How to use this Proview LCD Monitor 17" 700P AS A TV Screen
I am having one LCD Monitor 17" Model 700P working with a Desktop. As I have purchased a Laptop this I would like to use this LCD Screen as TV . Is this possible. if so what are the things that i need to have. Please explain. Thanks in advance.
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An user who is expert in 3 categories / brands.
Re: How to use this Proview LCD Monitor 17" 700P AS A TV...
How to use this Proview LCD Monitor 17" 700P AS A TV Screen?
This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:firstname.lastname@example.org,we sincerely hope we can help you!
you can also check this boards whether suit you: 860 AB0 190DTLA A2H PI 190DTLA PI 170DTLA 200 000 170DTLAH V7 860 AB0...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well, if the adjustment buttons don't work, then probably the control unit in the monitor is broken, or a key is stuck. If the control unit needs servicing, I doubt if it's feasible to have it repaired, given the fact that it's an old monitor and new or used nice slim LCD monitors can be purchased cheaply nowadays.
I doubt that you have a DC in that is in the shape of a rca connector. go to the web site that represents that proview device and try to get the manaul. don't plug any power into that jack until you are sure, and why would you want to run it on battery anyway.
ms_biguns, You need to test one or the other, The tower should output and drive a substitute known good monitor, or a known good pc should be able to display the WIN-desktop screen on your Proview 558. Could it also be that the software in pc not set up for driving a Proview558? 12fixlouie
probably failure in the LCD controller IC in the lcd controller board. that no signal was sent out to the lcd driver ic thus you could only see white display. A replacement of LCD panel is the best solution. I suggest to bring it to an authorized service center. best regards
I bought Same Monitor Dec. '06 and Jus last week It faded to black and then now doesn't power on. my protection plan sent me a new one that powered on for like 20 secs. So now I have another one coming. I also knows its not my PC cuz I'm using a monitor right now. I think Proview and Circuit City Sucks
You can see your monitor ranges ;
right click desktop -> properties -> settings -> monitor
You'll see Screen refresh rate here
under the that there is a box "Hide modes that this monitor cannot display" click that.
Now computer shows your monitor range in list. When you select bigger value different than list , gives error " OUT OF RANGE "
The problem is not your monitor, but the video card on your computer that it doesn't work on. If the video output on your computer is built in, residing near your keyboard / mouse ports, you can purchase another video card to put into your computer and connect your monitor up to that instead. If it attaches to a separate card inside your computer, just replace it.
There are three kinds you can get, AGP, PCI, or PCIe. Make sure you get one that will fit inside your computer.