Question about Panasonic KX-FPG391 Plain Paper Thermal transfer Fax

1 Answer

NEED TO GET HANDSET RINGER BACK ON

MY HAND HELD SAYS RINGER OFF. NOW I CAN'T GET CALLS WHERE I NEED TO BE, BECAUSE I CAN'T FIND THE WAY TO TURN IT BACK ON AND LMOST LOST ALL MY ID CALLS ON  THE HAND SET TRYING TO. ITS A NIGHTMARE AS NOW I CAN'T GET MY CALLS FROM MY HUSBAND AT WAR IN THE POPPY FEILDS OF AFGHANISTAN. PLEASE HELP ME ASAP ANYBODY. THA KS

Posted by on

  • 1 more comment 
  • SULTANA POTTER
    SULTANA POTTER Feb 08, 2009

    THANKS A LOT BUT I TRIED MENU AND I GET TIO RINGER SETTING, SO I PUSH THE UP BUTTON AND IT JUST SAYS "GO BACK" AND EVERY OTHER THING I PUSH JUST SHOWS A LIST OF THINGS LIKE CALLER ID ,VOICE INHANCER ECT. NOTHING WORKS & ITS LIKE A CURSE.  SOMEONE WHAT'S WRONG WITH THIS THING. ITS A KX-FPG391.  ALL HELP IS GREATLY APPRECIATED, AS ITS CAUSED ME & MY HUSBAND TO BE OUT OF CONTACT FOR 4 DAYS NOW


    GOD BLESS




  • SULTANA POTTER
    SULTANA POTTER Feb 08, 2009

    DEAR FRIEND, NOTHING IS WORKING BECAUSE I DO NOT KNOW WHAT OR WHERE A (V) OR (E) BUTTON IS. I TRIED THE # KEY PAD AND ONLY THE (E) LETTER ON # 3 MADE A RINGING SOUND BUT FAILED TO TURN THE RINGER BACK ON, AND THE LETTER (V) THERE DIDN'T DO ANYTHING. IM READY TO TAKE AN AXE TO THIS NIGHTMARE, WHY CAN'T IT JUST DISPLAY RINGER ON OR OFF SELECTION IN THE SCREEN?

  • SULTANA POTTER
    SULTANA POTTER Feb 08, 2009

    DEAR jgwhomeequip,  THANK YOU SO MUCH FOR YOUR HELP. LUCKILY I JUST GOT A PHONE CALL AND IT RANG REAL LOUD.PTL!
    IT'S STRANGE THE SCREEN SAYS RINGER OFF--YET IT RINGS NOW. SO AM I RT IN THINKING THAT (V & E) LETTERS ARE ON THE # PAD. SOMETHING WORKED NOW. THANK YOU SO MUCH FOR YOUR PATIENCE.


    BTW, MY HUSBAND WAS ARMY STRONG AS "SF" FOR 12 YRS.  NOW HE'S DYNCORP'S LEAD IN THE P.E.F.(POPPY ERADICATION FORCE) FROM AKBUL TO THE HELMAND PROVIDENCE AND IS BEING ATTACKED DAILY.CNN DID A VIDEO & STORY 2 DAYS AGO ON THIS MATTER. THANKS AGAIN AND REMEMBER: TO LIVE IS CHRIST & TO DIE IS GAIN." GOD BLESS YOU! 
    GORDON & SULTANA

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

Where you check for your caller ID if you push the up button, you should be able to turn the volume up and down which will make the ringer louder or softer. And God Bless you and your husband. Hope all is well

Posted on Feb 08, 2009

  • Jeremy Reddick
    Jeremy Reddick Feb 08, 2009

    Ringer volume
    4 levels (high/medium/low/off) are available.
    Make sure the handset and base unit are not
    being used. The handset must be operated
    near the base unit and while OFF the charger.
    1. Press {MENU}.
    2. Press the soft key ({SELECT}) at “Ringer
    setting”.
    3. Press the soft key ({SELECT}) at “Ringer
    volume”.
    4. Press {v} or {e} to select the desired
    volume.
    5. Press the soft key ({SAVE}).
    To turn the ringer OFF
    Press {v} repeatedly until “Off ?” is displayed
    in step 4.
    L The handset will display “Ringer off”
    while not in use.
    L The handset will not ring for outside calls.
    The handset will ring at the low level for
    intercom calls.
    L To turn the ringer back ON, press {e} in step
    4.
    To turn the ringer OFF temporary
    While the handset is ringing for an outside call,
    you can turn the ringer OFF temporarily by
    pressing {OFF}. The handset will ring the next
    time a call is received.
    Ringer tone
    L You can select the handset ringer tone from
    one of 7 patterns for outside calls (page 83).
    Handset receiver volume
    3 levels (high/medium/low) are available.
    {SET}
    {HELP}
    {<}{>}
    {SELECT}{SAVE}
    {OFF}
    {TALK}
    {SP-PHONE}
    {HOLD/
    INTERCOM}
    {MENU}
    {e}{v}

  • Jeremy Reddick
    Jeremy Reddick Feb 08, 2009

    I dnt know, I am sorry, those are the instructions that are on the owners manual and the troubleshoot manual. Sorry I could not be of more assistance. The only other thing it said to try is to turn off the fax all together

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't turn the ringer on to notify when a call is coming in.


Without the model, I can't be sure of the method you need to enable the ringer.

Some Uniden phones toggle on a Silent Mode if you press and hold the # key (below 9 on the keypad) for 3+ seconds on one handset. When turned on, the phone will ask how long (1-9 hours) you want the ringer to be disabled for the handset. If no key is pressed within 5 seconds, the handset will not ring until the # key is pressed and held again.

Other Uniden phones have a Do Not Disturb mode. This disables the ringer on all handsets.To disable this, press and hold the DND button on the base. The answering system will be turned on if it isn't already on when DND is in use.

The other options to mute the ringer include the volume down on the handset when the phone is in standby. Some phones will also adjust the ring tone volume in the menu.

I hope this helps. Please add a comment with the model of your phone for additional information.

Cindy Wells

Apr 29, 2016 | Uniden Cordless Phone

1 Answer

MY POWER MAX 5.8 SAYS THAT MY VOLUME IS OFF ON ONE HAND SET--HOW DO I TURN IT ON? THANKS EILEEN CARTER beileenc@bellsouth.net


There are different ways to adjust the ringer and speaker volume on your handset. Please see your owners manual for model specific instructions.
On most single handset units:
Ringer volume: Press the volume up or down arrow rapidly to change the ringer volume.
Speaker volume: When talking on the handset press the volume up and down arrow to increase or decrease the volume.
On other models:
Ringer volume
In standby mode, press the volume up key or volume
down key on the handset or base to select one of three
ringer volume (Off, Low, or High).

Earpiece and Speaker Volume
You can select from among of six volume levels on the
handset, and ten levels on the base. Pressing the
volume up key or volume down key on the handset or
base during a call will change the earpiece or speaker
volume. This setting will remain in effect after the
telephone call has ended.
If you press the volume up key when the earpiece is at
the maximum volume level, an error tone sounds.
The error tone also sounds if you press the volume down key at the lowest volume.
Sergio

Mar 13, 2008 | Lands Phones

1 Answer

HOW DO I TURN THE RINGER ON. HAND SET READ RINGER OFF


Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing {OFF}.Adjusting the base unit ringer volume Press {^} or {V} repeatedly to select the desired volume.To turn the ringer off, press and hold {v} until the unit beeps 2 times

Sep 22, 2011 | Panasonic KX-TG5632 Phone

1 Answer

Somehow the ringer got turned off. Can't figure


Adjusting the Ringer, Earpiece and Speaker Volume

Adjusting the Ringer Volume

You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset or the base.

With the phone in standby, press or on the handset or VOLUME or VOLUME on the base. The handset or base sounds the ringer at that level.

Use on the handset or VOLUME on the base to make the ringer volume louder. Use on the handset or VOLUME on the base to make it softer or turn it completely off.

When you hear the ringer volume level you want to use, stop pressing keys.

The handset or base will use the new ringer volume starting with the next incoming call.

Note: If you set the ringer volume to Off, the handset or base won't ring. Other handsets or base will ring according

to their individual settings.

Muting the Ringer (One call only)
While the phone is ringing, press /Mute or END on the handset or on the base to mute the ringer

Sep 12, 2011 | Uniden Lands Phones

1 Answer

KX TGA244B How do I get the ringer back on


Handset ringer volume
4 levels (high/medium/low/off) are
available. The default setting is HIGH.
1 Press {MENU}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Ringer volume” by pressing
{V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the desired volume.
LTo turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5 Press {Save}.
Note:
LWhen the ringer volume is set to off, the
handset will display “Ringer off”, and
will not ring for outside calls. The
handset will ring at the low level when
paged by the base unit.

Jan 05, 2010 | Lands Phones

1 Answer

How can I turn the ringer back on? Thank you


1 Press (MUTE/FUNCTION).
2 Scroll to “Ringer setting” by
pressing öor ñ, and press á.
3 Press áat “Ringer volume”.
4 Select the desired volume by
pressing öor ñ.
•Each time you press öor ñ, the
volume will change and ring.
To turn the ringer OFF:
press örepeatedly until “Off ?” is
displayed.
5 Press á(Save key).
•A beep sounds.
To turn the ringer ON:
Press ñin step 4.
•The ringer will sound at the LOW level.
•You can exit the programming mode any time by pressing (OFF).
•If set to OFF, “Ringer off” will be displayed while the handset is not in use.
•If you have received new calls, “Ringer off” will not be displayed but
“Received calls” will be displayed while the handset is not in use.
“Ringer off” will be displayed for about 5 seconds after completing operations
or lifting the handset from the base unit or the charger.
•You can also select the ringer volume while an external call is being received.
Press öor ñwhile the handset is just ringing.
•You can change the ringer tone for external calls. See page 49.
HIGH
MEDIUM
OFF
Ringer volume
Low High
Ringer volume
Off ?
LOW
ñ
ñ
ñ
ö
ö
ö
V.M. access
HRinger setting
Initial set
--------------
HRinger volume
Ringer tone
18
LCD

Oct 26, 2009 | Panasonic KX-TG2352 Cordless Phone

1 Answer

Handset won't ring


You need to reset the main base and make sure the ringer volume is turned all the way up. Disconnect the power from the back of the main base, press and hold find hs key while reconnecting power until you hear long beep. Should reset base and handset.

Mar 17, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Turn ringer on T7316


T7316 Manual

The volume control adjusts the handset, hands free, headset, and ringer volume. Someone may have fiddled with the buttons and turned the ringer down enough that it doesn't sound when a call is incoming.

Feb 12, 2009 | NorStar Meridian M7310 Phone

3 Answers

KX-TG6052 two handsets. Can't get Talking-Caller ID to turn off!


to turn the talking caller id off go to the menu press 0 then * then 4, then press 0 again to select off.

to turn the ringer on the handset back on, go to the menu, prees 1, 1, then press 1 for a low ringer, 2 for medium and 3 for high.

Mar 15, 2008 | Panasonic KX-TG6052B Phone

7 Answers

Ringer off


The VT-9118 can use one of 4 different ring tones, and can be turned off. 

To reset your ring tone: 
  1. Remove the handset from the base. 
  2. Press PROG. You should hear a single short beep.
  3. Press #.  You should hear a single short beep. 
  4. Press a number 1 through 4. You should hear a long "ring" tone (it might be startling!). You can try other numbers from 1 to 4 to hear them all.  
  5. Press MEM to confirm your ring. You will hear a medium beep. 
To turn the ringer off, follow the same instructions, but choose number 5. 

Hope this helps you. If you need for information, you can download the user manual from http://www.vtechphones.com/docMgt/public/art/313/vt9118.pdf

Jan 17, 2008 | Vtech VT-9118 Cordless Phone

Not finding what you are looking for?
Panasonic KX-FPG391 Plain Paper Thermal transfer Fax Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5729 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...