Question about Jensen JER-422 Universal Remote Control

Open Question

Teknique Remote Auto Find Code Needed

I have lost the codes for my Teknique Jumbo Remote Control. I have various devices it used to control. For my Sky box I had to use the built in auto find option which tries all codes for you until you find the right one. I figure I could find all my lost codes with this function.

Could anyone post the key combination required to make the remote do this?

Thanks in advance.

Posted by on

  • daffster Feb 08, 2009

    Edit I found my sheet. This is it's instructions in case they help anyone else. By the way where it says 'a second or even a third time' be prepeared for many more attempts than 3!!

    ==
    First power on the equipment to be controlled. Press the SET button and don't release, then press the equipment control button (such as tv / vcr etc). The red light will be on. Release the SET button then press the SET button again, the red light will be flashing. Press the POWER button, the remote controller will transmit a signal to power off the equipment. If the equipment cannot be powered off for the first operation, try a second or even third time until the equipment is powered off. When the equipment is powered off, the code will correspond with the equipment. Press the button for the equipment (such as TV) to save the setting.

×

3 Suggested Answers

  • 1 Answer

SOURCE: teknique remote control

i have the instruction but can scan the basics but pages of codes. let me know what brand you need.

Posted on Apr 15, 2008

  • 1 Answer

SOURCE: Teknique Jumbo Universal Remote Control Instructions

Pacific TV - Press "SET" and Hold it, press "TV" and release it, then release "SET", then type one of these codes 0676, 0677, 0678 or 0679. After each code try powering off the TV using the remote. One should work. (I think the 2nd one worked for me).

Posted on Dec 26, 2008

  • 5 Answers

SOURCE: Teknique Universal Jumbo Remote Freeview Codes

I have a scan of the instructions, email me at davyburns @ googlemail . com without the spaces in the email addy

Posted on Apr 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have innovage jumbo remote. Lost codes. Need for sharp tv and motorola cable box


http://www.remotecodelist.com/remotes/innovage/Jumbo_Universal_Remote.pdf

here you go.

Dec 07, 2009 | Innovage Jumbo Remote Control

2 Answers

The sharper image jumbo touch panel remote control, can program every appliance (tv, dvd,etc.) except my directv hd receiver. no codes listed in booklet for the hd receiver, tried the codes for regular...


The instructions that came with my remote were COMPLETELY incorrect. I made note in pen in my jumbo remote manual. After hours of searching the web and piecing together various blogs, I wrote these easy-to-use instructions:
  1. Place the jumbo remote and your old remote on a flat surface, head to head, with a 1" to 2" space in between (the remotes should be aiming at eachother).
  2. Press and HOLD the device button on the jumbo remote (eg. TV) until the jumbo remote's small indicator light turns solid red.
  3. Press the LEARN button once on the jumbo remote. The light will blink rapidly.
  4. On the jumbo remote, press the button that you want to perform the learned action (eg. If you want the jumbo remote to turn your TV on and off, press the POWER button on the jumbo remote).
  5. Press the same button on your old remote (eg. POWER button on my old tv remote control). When the jumbo remote's light changes from rapid flashing to slower flashing, press ENTER on the jumbo remote.
  6. You're done! Try the jumbo remote out (eg. Aim the jumbo remote at your TV, press the jumbo remote's TV button, then press the jumbo remote's POWER button). Your television should turn on or off with your jumbo remote.
You can program any jumbo remote button this way (eg. MENU, EXIT, MUTE). Just make sure you press the same button on each remote in steps 4 and 5 (eg. MENU on jumbo remote, MENU or LIST on old remote).

Jan 04, 2009 | One For All URC-9910 LCD Remote Control

2 Answers

Teknique Universal Jumbo Remote Freeview Codes


Hey there,

I don't know for sure, but this might help. I asked a question myself then managed to find my own instruction sheet. My question was about the 'auto find' function where the remote tries all codes until you find one that works and store it. Hope it helps!

==
This is it's instructions in case they help anyone else. By the way where it says 'a second or even a third time' be prepeared for many more attempts than 3!!

==
First power on the equipment to be controlled. Press the SET button and don't release, then press the equipment control button (such as tv / vcr etc). The red light will be on. Release the SET button then press the SET button again, the red light will be flashing. Press the POWER button, the remote controller will transmit a signal to power off the equipment. If the equipment cannot be powered off for the first operation, try a second or even third time until the equipment is powered off. When the equipment is powered off, the code will correspond with the equipment. Press the button for the equipment (such as TV) to save the setting.

Jan 02, 2009 | Jensen JER-422 Universal Remote Control

1 Answer

COde to let a Universal Jumbo Remote work with a sky+ HD Box


don't have a answer! i need a code for my jumbo control for my tv Samsung DYNA Flat

Dec 29, 2008 | Universal Remote Control Remote Control

2 Answers

Teknique jumbo remote


where are the codes? hold set then press tv etc then enter code. I need the codes please

Jul 22, 2008 | Jensen JER-422 Universal Remote Control

2 Answers

Teknique Jumbo Universal Remote Control Instructions


Pacific TV - Press "SET" and Hold it, press "TV" and release it, then release "SET", then type one of these codes 0676, 0677, 0678 or 0679. After each code try powering off the TV using the remote. One should work. (I think the 2nd one worked for me).

Jul 18, 2008 | Jensen JER-422 Universal Remote Control

2 Answers

Teknique remote control


i have the instruction but can scan the basics but pages of codes. let me know what brand you need.

Mar 20, 2008 | Jensen JER-422 Universal Remote Control

1 Answer

Teknique Jumbo Remote Control


Hypnojohn. Please send me your email address. I will scan the instructions for you

Feb 25, 2008 | Jensen JER-422 Universal Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

1,206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Jensen Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...