Question about Sony SA-VA100 System

1 Answer

Going to standby mode

When i am listening to my home theater sony sa-va100,why is it , after 15 minutes or less it is automatically going to standby mode?Then , i have to switch on again the power .Then it will work again ...So,my main question is WHY IT AUTOMATICALLY GOING TO STANDBY MODE?Thank you !!

Posted by on

  • 30kaine May 12, 2009

    It seems like there is a power save mode that is on and I cannot find.

  • mimi2000 May 26, 2009

    the system is set up to do that for example if your not watching or playing a movie or any other outputs the system kind of gets board! Lol its weird but its a good thing because the system keeps itself from staying on after any event such as DVD video1 Video2 Mode
    over all its a great thing So No Worries

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 547 Answers

Thay are on stand by and not on

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NHT sa-2 amplifier won't go into standby mode after 10 Minutes of no signal


Does the NHT sa-2 have it's own pre-amp? Because I'm wondering if the power off only works when it's own pre-amp is used? So when your receiver is connected it's shut off.

You could try something connected to it's own pre-amp (if it has one) and see if it goes off when there's no signal from that.

Jan 30, 2015 | Audio Players & Recorders

1 Answer

Standby led but cant on power


Look like malfunction AMP PCB Board.Please open top cover, unplug flex cable attached to connector AMP PCB. Try now power- ON the unit.

Jul 24, 2014 | Panasonic Home Theater System System

1 Answer

When I am listening to the radio using my sony HTSS 370 it turns off on its own in about 10 minutes. It says "standby" then turns off.


check that the sleep mode is not set. if it is set for 10 mins this will happen use your remote to switch it off.


I hope this was useful.

Jan 24, 2011 | Sony HTSS370 Theater System

2 Answers

Need connector to a sony sa-va1 right and left speakers


Are you looking for connectors on speakers or need wires that hooked in speaker and home theater system?
Please intimate model number that is written on main home theater system to provide you info about speaker wires.

Jul 11, 2009 | Sony SA-VA1 Rear Speaker

1 Answer

Sony DAV-C990 can't get it off the standby mode


Unplug DAV-C990 from AC outlet for couple of minutes, replug back in and power it up. If problem still exist then home theater has got problem in amplifier output section. Let me know the results to help you more.

Jun 12, 2009 | Sony DAV-C700 System

1 Answer

Panasonic SA-PT560 I was having problems, when being connected with Electricity, light power the flame but all the switches did not react anything when being pressed, until "HELLO" words then was not...


you'll need a tech for this.the pushbutton switches must be corroded or rusted.but there maybe other problems that is related to this.so like i said call a tech.

May 06, 2009 | Panasonic Home Theater System System

2 Answers

I have a Samsung HT-z510 home audio and the wireless receiver for the back speakers stays in standby mode. I have set the mode to cinema but it still stays in standby. What can I check next?


Here is how I reset. Key terms to identify: Main unit, remote unit, transmission card, reset button on remote unit. 1. Unplug both units and remove transmission card from rear of Main unit. 2. Wait five minutes. Insert transmission card in rear of Main. 3. Turn on both units. If units do not communicate, there will be a solid red indicator on remote unit...In this case continue with 4. Use remote and turn off main. 5. Point remote at main and enter the following four digits, holding each down for about a second:  0   1   3   5 6. The main unit should turn on. 7. With remote unit on, press and hold down the reset button for 5 seconds.

Nov 29, 2008 | Audio Players & Recorders

1 Answer

Panasonic Home Theater system SA-HT 1500


Not sure this will work for you, but it did for me. Really simple. Unplug the unit for 5 minutes. Started right up.

Sep 10, 2008 | Panasonic Home Theater System System

1 Answer

Standby mode


Have you got a manual?
If not , try the Sony consumer site for your model.

Jul 07, 2008 | Sony DAV-S300 System

Not finding what you are looking for?
Sony SA-VA100 System Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

101516 Answers

 Grubhead
Grubhead

Level 3 Expert

4751 Answers

The Knight
The Knight

Level 3 Expert

71611 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...