To get installation drivers of lexmark scanner and printer ( x 1270)

Hi,

If you have lost the installation disk, you can download the installation driver from manufacturer's support website by clicking this link

On the page which opens, select and download the drivers according to the operating system of your computer (Windows Xp/ Vista..)

Thanks for using FixYa.

please visit this link to download your drivers

http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_UK&segment=DOWNLOAD

Without the cd, U can download and install the driver from the Lexmark website here: http://support.lexmark.com/index?page=recommendedDownloads&locale=en&productCode=LEXMARK_X1270&segment=DOWNLOAD&userlocale=EN_US#1

YBC (/\)

http://downloads.lexmark.com/perl/downloads/downloads.cgi
This web address will get you started. Hope it works out for you.

I need a download for a 1270 series Lexmark printer (installation disk). Please help.

plz check the manufacture website and download the drivers

Ok.. Here it is.. Open the link below then click on search by model and type x1270 and press enter. Then choose the OS and download..
http://downloads.lexmark.com/perl/downloads/downloads.cgi

For the Lexmark 1270, go to www.lexmark.com and click on DRIVERS AND DOWNLOADS. Then use the DRIVER FINDER. In SEARCH BY MODEL, type in 1270 and you can choose a driver from there.

Steve

Please follow the link below to get the driver for your printer
http://www.drivershq.com/Drivers/VistaDevices/Lexmark-2500-series-scanner-driver/7990/Drivers.aspx

Please rate accordingly
Thank you
Computerrep

Explanation

A clicking noise from the scanner is probably caused by the driver for the scanner.

Resolution

1.
Download the latest driver from www.lexmark.com.
2.
Once the driver is installed, power the printer off and back on again.

Additional information

The original driver CD for the X1200 printers had part number 17M4160, and some early X1200s were shipped with this driver CD. When the X1200 was manufactured with a new scanbar, the updated driver CD became part number (PN) 17M4360. The updated CD should have been included in the box of new products being shipped. If the X1200 is making a "clicking noise" when you try to scan and the CD PN 17M4160 was installed, you need to download and install the web driver which supports ALL the X1200 printers. NOTE: The X1200 driver CD PN 17M4360 works with ALL X1200s also.

 
to download the drivers::

link::;http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+X1270