Question about Emerson MW8107WA Microwave Oven
Please answer for this
Test the high voltage capacitor,
the rectifier diode.or the magnetron. If all this are fine, test the control board.
If it additionally does not spin and no light, then check also the door switch and fuse.
The diode and capacitors can br tested. The capacitor must be allowed discharge before testing, or you risk to get electrocuted, even if power is off. Capacitors can get discharged by shorting their two contacts.
Replace the magnetron if the checks and all of the high voltage component tests are good, but the unit still does not heat.
All locations, and description of this parts can be located using the diagram here: Counter top.
Parts must be tested to find out what is wrong.
Remember that microwaves are potentially dangerous devices if not repaired properly, the job must be done by a competent person.
A microwave energy leakage test must always be performed when the oven is serviced for any reason.
Regarding parts, contact the seller here to purchase parts. (here in UK).
Posted on Apr 27, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 14, 2011 | Hoover Microwave Ovens
Oct 15, 2010 | Microwave Ovens
Oct 30, 2009 | GE Microwave Ovens
Oct 30, 2009 | Microwave Ovens
Oct 30, 2009 | Dacor DCM24 Convection/Microwave Oven
Oct 10, 2009 | GE JVM1630 Microwave Oven
Oct 10, 2009 | Emerson MW8103SS Microwave Oven
Oct 09, 2009 | GE Profile Spacemaker 1.8 Cu. Ft....
Oct 08, 2009 | GE Microwave Ovens
Oct 05, 2009 | Whirlpool Microwave Ovens
129 people viewed this question
Usually answered in minutes!