Question about Oregon Scientific Starck Large Music PSL03A Clock Radio

1 Answer

Starck clock wrong time zone

I missed my appointment this morning as Starck clock self-reset during the night to 3 hours earlier. I assume its resetting itself to PST while I live in EST. I do not see anywhere in the manual a description of how to set the right time zone. When you click through all modes in the clock, no option to set time zone comes up. How do you set time zone on Starck clocks?

Posted by on

  • iewebguy Mar 10, 2009

    On sunday March 8, After the time changed... I changed the Hours on the clock manualy to set the correct time, and the next day the clock was 3 hours off.

    I have a:

    Oregon Scientific PSL06A

  • Anonymous Mar 29, 2014

    the clock is off 2 hours and does not reset at night.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

-Make sure clock is in radio sync mode. This is in the manual so won't repeat here.
-Press & release SELECT. Clock time numbers should flash
-Press & hold SELECT. It should enter clock settings mode
-Bottom of screen next to moon phase you should see the current time zone. PST after reset
-UP & DOWN will move through time zones.
-Press & release SELECT when done.
-Each time SELECT is pressed will move to a new setting like 12/24 hour etc.
-Press SELECT until clock numbers stop blinking or leave it alone to return to normal mode
-This should also work on the other Oregon Scientific Starck models.

Posted on Dec 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change clock from PST to Eastern time...?


sadly without knowing what your clock is . we have no idea other than setting the time 4 hours earlier than what PSt is .no clock I ever had had a time zone button .

Jan 02, 2016 | Clock Radios

1 Answer

How do I set the time zone? It run out of battery so when I changed it, the time zone is pacific and I need to change it to mountain time.


To change the time zone, open the control compartment cover on the bottom of the clock. Locate the "Time Zone" switch and set it to the appropriate time zone for your area. Six time zones are programmed into your clock, "A" for Atlantic, "E" for Eastern, "C" for Central, "M" for Mountain, "P" for Pacific and "H" for Hawaiian. Once you've chosen the correct time zone for your Brookstone digital desk clock, you must select whether you want the clock to operate using the 12-hour or 24-hour format. The clock is set to the 12-hour format by default. If you'd like to change the setting to the 24-hour format, locate the "Time Format" switch on the bottom of the clock and flip it to "24-hour".
You can also decide whether to turn your clock's automatic Daylight Savings Time feature on or off. If you turn the feature on, your clock will automatically move forward by one hour at 2:00 a.m. on the first Sunday in March and fall back by one hour at 2:00 a.m. on the first Sunday in November. To choose your preference, locate the "DST" switch on the bottom of the clock and flip it to "Autoicon1.png" or "Off".

Read more: http://www.ehow.com/way_5585650_brookstone-digital-desk-clock-instructions.html#ixzz2phA7kQ1b

Jan 07, 2014 | Brookstone Self-Setting Atomic LCD Clock

2 Answers

After setting the time manually on my rcr-22, the next morning radio's time is 3 hours behind what it should be.


Underneath make sure the switch is set to your time zone. Also check the day light savings setting.

Jul 08, 2011 | Sangean RCR-22 Clock Radio

1 Answer

I have a model CKA-1000 with the 20 ne problem. Last night I pressed the time zone button like it said in the forum and the correct time popped up. This morning, however, it was back at 20 ne. I again...


Hi,

It is asking for the time signal.Try moving the clock/radio to another area in the house. The atomic clock will pick up the signal from Boulder, Colorado is on a frequency of 60 kHz. Unfortunately house current 120 volt is also 60 kHz and may be interfering with the signal.

Hope this manual will help you out solving the problem
The CKA1000 series will have same manual.So you can use this manual for reference.

Click here downlaod manual1

Click here download manual2

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Sep 08, 2010 | Emerson CKA1000 Clock Radio

1 Answer

My WS8001-um jumps ahead three hours after I set it. I seems to be receiving the radio signal, but doesn't reset itself.


I suggest you hit the "reset" button - THEN immediately set YOUR local time zone (I'm assuming you're in Pacific time zone and it defaults to Eastern. So SET ZONE right after you RESET the unit. At 3 or 5 in the morning it should do a complete update for you. There is also a little "Antenna" icon on the unit - you should see that with several 'waves' if you've got a good signal. Also, put the radio/clock on the side of your house that most closely faces Denver, Colorado. Try those and let me know how it goes for you. Thanks,
Johnny

Aug 14, 2009 | La Crosse Technology WS-8001-UM Digital...

1 Answer

Oregon Scientific Stark clock resets itself to PST.


-Press SELECT once and time number should flash.
-Press and hold SELECT and it will enter settings mode for the clock.
-At the bottom of the screen next to the moon phase you should now see PST time zone.
-UP and DOWN keys will change the time zone.
-Press SELECT and other clock settings can be changed.

Jul 26, 2009 | Oregon Scientific Starck Large Music...

1 Answer

Need setting instructions for clock movement


Howard Miller offers this feature: This is how it works.

Automatic Night-Time Silencing Option
Grandfather Clocks will offer a night time shutoff option. There are 3 options on this lever.
1) "Night On" - This will keep the chime striking 24 hours
2) "Night Off" - This position will turn off the chiming between 10:15PM and 7:00AM
3) "Strike" - This position will allow the movement to strike the hour without the Westminster melody if the other Westminster melody lever is turned to Silent.

Hope this helps.

R/David

Apr 05, 2009 | Oregon Scientific Lwb0997110113004...

1 Answer

Changing the time


you can go to http://www2.oregonscientific.com/assets/manuals2/bar338pa.pdf to see or print the user's manual.

If you don't want to get the manual, here's what you do to fix it. . . . .
*note: you need to do this anytime you change the batteries.

1) open the battery cover
2) on the left side you'll see 3 little buttons labeled a)zone, b)C/F c)reset
3) push the reset
4)push the zone button until your time zone is highlighted on the front display
5) look at the front display & if you see a blinking "radio signal" icon at upper left of time numerals
don't do anything else. The time, date, etc. will automatically synchronize your clock with the US Atomic Clock. This could take up to 10 minutes. As long as the "radio signal" icon is blinking, it's working on it. When the icon doesnt' blink, it's set. Cool, huh?
6) if the area you live in can't receive the signal from the Atomic Clock, instead of a blinking "radio signal", you'll see just a bare antennae. Since you probably set your clock manually, that's what it shows now before you do anything.
7) after you push reset & set the time zone do NOT touch any other buttons to set anything!!! (I know it's difficult to leave things alone, but just sit on your hands). Pushing the "clock" button or the up & down arrows will stop the radio signal & change to manual functions. Look at the signal icon mentioned in 5) and 6) above. If you only have the bare antennae icon. . . . . go ahead & set the time/date yourself. You have no signal.

Enjoy your clock!
debkresh

Jan 25, 2009 | Oregon Scientific FM Weather Projection...

2 Answers

Sharper Image Weatherproof Atomic Clock Model OQ007


Press and hold the "Mode" button for a few seconds until the display flashes. The briefly press the Mode button to cycle through each setting. When you get to the "Zone" setting, press the up button to advance the time zone. Press the mode button repeatedly to finish cycling through the settings.

Done.

Nov 03, 2008 | Clock Radios

1 Answer

Clock lost 2 hours...


It is probably picking up the wrong signal or your time zone is set wrong. Take out all of the batteries/ power connection etc. then leave it for a few minutes. Then put everything back in and see what it does. It should automatically reset to the right time. If not then try setting manually.

Nov 20, 2007 | Oregon Scientific RM318PA Clock Radio

Not finding what you are looking for?
Oregon Scientific Starck Large Music PSL03A Clock Radio Logo

904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oregon Scientific Clock Radios Experts

kakima

Level 3 Expert

96396 Answers

The Knight
The Knight

Level 3 Expert

68202 Answers

Tom Chichester

Level 3 Expert

24417 Answers

Are you an Oregon Scientific Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...