Question about Dynamic MX91 Handheld Blender

2 Answers

Dynamic mx91. noisy.

Unit is making a noise. have taken it apart and the cooling fan seems to be lifting up slightly and rubbing against the windings. fan is part of the shaft, does this need new shaft or bearings or seals please help.

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Dynamic mx91, motor runs but blade doesn't spin, how do i disassemble the blade & shaft?

Posted on Jul 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

At the back end (top) of the shaft, there should be a thrust bearing. It may just be a single ball. Make sure it's in place. It keeps the shaft from oving up too far. If it's a ball type bearing, it sounde like it's not any good. If you have access to an industrial bearing supplied in your area, they will have what you need a lot cheaper than a parts supplier.

Posted on Feb 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got some noise with the dynamic blender mx91

Hello, mantratopryd

I was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take some of my personal time to see if Ican help. Even though this Informational site may not have your exact model orbrand, this site will help you a lot. Here is a site link about everything you want to know about blenders andpossibly yours, from
repair to trouble shooting it.

Please if this helped you at all, if you can find the time and in your heart torate my help and some kind words written would be appreciated for my free help, I would appreciate it.

Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help.

Thanks, Mike

Sep 11, 2011 | Dynamic MX91 Handheld Blender

1 Answer

Running slowly

Call Service at Novon -- they will help you determine the problem --

Feb 13, 2011 | Dynamic MX91 Handheld Blender

1 Answer

I nid parts for dynamic mx 91 - look at printable parts list with schematic --
or, call Novon at 925-417-0617 for live help.

Jan 27, 2011 | Dynamic MX91 Handheld Blender

2 Answers

I am trying to get a set of motor brushes for an mx 91 stick blender i am being quoted 40 quids but american sites say 12 dollars why

do you have an automotive generator shop in your area?
or auto electric repair.

my experience is that the people that own and work in their own shops are very knowledgable about motors and will sell you some compatible brushes, cheap.

just a warning. once I replaced the brushes in a wet vacuum and they were used up immediately! I guess the rotor was bad and the problem that ate the old brushes did the same thing to the new.

Feb 02, 2010 | Dynamic MX91 Handheld Blender

1 Answer

I need a new motor for my mx91 blender, wher cN I GET 1?

You can order direct from Novon

Most companies that deal with commercial restaurant equipment parts and service will also stock parts for this blender.

Aug 10, 2008 | Dynamic MX91 Handheld Blender

1 Answer

Mx91 Dynamic Blender Bearing failure

Since the blender costs over $600, yes.

Dec 05, 2007 | Dynamic MX91 Handheld Blender

Not finding what you are looking for?
Dynamic MX91 Handheld Blender Logo

Related Topics:

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynamic Blenders Experts


Level 2 Expert

94 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

76846 Answers

Are you a Dynamic Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides