Question about Texas Instruments TI-83 Plus Calculator

Once I type info into L1 & L2, how do I clear?

2nd +

delete

all

scroll to L1and L2

press delete or enter (i have an 82)

Posted on Feb 16, 2009

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

L1, L2, L3?

If you are doing statistics, Set MODE to 3. Stat.

Choose 1-Var or any regression model. If you press 1-var you will have two lists x and frequency.

For any regression model you have 3 lists x, y, and Freq(uency).

L1, L2, L3, are list names in the TI 83/84 Plus and the Casio graphing calculators.

I hope it helps

If you are doing statistics, Set MODE to 3. Stat.

Choose 1-Var or any regression model. If you press 1-var you will have two lists x and frequency.

For any regression model you have 3 lists x, y, and Freq(uency).

L1, L2, L3, are list names in the TI 83/84 Plus and the Casio graphing calculators.

I hope it helps

Oct 26, 2013 | Casio fx-115ES Plus Scientific Calculator

I am not sure I understand but if it the same problem as in your other posted question, here is what I wrote.

Are the data in L1 and l2 in any way related? If they are (being x-values and y-values of some data set) then you need to do regression analysis (2-var stats)

If they are not related (connected) you can calculate the mean of each group separately.

Do 1-var stat by specifying the L1 list first (may be the default), get your average of the values in L1. Then you can do 1-var stat on the data in L2 by specifying the list L2 on the command line.

**1-var L2 ENTER**

Note: What I am describing here is valid for the TI 83 Plus/TI84 Plus, but I suspect the steps are similar to the TI 82.

Are the data in L1 and l2 in any way related? If they are (being x-values and y-values of some data set) then you need to do regression analysis (2-var stats)

If they are not related (connected) you can calculate the mean of each group separately.

Do 1-var stat by specifying the L1 list first (may be the default), get your average of the values in L1. Then you can do 1-var stat on the data in L2 by specifying the list L2 on the command line.

Note: What I am describing here is valid for the TI 83 Plus/TI84 Plus, but I suspect the steps are similar to the TI 82.

Oct 08, 2013 | Texas Instruments TI-82 Calculator

Are the data in L1 and l2 in any way related? If they are (being x-values and y-values of some data set) then you need to do regression analysis (2-var stats)

If they are not related (connected) you can calculate the mean of each group separately.

Do 1-var stat by specifying the L1 list first (may be the default), get your average of the values in L1. Then you can do 1-var stat on the data in L2 by specifying the list L2 on the command line.

**1-var L2 ENTER**

Note: What I am describing here is valid for the TI 83 Plus/TI84 Plus, but I suspect the steps are similar to the TI 82.

If they are not related (connected) you can calculate the mean of each group separately.

Do 1-var stat by specifying the L1 list first (may be the default), get your average of the values in L1. Then you can do 1-var stat on the data in L2 by specifying the list L2 on the command line.

Note: What I am describing here is valid for the TI 83 Plus/TI84 Plus, but I suspect the steps are similar to the TI 82.

Oct 08, 2013 | Texas Instruments TI-82 Calculator

You can recreate lists at any time. To create a new and empty L1, press

2ND [{] STO 2ND [L1]

{ is the shifted function of the ( key, STO is just to the left of the 1 and 4 keys, and L1 is the shifted function of the 1 key.

2ND [{] STO 2ND [L1]

{ is the shifted function of the ( key, STO is just to the left of the 1 and 4 keys, and L1 is the shifted function of the 1 key.

May 17, 2012 | Texas Instruments TI-83 Plus Calculator

what is the data you are inputting? try to make sure they're aren't any symbols

May 04, 2011 | Texas Instruments TI-83 Plus Calculator

You can't manipulate lists like that.

{5,10,15,20,25}[STO>]L1

{5,5,5,5,5}[STO>]L2

These will input your lists properly. I'm not sure what you're trying to do, but if you're just trying to divide every entry in L1 by 5 and store it in L3, you could accomplish that with:

{5,10,15,20,25}[STO>]L1

L1/3[STO>]L3

Also, this page gives a lot of helpful tips on using lists on a TI-83.

http://pages.central.edu/emp/lintont/ti83/html/lists.pdf

Hope this helps!

{5,10,15,20,25}[STO>]L1

{5,5,5,5,5}[STO>]L2

These will input your lists properly. I'm not sure what you're trying to do, but if you're just trying to divide every entry in L1 by 5 and store it in L3, you could accomplish that with:

{5,10,15,20,25}[STO>]L1

L1/3[STO>]L3

Also, this page gives a lot of helpful tips on using lists on a TI-83.

http://pages.central.edu/emp/lintont/ti83/html/lists.pdf

Hope this helps!

Mar 30, 2011 | Texas Instruments TI-83 Plus Calculator

There is no L7 list. You can put your data in any available list. You can even create your own lists.

Anyway, to recover the L1,L2,L3, and L4,

Press [STAT][5:SetUpEdidor] [ENTER]

Calculator displays Done.

Press [STAT]. Under Menu EDIT, Press [1:Edit]

The List editor opens the L1,L2, etc. liststo let you enter your data.

Anyway, to recover the L1,L2,L3, and L4,

Press [STAT][5:SetUpEdidor] [ENTER]

Calculator displays Done.

Press [STAT]. Under Menu EDIT, Press [1:Edit]

The List editor opens the L1,L2, etc. liststo let you enter your data.

Feb 04, 2010 | Texas Instruments TI-83 Plus Calculator

Hello,

I do not understantd what you mean by the so on cells words.

1. To clear all lists

Press [2nd][CATALOG] to access the list of commands. Scroll down till the fat right arrow point to ClrAllLists. Press [ENTER][ENTER] to execute the command. Screen displays Done.

2. To clear the list L1 completely

Press [STAT][4:ClrList]; command echoe on main screen as ClrList . You must specify what list you want to clear. To clear L1, you insert at the place of the cursor L1 and press [ENTER]. But to insert L1, you press [2nd][1] (L1) and press [ENTER].

3. Clear L1 and L2 completely you do as in point 2.

Press [STAT][4:ClrList] [2nd][1] [,] [2nd] 2 (L2). On screen command appears as ClrList L1, L2. Press [ENTER] to execute it. Screen displays Done

4. To clear a number in a cell.

Press [STAT][1:Edit]. The list editor opens. Move cursor to the top of the list, say L1. and highlight the heading

The whole list appears on the commande/edit line.

Press [ENTER].

Cursor moves to the entry line where all elements on the list appear between { }.

Use the cursor to the value you want to remove and press [DEL]. Do not leave unneeded commas.

Hope it helps.

I do not understantd what you mean by the so on cells words.

1. To clear all lists

Press [2nd][CATALOG] to access the list of commands. Scroll down till the fat right arrow point to ClrAllLists. Press [ENTER][ENTER] to execute the command. Screen displays Done.

2. To clear the list L1 completely

Press [STAT][4:ClrList]; command echoe on main screen as ClrList . You must specify what list you want to clear. To clear L1, you insert at the place of the cursor L1 and press [ENTER]. But to insert L1, you press [2nd][1] (L1) and press [ENTER].

3. Clear L1 and L2 completely you do as in point 2.

Press [STAT][4:ClrList] [2nd][1] [,] [2nd] 2 (L2). On screen command appears as ClrList L1, L2. Press [ENTER] to execute it. Screen displays Done

4. To clear a number in a cell.

Press [STAT][1:Edit]. The list editor opens. Move cursor to the top of the list, say L1. and highlight the heading

The whole list appears on the commande/edit line.

Press [ENTER].

Cursor moves to the entry line where all elements on the list appear between { }.

Use the cursor to the value you want to remove and press [DEL]. Do not leave unneeded commas.

Hope it helps.

Oct 21, 2009 | Texas Instruments TI-83 Plus Calculator

The tables will not say Y specifically, they only say L1, L2, L3, etc. UNLESS you type in an equation in the "Y=" button menu. When you type an equation in on that page, and then hit "2nd" "GRAPH", you will get X and Y values for that equation.

Jan 19, 2009 | Texas Instruments TI-83 Plus Calculator

Here's what you do in a TI-83 or TI-84:

Go to STAT > 1: Edit > UP ARROW > 2ND > INS > *List Name* > ENTER

Hope that helps!

Go to STAT > 1: Edit > UP ARROW > 2ND > INS > *List Name* > ENTER

Hope that helps!

Oct 18, 2007 | Texas Instruments TI-84 Plus Calculator

569 people viewed this question

Usually answered in minutes!

×