Question about Onkyo TX-SR606 Receiver
I just got a new Onkyo tx-sr706. When I turn it on, it immediatly turns off (about 3 seconds).
I followed the manual (which was strange to me that this was a problem listed in the troubleshooting part of the manual) unplugged it for one hour. Plugged it back in, same problem.
Is there a solution?
Also, I bought it from the bankrupt Circuit City, but it was an unopened box.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The problem is not with the inputs. This unit is in protect because a problem has been detected in the output section. Try disconnecting the speaker wires and turning it on. If the unit remains on, there is a short in one of the speaker wires. If the unit still shuts down, there is an internal problem that will require repair. It sounds like this is a new piece. If so, it should be covered under warranty.
Keep us posted,
Posted on Jul 28, 2008
SOURCE: Onkyo TX-DS989 not staying on
This sounds like the action of some protection circuit that is monitoring some condition or voltage that isn't within its design limits. If it was mine, I'd look for an Onkyo forum to see if others have experienced the same problem.
Posted on Jan 08, 2009
SOURCE: Onkyo TX-SR706 monitor out
Monitor out is non assignable. Monitor out is for the purpose of putting your selected devices audion and video out to the television or display. For assinment of out putting different devices that what you are listening to on the main stereo unit you need to have a 2nd room or zone output.
Posted on Jan 09, 2009
This is a problem with the surround sound processing. Effectively the digital signal is not being processed properly. Since this unit is so new, return it and request either an exchange or at least warranty service. The DSP board will likely be replaced.
Posted on Feb 17, 2009
Try some troubleshooting to check whether its the turntable or the the receiver.
What happens if you exchange the output cables of the turntable from left to right. Does the problem shift?
Does the sound changes from left to right speaker?
Similarly try on the inputs of the Receiver.. does the problem shift...?
This way you will be able to isolate the problem, whether with the receiver or the turntable....
Let me know, we can trouble shoot it further....
Posted on Mar 08, 2009
Tips for a great answer:
Mar 02, 2017 | Onkyo Audio Players & Recorders
Dec 16, 2015 | Onkyo TX-SR706 Receiver
Jul 13, 2015 | Onkyo TX-SR706 Receiver
Dec 11, 2010 | Onkyo TX-SR706 Receiver
Mar 08, 2009 | Onkyo TX-SR705 Receiver
215 people viewed this question
Usually answered in minutes!