Question about Hitachi FDX Series 43FDX10B 43" Rear Projection Television
Hitachi 53SWX 10B
There is a board on the right side of the tv called the convergence bd
There are little connectors that are on the left of the board
the last one is the power to the convergence Ic's
That is the one that is closest to you. they are little black conectors with wires in them
Carefully lift it up
Then plug the tv back in and see if it fires up
If it does do not run it long
just enogh to see the tubes light
then shut if off
If it goes on
your convergence ic's are Shorted
They have a kit for this tv it is available through local parts distributors
If you can't find it locally just Google HITACHI CONVERGENCE KIT
If you are not good with de-soldering and soldering do not attempt this repair. Remember to replace all the resistors in the kit
If you are not sure about doing this repair you should have your local tv guy do it for you
If it does not go on then I would suspect the regulator in the power supply But
Most of the time it's the ics
Posted on Feb 10, 2009
Tips for a great answer:
Oct 18, 2009 | Hitachi 50V715 50" Rear Projection...
Jul 26, 2009 | Hitachi UltraVision CineForm 55VG825 55"...
May 16, 2009 | Hitachi Projection Televisions
Oct 01, 2008 | Hitachi 55FX20B 55" Rear Projection...
Dec 06, 2007 | Hitachi UltraVision CineForm 55VG825 55"...
Dec 04, 2007 | Hitachi 53UDX10B 53" Rear Projection...
Sep 17, 2007 | Hitachi 53UDX10B 53" Rear Projection...
187 people viewed this question
Usually answered in minutes!