Question about AEG Washing Machines

1 Answer

Won't drain!! Our hotpoint washing machine starts a normal wash, and then after about 15 minutes it beeps and says on the screen 'check outlet pipe' we have checked all the fixings and the pipe is definitly not blocked!!! please help???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • AEG Master
  • 3,463 Answers

The washer has either a blocked or faulty pump, or a blocked filter.
Depending on the model number, the filter is either at the front bottom behind a removeable panel, or at the rear of the washer.
If you can't find a filter at the front, then remove lower rear cover of washer, remove the large black hose fastened to the bottom of the tub. Be careful, as there will be water run out.

Remove and clean plastic filter in hose.check pump is not blocked.
Refit filter and hose.
Please rate my fixya solution.
Thankyou.

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I stop my washing machine door alarm beeping?


do this and fix it. God bless you
However read the instr. manual section troubleshooting /
if doesnot have download from www.fitness.manualsonline.com
The processes below will get most controls unlocked.

Duet Washer - Press and hold the END OF CYCLE SIGNAL button for 15 seconds.

Whirlpool Duet Dryer - Press and hold the END OF CYCLE SIGNAL button for 15 seconds.

Kenmore Elite Washer - Press and hold the DRAIN/SPIN button for 15 seconds.

Some Models- Press and hold the control lock button for 15 seconds.

If none of these work try unplugging for 5 minutes

Sep 28, 2012 | Hotpoint WMA74 Front Load Washer

1 Answer

Lights flashing on Hotpoint BHWM129


I had a similar problem with my Hotpoint BHWM 129 washing machine. The washer would not spin or drain properly and all the lights flashed after a wash cycle.
The solution was to pull the washer out and UNBLOCK the drain pipe which was crushed AND filled with 'gunk'. Once the crushed pipe was massaged back to normal size and the gunk was removed my problem was fixed. Not a nice job but I was going to ring HOTPOINT at £125 a call out fee so I am happy. I hope this helps someone else in time.

Apr 30, 2012 | Hotpoint Washing Machines

1 Answer

Hotpoint WMA76 - been on a normal wash cycle but wont spin to drain water - cycle finished, drum full of water and cant empty. How do we empty it to open machine?


Remove drain outlet hose from point where it discharges into waste pipe, and lay the hose down into a bucket or bowl, this should let the water syphon out, enabling you to open the door.

Dec 29, 2010 | Hotpoint WMA76 Front Load Washer

1 Answer

After starting,water goes into the outlet pipe then immediatley leakes out directly under the oulet pipe at the bottom of machine.


The outlet pipe must be routed higher than the top of the washer or it will always drain. this is normal. The leak, however is not, something may be damaged, open and inspect.

Sep 26, 2010 | Hotpoint WMA64 Front Load Washer

1 Answer

Hotpoint wma30. Drum not draining water. Have


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

May 31, 2010 | Hotpoint WMA30 Front Load Washer

1 Answer

Water goes in then straight out of the waste pipe


The waste pipe is probably too low, this is letting the water syphon out.
Try lifting the outlet pipe higher up, this should solve the prob.
There is a line on the back of the washer, which incates the min hieght for drain outlet.
Please rate my solution.
Thanks.

Nov 24, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

When I start my washing machine it is just draining continuosly.


machine continuously draining needs the drai pipe lower than the machine, push it further into the outlet drain. from Alan

Feb 17, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Outlet Pipe


Your machine has detected a problem with draining. The place to check is the filter located at rear of machine.To access it remove plate at bottom rear of machine & you will see a black pipe hanging vertically from the drum secured by a spring clip.The filter is in this pipe. If this is clear take off other end & check pump is not obstructed.Be aware that there will be water in these pipes so may be wise to take machine outside.Let me know if problem persists.

Nov 18, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Do anyone know what e11 mean on hotpoint wd71 pls


It means "No hot/cold fill" and recommends - Check the water supply, inlet valve and hot and cold hose connections.

Mar 27, 2008 | Washing Machines

2 Answers

Hotpoint aquarius wf740


Sounds like water pressure could be low or inlet pipe is kinked.

F04: possible filling or water level problem. Check water inlet pipe (or shut-off valve), or the outlet pipe, or the pump or pump filter if accessible (check for blockages or foreign objects). Also could be the water valve solenoid weak, causing filling to be too slow.

F05: possible draining (pumping off) problem, check the pump filter, or pump, outlet pipe, or U-BEND.

Don't forget to rate!

Feb 27, 2008 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...