Question about LG WM-1832C Front Load Washer

1 Answer

Noisy on spin cycle LG WM1832CW

Sounds to me like worn bearings, I would also like a service manual for this machine LG WM1832CW

Posted by on

  • 1 more comment 
  • werallens Feb 09, 2009

    My kids think it sounds like an airplane taking off.  It is terrible.  The noise prevents me from doing a load of laundry at bedtime and when someone may be coming over.  

  • Anonymous Feb 16, 2009

    i also have the same problem the machine makes a lot of noise .

    it looks like it is off its track, the motor turns and the barrell seems to look of track, and it is making a lot of noise.

    can someone lead me to some manuals or a service manual, im quite handy .

    i went to the website and they found no manuals for my model. wm 1832 cw.

    i believe i have to remove and go inside the inclosed barrel and do some replacing of bearings or something.

    Thanks........Robert



  • dernotte Feb 28, 2009

    I got the same problem. The LG guy told me the issue was due to the inapropriate soap I am using. I should use HE soap only. this is mandatory now on new LG washing machine , and also other brand

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

This is joyce
Go to lg.com and download your manuel put in your model #
thanks
joyce

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bumoing sound in spin cycle


check to be certain your suspension springs havent shifted and or come off their mounts. also make sure the belt is properly tensioned, the washer is level, and that the bearings have not worn out.

Aug 14, 2012 | Whirlpool Washing Machines

1 Answer

LG WM1832CW IT IS VERY LOUD WHEN IT SPIN FAST LIKE BEARING GOING OUT ARE SOMETHING LIKE THAT


Hi...if it sounds like like a jet taking off?? Yes you have a inner tub and outter tubs gone bad

Mar 23, 2011 | LG Washing Machines

1 Answer

On the spin cycle the machine is making a lot of noise. Could something be lose on worn to cause this. We have tried to stop the machine and reposition the load, but it did not help. The machine is just...


The spin bearing or basket drive may be worn or seized. These components allow the inner tub to spin freely inside the outer tub. When this is the problem, you usually hear a loud sound during the spin cycle.If the bearing is getting out of its way then its faulty weak motor causing this.Check out both the bearing and the motor. You can get required parts from www.repairclinic.com
Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Aug 31, 2010 | LG WD-3243RHD Front Load Washer / Dryer

1 Answer

Very noisy on spin cycle only


Hi, please describe the type of noise you are hearing. If it is a grinding type noise, it is likely to be the drum bearing.

Oct 25, 2009 | LG WM1814CW Front Load Washer

1 Answer

Washer noisy in spin cycle


It sounds like your drum bearings are about to go. I am not familiar with this model, but I would assume it is pretty much like all other front-loaders. Bearing kits can be purchased for all models but there is a great variance in cost eg. in europe €25-€75. It is also quite a difficult job to undertake for the sunday diy enthusiast as it involves stripping down the machine and removing the drum. If you are going to repair the machine as opposed to replacing it I would strongly advise doing it asap and continued use will cause the bearings to collapse rendering the machine irrepairable. Hope this helps.

Jun 27, 2009 | LG WD-1280FHD Front Load Washer

1 Answer

LG wm1832cw shaking bad in spin after move


manual,,lg.com...but befroe youdo that,,put the unit in spin ,,get a small wrench or the wrench that came with the installation pack..now when unit goes into high spin the fastest spin,,tighten the lock nuts on the legs one at a time dont turn the leg itself,,just the lock nut on the legs,,it might take two spin cycles but you will get it ..tighten all the way uop to the base,,,onthejob

Jan 09, 2009 | Washing Machines

1 Answer

LG WM1832CW


hi linda from what you describe? the machine does wash cycle? but won't spin cycle? if the machine is a couple of yrs old ? it may well be the motor that runs machine is in need of some new brushes fitting ? they are not expensive and may be worn too low to activate the higher revolutions needed for spin cycle it is not a difficult job to drop motor off and check/replace if you have a good male/ friend? with elec competence ? have found this problem on other machines and most recent zanusi cost £5 for 2x new brushes as apposed to the £££££s the lady was estimated for a timer ? by plumber so why not check it out b4 you part with money ? best wishes/luck

Oct 16, 2008 | LG WM-2277HW Front Load Washer

1 Answer

LG direct drive washing machine is getting increasingly noisy when at the spin stage


generally when a machine gets noisy in spin cycle it is due to bearings being worn open the door with the machine empty and try lifting the the drum upwards if it moves then it will be the bearings

Jul 12, 2008 | Washing Machines

1 Answer

Lg wm1832cw front load washer


One of 2 things may be causing the loud noise.  Either the rear bearing on the drum has failed and will need to be replaced (very expensive) or the drain pump has a bearing problem and is making a very loud noise when it is draining (not too expensive).  Either way, you will need a qualified LG technician to diagnose and repair the problem.

Jun 14, 2008 | LG WM-1832C Front Load Washer

1 Answer

Noisy Spin Cycle


frigidaire frontloader infamous for rear bearings going bad,NOISY is probable an understatement. I wold open door and grab hold of inner tub, try to lift it up a bit, problably a bit of play in there, thats an indication of bearing failure, call authorized servicer possible warr parts

Feb 22, 2008 | Frigidaire FWT449

Not finding what you are looking for?
LG WM-1832C Front Load Washer Logo

1,121 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...