Question about Samsonite Case & Tripod Kit for Digital Cameras / Camcorders
I have a samsonite tripod and a Son 35MM digital camera. I cannot seem to get the camera attached securely to the tripod. I have it screwed in the quick release pad, but it seems the weight of it snaps it right out. Am I doing it right or is there another way to secure this....thanks.
You have to push the quick release lever all the way over to lock the pad into the base. usually to the left...you will feel the base secure tightly to the tripod. If this doesn't work you may have the wrong quick release for this tripod.
Posted on Aug 16, 2010
It sounds like the bolt is not theading into the camcorder nut far enough. don't go more than a 1/2 inch up into the nut however. You might need a longer shoe bolt.
Posted on Jul 16, 2009
SOURCE: Adaptor for Samosonite Tripod
not sure about the brand tripod but all good ones have a 1/4 standard screw that has blank shoulder so it spins freely yet stays in place there..see your local pro camera store for a 'camera mounting screw'..... or order from samy's camera online
Posted on Dec 08, 2008
Try http://www.tripodquickrelease.com/Generic_Tripods.htm for that part. There is listed the widest selection of quick releases and support more brands than any other web site I’ve seen. Since the tripod is unknown they are the best bet.
Posted on Jun 25, 2010
Tips for a great answer:
Jan 04, 2014 | Samsonite Tripod
Dec 01, 2010 | Tripods & Monopods
Jul 26, 2010 | Samsonite Tripod
Feb 28, 2010 | Samsonite Triton PRO Tripod
Aug 01, 2009 | Samsonite Tripod
Dec 08, 2008 | Samsonite Case & Tripod Kit for Digital...
Nov 03, 2008 | AmbiCom V0552 Tripod
Sep 17, 2008 | Samsonite Tripod
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: