work on mine . . . I tried that before posting the problem. Thanks though.

  • Latdingo1 May 11, 2010

    It didn't work for mine

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey, I just unplugged my Cyberhome DVD for about 5 minutes and replugged it in. It is working fine. Try it with yours and let me know..


Lcamp518@zoominternet.net

Posted on Feb 15, 2009

  • Cmll_jrdn Dec 13, 2011

    I'm having the same problem and unfortunately un-plugging and re-plugging was un-successful.

  • Charlie Glass
    Charlie Glass Mar 04, 2015

    Me too

×

3 Suggested Answers

  • 2 Answers

SOURCE: Cyberhome CH-DVD 300 Player Remote?

Try 724

Posted on Jan 25, 2008

SOURCE: Cyberhome CH-DVD 300 DVD - YELLOW light indicator of what problem?

I have the same problem, but I know what the cause is. Mine stopped working right after we had a power failure, so I suspected a power problem. The +5V DC supply from the power supply pcb is only at 3V. I removed the wires for the +5V and patched in a USB cable to provide +5V and it is now working fine. I noticed that one of the capacitors on the power supply pcb is buldging on the top, so it's probably bad. I'm going to try to replace it and see if it fixes the problem. The simple answer is that your power supply pcb is not working correctly.

Posted on May 18, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The DVD player on my Bush 32inch television takes in DVD's but just displays 'No Disc' the model number is DLED32165HDDVD Is it something I can fix?


The player has failed, these types of devices are not fixed as the cost to repair is in some cases more than a new one. More than likely you could not get parts for it even if you knew the cause, which is most likely a failed laser light

Jan 06, 2017 | Bush Televison & Video

1 Answer

My sansui dvd player just displays "hello" and very dim, I am unable to select any function. What could be the problem?


Power supply regulator board (SMPS board) problem. Whether check and reply it, or replace it with a new one. If you wish to get more details, visit the site linked here.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/

Jan 06, 2017 | Sansui Televison & Video

1 Answer

Hi good night my NHN3-W57 dvd player stop working after I change the battery


Does it work with the power supply? If not maybe a wire has come off. Can you send pictures?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 01, 2017 | Televison & Video

1 Answer

My factory DVD player will except disc the ejects it


If I understand your rather cryptic post correctly...

This very well could be a Blue-Ray disk loaded into a
non-Blue-Ray capable DVD player. Your car player's capabilities MUST match the disc, otherwise, the disc won't play.

I've run into this very same problem with my home DVD players. Which both are non-Blue-Ray capable, but I was able to verify the Blue-Ray discs on my PC.

Jan 02, 2015 | Televison & Video

1 Answer

How do I determine if it a power failure or if it is a faulty SC board (TNPA5335)?


That does nost sound normal. I would take a look at the output of the power supply. Look at your electrolytic capacitors on the power supply board. Do they look like the top of them has popped up? If so you can get replacement capacitor kits from www.lcdalternatives.com

Jul 09, 2014 | Televison & Video

1 Answer

Can't switch off tv


All tvs draw a current so long as they're plugged in, this is what allows a remote device to power them on. Modern tvs will generally have a light to designate this (I think this is what you're referring to as standby). The only way to cut the current to your tv would be to unplug it or if it's connected to a surge protector, switch that off.

Jun 28, 2014 | Televison & Video

1 Answer

When CRT JVC TV is first turned on, the image looks shrunken and warped, eventually, the image looks fine. What to fix?


SMPS fault. Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
Check all the electrolytic capacitors.

May 26, 2014 | Televison & Video

1 Answer

How could I connect a Daewoo 42sm TV?, I can't afford cable so I use a converter box(analog to digital w/rabbit antenna)on my other TV and I was given this Daewoo TV and would like to watch it;please


If your converter box only has RF outpit connectors "F" type screw on it looks like this my be more of a monitor then tv.I took a quick look at the manual and didn't see any RF inputs so it appears it doesn't have tuners built in Looks like you'll need a box that has RCA output connectors.or others that will match what the monitor has on it for input types

Mar 06, 2014 | Televison & Video

2 Answers

Blu Ray - DVD player does not respond to remote


Did you check to see if remote pickup on player is cleal and not being blocked?

Dec 15, 2013 | Televison & Video

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

775 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

zappal

Level 1 Expert

48 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6393 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...