- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The solution to a dvd/cd player saying no disc when there is one or start to load and freeze up is bad condition of the lense of your dvd/cd player. The lense has started to fail. All you need to do is have the lense changed.
Have you turned the TV speakers off within your Audio setup and turned on you external speakers? Your 510 then becomes your speakers. Also eliminates potential for audio synch issues. This done mean you have to turn both the TV and Audio system on everytime you want to "TV" programs. Good luck.
Protect mode will kicking whenever a fault is detected.
Causes that can start protect mode are:
Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.
Bad speaker wiring. Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.
Internal fault. Internal
fault is the natural cause for protect mode. If all the above did not
work, then the problem is a blown component or an internal fault. In
this case the unit must be taken apart , tested and repaired by an
experienced person. If the unit is less than one year old, or if you
want to get service, call Sony at the phone number listed on the
First of all,if you are using rental dvds, there might be scratch which your dvd player might have an issue to read it;however,if you have tried many dvds in this player and you are having this issue, it is time to move on to another dvd player. I recommend a Pioneer dvd player. solutiondoct
It is most likely that the laser is not a problem because it can read the first part of the disk. If the laser is defective, it willn ot recognize the disk.
The problem is probably the seek mechanism. It can only access the inner tracks but cannot read the tracks further from the center.