Question about Panasonic DMR-EZ47V DVD Recorder/VCR

2 Answers

Setting up Theatre sound to DMR to Sky to TV

Please help in correct set up fro Panasonic DMR-EX98VEBK to a Panasonic Theatre sound SA-PT160 to a Amstrad Sky box DRX550 toa Relisys 42" HDMI

Posted by on

  • derythtony Feb 08, 2009

    I have attached an excel file with rear panel connectros etc to your e.mail address and would very much appreciate a wiring diagram please. I appreciate what you have suggested and will try this if I don't hear from you.

    Many thanks.
    Tony

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Thge basic idea is to wire the Amstrad Sky box DRX550 as one input of the Panasonic SA-PT160; the Panasonic DMR-EX98VEBK would likewise be wired similarly. The output of the SA-PT160 would then go to the Relisys 42". HDMI maybe used when present.

Additionally, pls post/describe what type of connectors are available at the rear of each unit:

  • Amstrad Sky box DRX550;
  • Panasonic DMR-EX98VEBK;
  • Panasonic SA-PT160; and
  • Relisys 42".
Thereafter a wiring diagram could be specifically prepared for you. Would it be safe to assume that you are also considering recording some programs from the DRX550 to the DMR-EX98VEBK?

Good luck and thank you for using FixYa.

Posted on Feb 08, 2009

  • Louie  Role
    Louie Role Feb 08, 2009

    Appreciate the rating. I have emailed FixYa likewise to track your email and hopefully forward it to me. Soon as that is made available, I would prepare a wiring diagram.

  • Louie  Role
    Louie Role Feb 09, 2009

    Hi again,

    Fixya's Premium Support forwarded your email with attachment. Pls try:


    • Sky Amstrad DRX550 TV Scart > Scart 1 of Relisys RLT42DV30 (B);

    • Relisys RLT42DV30 (B) Scart 2 > AV Scart of Panasonic Cinema Sound SA-PT160;

    • Panasonic DMR-EX98VEBK Scart AV1 > VCR Scart of Sky Amstrad DRX550.
    Alternately or additionally:

    • Sky Amstrad DRX550 RF Out 1 > RF in of Panasonic DMR-EX98VEBK

    • Panasonic DMR-EX98VEBK RF out > Aerial in of Relisys RLT42DV30 (B)

    • Relisys RLT42DV30 (B) Scart 1 or 2 > AV Scart of Panasonic Cinema Sound SA-PT160.
    Would appreciate updates on the developments.

    Cheers.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 763 Answers

Sir, please refer the connection and settings from the manual of each devices and if you dont have ill provide one for you. check if their something youve missed.

thank you for using fixya
CHARCOIS

Posted on Feb 08, 2009

  • Charris Suaybaguio
    Charris Suaybaguio Feb 08, 2009

    by the way check also their compatibilities

    CHARCOIS


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram to set up the Panasonic DMR EZ47V DVD/Video recorder


Look at rear of the Combo and you will observe input and output RCA connections.Using RCA leads, hookup the Av output of the Panasonic to the audio/video input of the LCD . Connect the AV output of the Sky box to the AV input of the Panasonic combo.

Hope it will cover the matter

good luck

Jan 29, 2010 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Have DVD recorder (DMR-EZ27EB)How can I record from a satellite program when the DVD recorder is connected to the AV 2 input and the satellite via SKY box is connected to the AV1 input


Connect the sky to the tv using a scart from the one marked tv on the sky box.Connect a scart from the one marked vcr on the sky box to av2 on the dvd.You then select av2 as your record channel on the dvd.

Dec 08, 2009 | Panasonic DMR-E55 DVD Recorder

1 Answer

Picture from analog tv signal is not sharp


I have this same machine, you did'nt mention what input you are using (composite, S-Video, component or HDMI) or what type of display you have (CRT, LCD, Plasma etc.).
If your T.V. has a HDMI input I recommend using that, if not and it's of fairly recent vintage use the component inputs (not to be confused with composite video inputs, or yellow RCA-type input).or at the very least use the S-Video input.
In the setup menu (on screen) try setting the "TV Screen" option to the 480p setting and if you are using the HDMI input try setting that to the highest resolution your T.V. has or set it to "Auto"
Finally in the on screen video menu select the "Video" setting and set the "Still Mode" option to automatic, and the "Output Level" to lighter or darker whatever your preference is.
Remember...Always use HDMI or component video inputs on your television (if it has those inputs)!
Hope this helps!
Joe

Nov 19, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

I have just bought a Sony DAV-dz260 home theatre system. I connected it viz HDMI to my 1080p tv and it works fine. I also have a Sony PS3 connected via HDMI to my TV and this works fine too. I have...


i have the same dav dz260 and all my stuff works on mine. this is how i set it up i have conected y dz to the tv via scart and my sky and ps3 via hdmi cable. to get sound from sky and ps3 i conected a optical cable from the dz260 to the tv and when i want sound for sky or ps3 all i did was change the function on the dz260 to tv and the tv setting to the hdmi im using and hey presto sound hope it helps

Nov 11, 2008 | DVD & Blu-Ray Players

1 Answer

Suddenly cannot record DVD after years


Hi,

Apologies for the delay in response. Your concern was just brought to my attention.

To your recording, based on your second posting (and would appreciate corrective information where applicable), your system is:
  • Cable provider > Cable Decoder Box > Panasonic DMR-E75V > TV (equipment setup)
  • single coaxial cable > yellow, red & white > yellow, red & white (wiring setup).
With your indulgence, a couple clarifying questions:
  • to watch the Panasonic when you play DVDs, to what channel or source or setting must the TV be set to?
  • to record a TV program/channel, to what channel or source or setting must the Panasonic be set to?
  • what is the brand and model of your Cable Decoder Box?
Initially, pls try:
  • play any known good DVD disc/movie. power on the TV and set to watch said movie;
  • without changing anything on the TV, STOP the playing of the DVD;
  • try changing channel on your Cable Decoder Box's remote;
  • pls post back result(s); or
  • do the above steps again but before changing the channels on the decoder box's remote;
  • try changing/cycling through the different input/source of the Panasonic DVD;
  • again post back result(s).
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Oct 10, 2008 | Panasonic DMR-E75V DVD Player/VCR

2 Answers

Connections for DVD Recorder/LCD TV/ SKY PLUS


Connect the AV output of the Sky box to the AV input of the Panasonic combo.Look at rear of the Combo and you will observe input and output RCA connections.Using RCA leads, hookup the Av output of the Panasonic to the audio/video input of the Sony tv. Power up Appliances, and you should be OK.

Apr 11, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

CONNNECTING THE DMR-EZ475V TO A TV, THEATRE SYSTEM AND CABLE BOX


Solution #2 posted on Feb 09, 2008 0%20stars_w.png
noavatar_s.png jdrrwoods
Rank:wizard_s.gif Wiz
Rating: 84%, 12 votes

http://www.altex.com/product_info.php?products_id=9207 here is a link to a audio / video switch box you need one of these make sure it has several audio video in and at least one audio/video out
hook all you rca1.gif cables up to the audio/video in from the cable box, tv, and dvd/vcr combo then out to the surround sound youll also need to get some rca cable splitters for the out so you can run it back to the audio/video in to the tv as well as the surround sound here is alink to what they look like
http://www.altex.com/product_info.php?cPath=344&products_id=6201
youll need thre of these of course when hooking it up dont pay attention to the color on these just the ones from the tv and surround sound and thats it your done it will all work if you want it to were you dont have to get up and push a button everytime most of them if you push all the buttons in at one time theyll stay like that

Feb 08, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

2 Answers

SETTING UP TJE PANASONIC DMR TO OTHER COMPONENTS


if studio audio facility in tv there [are] hence remaining to install just input channel of output but if there is no having to suround efec,thank.........
www.modifmax.com.

Feb 08, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

Not finding what you are looking for?
Panasonic DMR-EZ47V DVD Recorder/VCR Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic DVD & Blu-Ray Players Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...