Question about Wacom Intuos3 6x11

2 Answers

My cursor was smooth and easy to draw with, but now it's all shaky and won't draw well!

My cursor gets shaky and begins to make squiggle lines when I try to draw straight lines. It only happens when I'm trying to draw, and doesn't really seem to affect my normal 'mouse' functions. I have no idea what it could be since the tablet was working well at first... I tried changing the sensitivity of the pen tip and I disabled the buttons on the pen in case I was hitting them with my fingers or something, but still no luck. Whenever I try to draw with my pen it also clicks randomly and is now skipping as well. Help? Thanks!

Posted by on

  • 1 more comment 
  • Anonymous May 01, 2008

    I too have this problem, it only affects the drawing side of the my tablet pen. I tried changing the nib but it still does it.

  • kunald4 Oct 17, 2008

    I have been facing the same problem since yesterday. Its not a problem with the pen because the same pen works fine with my other Wacom tablet. I am facing this problem even when using it as a mouse function. It accidentally closes / minimizes windows, even if i hold the pen on a scroll bar the cursor keeps shaking. I even uninstalled the wacom driver/ software and installed the latest one but the problem still persists.

  • shegs Oct 20, 2008

    I am having the problem also... I installed painter x on my vista x64 today and noticed that I couldn't right-click by holding the pen to the tablet like I always could before.

    I looked more closely and notice that the pen is constantly jittery and shaky.


×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The latest drivers have 2 modes...

1 open the driver control panel
2 at the top of the window double click the intuos3 tablet that is giving you problems
3 choose standard mode instead of recognition data

... this is at least what worked for me. I hope it helps.

Posted on Oct 20, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Well... Pen mode seems to be the answer. Thinking about it, it was behaving like a good mouse should...

Posted on Oct 16, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stila Limited Edition La Quill Precision Eye Liner Brush price in india ?


Bold eye liner looks, from tight lines to cat eyes, have never been so easy to achieve. This eyeliner brush is designed to dispense liquid eye liner evenly and precisely in a thin or bold line. Just dip it into the unique, cushion sponge soaked in color (sold separately), and draw across the lid smoothly. The brush acts like a calligraphy pen, depositing the formula effortlessly for chic precise lines.
STILA COSMETICS INDIA

Jul 14, 2016 | Stila Health & Beauty

3 Answers

98 ford ranger idles shaky give gas smooths out floor it revs fine get on road real sluggish and popping only about 45 will only go up to 55 aand more gas u give it will pop and hesitate mind 1 though 3...


Several things may cause this: 1. Bad distributor cap. 2. loose connections on one or more spark plug wires. 3. Cracked coil. 4. Bad injector. 5. Cracked spark plug.
So did you recently pressure wash your engine? It is possible if you did that the cold water may have cracked a spark plug ceramic.
So this is a start. A place for you to begin to look.

Jan 08, 2015 | 1998 Ford Ranger

1 Answer

Stall after start in humid days


Could be the ( warm up 02 sensor)

Oct 15, 2017 | 2002 Toyota Sienna

1 Answer

What says home or end keys


it is primarily used to return the cursor to the beginning of the line where the cursor is located. When the text is not editable, the home key is used to return to the beginning of the document; this can also be done in editable text if the key is pressed along with control.
The home key can also be used to highlight all the characters before the cursor in a certain line if pressed along with shift in editable text.

The home key will take you to the beginning of the line you are on - try it, type a bunch of stuff then hit the Home key and you will be brought to the beginning of the line. If you are in a multi-line document, hitting CTRL+Home will bring you to the start of the entire document.

Similarly, the end key will take you to the end of the line while CTRL+end will take you to the end of the document

Hope this helps. Please rate my response.
Thanks.
Have a good day

Dec 18, 2010 | HP 381068-001 Pavilion ze2000 Keyboard

1 Answer

Black squiggle lines appearing on screen


what happens if you connect the remote to the computer without any batteries are you having the same problem if so try a firmware upgrade if you still have the same issue it's certainly defective contact Logitech to find out how to get it replaced

Jun 08, 2009 | Logitech Harmony One Advanced Universal...

1 Answer

We have a PT61LCX65 Panasonic Tv that has purple squiggle lines


TRY THE MENU FOR A COLOR CONVERSION OPTION TO FIX THAT

Dec 16, 2008 | Panasonic PT-52LCX65 44" HDTV

1 Answer

Odd Cursor Movement with Tablet Pen


hello there, take the batteries out of you maouse and see if the problem persists. also, it seems as if cells phone interfere with some models of mice.

Nov 20, 2008 | Wacom Bamboo Fun USB Tablet with Cordless...

3 Answers

Unstable cursor


Mainly this is due to your power supply adapter problem.It will be stable when the laptop running in battery i.e without adapter connection

Sep 28, 2008 | Wacom Bamboo Fun 5.8" x 3.7" USB Tablet...

4 Answers

Wacom bamboo problems in photoshop CS2


Yeahhh! Installing the new driver completely fixed my problem! Thanks guest!

May 09, 2008 | Computers & Internet

Not finding what you are looking for?
Wacom Intuos3 6x11 Logo

1,143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wacom Computers & Internet Experts

toddmat

Level 1 Expert

44 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

William F. Bryant Jr

Level 1 Expert

49 Answers

Are you a Wacom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...