Question about Projection Televisions

6 Answers

Pin code error - Projection Televisions

Posted by on

  • 1 more comment 
  • corranfarm Feb 08, 2009

    Hari86 thank you but did not work!! Aiwa model VX - T145K Thank you David

  • corranfarm Feb 08, 2009

    thank you praky 16 still no go

    Aiwa vx-t145K pin code error not letting me do any thing after first screen that tells me that I am .... wrong and unit is protected David

  • corranfarm Feb 08, 2009

    Thank you rockfixya very much and thank you all for your time and help now up and running very gratefull to all David

×

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Hi,
Do you see following Error in Aiwa TV-VCR Combo?

Pin code error - a4ca2c2.jpg

If this is the case, let me know to help you , how to get ride of it.
Thanks.

Posted on Feb 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The part# you listed is for a remote control. Please look at the back of the tele and reply with the correct model #.


A common code removal procedure is
1. Power on
2. Press both "CH/UP" key and "REC/OTR" key for more than 2 seconds.
3. "OK" will appear on the FL display.
Aiwa VTX145T Pin lock removal Turn set on. Press & hold vol down key on set & channel 7 key simultaneously for more than 2 secs - may work as well.

Thanks for using FixYa - a FixYa rating is appreciated!!

Posted on Feb 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

PIN code: Enter any pin code 3 times until "PIN CODE ERROR" is displayed, then hold "Vol-" on the unit and "7" on R/C together for >3 sec.

Thanks for using FixYa.

Posted on Feb 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

Hi just do the following things....Go to summary of channel and then press your remote control channel down until the check mark beside your channel that is locked is yellow.Press channel down once more so that the lock becomes yellow.Press on the number 0 on your remote and the lock should disappear.....

thank u rate me!!

Posted on Feb 08, 2009

  • Prakash Ram
    Prakash Ram Feb 08, 2009

    hii....type in as code 0000 or 1111or9999, 0000 should do the trick but it will unlock but every time you turn it on might ask for code so unlock go to menu and channel summary and and any channel that has a lock symbol get rid of it and fixya!t will work.... try this out....


  • Prakash Ram
    Prakash Ram Feb 08, 2009

    hi did u Tried unplugging it for five minutes then plugging it back in? It resets the software...

    thank u

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 289 Answers

Hi..u can solve this problem by just
reseting your set once.
try it out..
thanks..

Posted on Feb 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 19,396 Answers

Call Aiwa phone number listed on owner manual.

Posted on Feb 08, 2009

  • Ginko
    Ginko Feb 08, 2009

    The pin code can be unlocked by customer support by phone.

    Alternatively you can try the unlock procedure from link below:

    Aiwa Video repair tips and fault

    I quote:
    "Procedure to unlock pin code

    Enter any pin code 3 times when message `pin code error protected`
    appears hold down `ch down` on vcr and `7` on handset for 5 secs. `ok`
    then appears in display"

  • Ginko
    Ginko Feb 08, 2009

    The pin code can be unlocked by customer support by phone.

    Alternatively you can try the unlock procedure from link below:

    Aiwa Video repair tips and fault

    I quote:
    "Procedure to unlock pin code

    Enter any pin code 3 times when message `pin code error protected`
    appears hold down `ch down` on vcr and `7` on handset for 5 secs. `ok`
    then appears in display"



×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi wd-62628 flashing error code 41 (short) now what?


Short detected in standby power supplies. on pwr PCB check the following:
1)12VS @ connector PD pin 14: possible cause;IC9A23 circuit
Zener D9A41
2)5V @ connector PC pin 8: possible cause;IC9A21 circuit
Q9A12 circuit
zener D9A47
3)4.5V @connector PD pin 16 possible cause: F9E10
F9E11

Dec 28, 2014 | Mitsubishi Projection Televisions

3 Answers

I have a Sony Handycam DCR-PC100 that is now flashing an error code C:31:23 in the display when I try to play back the DV cassette in the video camera. Please advise what this code means and if the footage...


  1. Remove the battery or disconnect the AC power adapter for 60 seconds.
  2. Insert the battery or reconnect the AC adapter.
  3. Turn on the camcorder.
  4. If the error message appears, service may be required.
If your camcorder still shows the same error code, then you'll have to send in your camcorder for service.

Try playing the dv casette on another player, it should be fine.

Aug 11, 2008 | Sony Projection Televisions

1 Answer

I forget the pin code for my 61' toshiba tv how do i clear it


Dont know what model or how old your TV is but try this,
While the enter PIN code screen is displayed, press the RECALL key four times within five seconds and the PIN code will be cleared so you can enter a new PIN code but it has to be with the original remote. Worked with my old Toshiba TV about 2 years ago.
If it doesnt work I only waisted about 10 secounds of your time and I'm sorry.

Nov 13, 2011 | Toshiba Projection Televisions

1 Answer

Hello, my Sony wega KDF-60WF655 tv will not turn on. The power/standby led flashes 6 times and pauses then repeats. what is the problem with tv?


This error code is an indication of a b+ error voltage ... specifically a voltage of 6 volts known as dd voltage when the voltage is low pin 129 of micro

Mar 08, 2011 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

What is the pin code to unlock the tv


hello i've just check the manual do this If the wrong PIN code is entered, the message “Incorrect”
appears. Enter the code again, and then press ENTER.
If you cannot remember your PIN code
1. While the PIN code entering screen is displayed, press RECALL
four times within five seconds. The PIN code will be released
(Blocking Reset status restored).
2. Set new 4-digit code, and then press ENTER.
The LOCKS menu appears.
regards
shaun

Mar 06, 2010 | Toshiba 51H84 51" Rear Projection...

1 Answer

Mitsubishi VS-60707 60 in code 24


Because of the various voltages that are affected I would say replace T951 thats the most likely component.

Aug 05, 2008 | Mitsubishi VS-60707 60" Rear Projection...

1 Answer

Standby light flashes 5 times


That was for a different model sony have different codes for different Chassis if your model is KF42WE610 an error code of 5 blinks is a lamp error.
Lamp driver error 5 times - Lamp driver is faulty. No sound or picture will be the symptom. Replace lamp driver.

May 23, 2008 | Sony Grand WEGA KF42WE610 42" Rear...

1 Answer

DEAD TV


Look for 2 resistors off of pin 2 of IC951 R955 & 956 they are hooked in parralell and the tail end of those resistors are grounded.

Feb 23, 2008 | Mitsubishi VS-50605 50" Rear Projection...

1 Answer

Correct voltage for lamp connection?


(Lamp may light and go out) suspect bad lamp part # 915P020010 2. Check for 12-volts DC at J-9 connector pin 4 on the Engine Driver PCB, if missing check for an open F9A09 on the Power PCB, if it is open replace F9A09 part # 283P127060 and the Light Engine part # 939P977020 3. (Lamp may light and go out) Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if low or missing check C9A37 and C9A38 both 3300 UFD 10 V part # 181P732040 on the Power PCB (part # 930B921002) 4. At power on the lamp turns on and off three times and then the unit shuts down with a red lamp LED (lamp error). Replace the Light Engine part # 939P977020 5. Lamp enable line at J14 pin 6 does not switch to 5 volts after turn on, 12 and 5 volt supplies are good. Suspect the Light Engine part # 939P977020 6. Lamp enable line at connector J14 pin 6 on the Engine Driver PCB switches to 5 volts after turn on and does go to 0-volts (low) after 5 seconds, 12 and 5 volt supplies are good. Suspect the Lamp Power PCB (ballast) part # 939P978010 7. Lamp enable line at connector J14 pin 6 on the Engine Driver PCB switches to 5 volts after turn on but does not go back to 0-volts (low) after 5 seconds, 12 and 5 volt supplies are good. Suspect the Light Engine part # 939P977020 .

Oct 06, 2007 | Mitsubishi WD-62725 62" Rear Projection...

2 Answers

Replaced lamp and now can't get a picture


Hi Sally Jo, Unit powers on and works properly for a while then shuts off with a red lamp LED (lamp error). Suspect bad lamp part # 915P020010 2. Lamp enable line at J14 pin 6 does not switch to 5 volts after turn on, 12 and 5 volt supplies are good. Suspect the Light Engine part # 939P977010 3. At power on the lamp turns on and off three times and then the unit shuts down with a red lamp LED (lamp error). Replace the Light Engine part # 939P977010 4. Check for 12-volts DC at J-9 connector pin 4 on the Engine Driver PCB, if missing check for an open F9A09 on the Power PCB, if it is open replace F9A09 part # 283P127060 and the Light Engine part # 939P977010 5. Lamp enable line at connector J14 pin 6 on the Engine Driver PCB switches to 5 volts after turn on but does not go back to 0-volts (low) after 5 seconds, 12 and 5 volt supplies are good. Suspect the Light Engine part # 939P977010 6. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 934C148001. Hope this helps!

Sep 17, 2007 | Mitsubishi WD-52327 52" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...