Why in thw world did my screens just stop working?
At first the phone worked fine. i took very good care of it, i didnt drop it, step on it, or anything. about 2 months after i got my phone the inner screen started to malfunction. when i opened to the inner screen and closed it again the outer screen would start malfunctoning. so i would turn the phone off and turn it back on agin and the outer screen would be working fine. so i just didnt open to the inner screen anymore. but i accidentally opened to the inner screen and i turned it off and turned it back on again, and the 2 screens were totally blank (blue)!! does anyone know how this happened and how i can fix it??
Re: why in thw world did my screens just stop working?
This EXACT same problem happened to me and I had to pay $50 to some
cell-phone repair guy to replace the whole front piece of the
phone....I HATE Kyocera and will NEVER buy ANYTHING from them ever
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you fix it by yourself..need to make the phone or board dry... gentle open the screw (w/care) the use hair blower all over with it.not only the touch screen... otherwise,need to replace touch screen or bring it to the nearest service center
well wen you dropped it did the ink move luiek the colours where were wrong for example the white was pink etc.. if this has happened ,and it is common in touch screen phones, the phone is no longer good you can still keep it if you want but the problems will get worse n worse until its just gone
caring for the touch screen includes touching the screen with clean and DRY hands., if your phone fell in the water, it will likely damage the touch screen.. contact your nearest LG repair center.. i hope your phone will soon be fine..
hello...there is probably an contact problem between the display and the circuit board..if you havn't dropped it in any liquid it's possible that you can fix this by carefully adjust the "rubber" electric connector exactly to the "pads" on the circuit board..please be thorough to make sure that you hav enough "contact pressure" so that the display will have all segments working..it may be a "frameholder" problem!...if this desn't make it work, go to your local mobilephone serviceshop and talk with them...maybe they have some spare parts.......good luck...Ron
my phone barely got wet at all but wont stop viberating either.everthing else works fine. i set it on a table to go on the computer and the viberating just stopped and i dont know why but right after that it just started viberating again. i got some tips from some other people that didnt work 4 me but it might work 4 u. u could try doing a master reset which just taking out the battery when the phone is on and it resets or u can try blowing on the battery in case it somehow got some dust on it.
There is some pieces on the board inside your phone you broke off when you dropped it.
It will need to be fixed by a technician. Hopefully you didnt brake the flex cable. Have them check the cable before doing anything else.
Ok, you can open it. BUT PLEASE BE CAUTIOUS AND VERY CAREFUL !! here is a website that explains how-to open the phone and there is pictures. read carefully and go step by step !! good luck.